98.5% FC of Graphite Petroleum Coke for Steelmaking
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 24 m.t.
- Supply Capability:
- 5040 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
The High-purity Graphitized Petroleum Coke is made from high quality petroleum coke under a temperature of 2800°C. As a high-purity carbon material, it has characteristics of high fixed carbon content, low sulfur, low ash, low porosity, high absorptive character , no residue will be left and save production cost etc. it is playing more and more important role in the industry
This product can be used as carbon raiser (Recarburizer) to produce high quality steel, special steel, cast iron and alloy or other related industry. We can get high quality steel if use it. It can also be used in plastic and rubber as an additive.
Features
The graphitized petroleum coke powder (grain) is made by graphitization heat treatment of high-quality low-ash petroleum coke at high temperature of 2800 ° C or above in vacuum. The product is featured by high carbon content, low hardness, high temperature resistance, large porosity and low heat conductivity coefficient. Compared with the traditional natural graphite and calcined coke, it can obviously improve caking property and stabilize friction coefficient, maintains the stable and comfortable braking process, and reduce the damage to mating plate surface, brake noise, wear and cost, and is an ideal material for the friction material plant.
In order to control the package and quality, we send people to inspect the loading at loading port and take samples for third party inspection for everyshipment, and will keep customers updated about the loading condition and the inspection result.
Graphite petroleum coke is used in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, graphite petroleum coke has high absorptive character, no residue will be left, save production cost.
Specifications
Products | GPC | |
F.C.% | 98.5MIN | 98MIN |
ASH % | 0.8MAX | 1MAX |
V.M.% | 0.7 MAX | 1 MAX |
SULFUR % | 0. 05MAX | 0.1MAX |
MOISTURE % | 0.5MAX | 0.5MAX |
SIZE: | 1-5MM 90% min | |
Package | By MT jumbo Bag | |
Pictures
FAQ
1, Usage: used to improve the Carbon content in steel-melting and Ductile iron foundry
2, Characteristic: high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3, apply: Used in electric furnace steel smelting and cast-iron for improving the carbon content
- Q:Does the pencil core go into the baby's face to keep the skin tight?
- If it's obvious, you need to go to the hospital early, otherwise the macula can last for a long time (a few years, or even ten years). This I have experienced (hand stabbed too) for at least more than 10 years, black.
- Q:Is oxygen allowed in the oxygen pipe?
- To tell the truth, the graphite powder also belongs to small particles, if the medical oxygen pipe can not have graphite, if industrial oxygen, can have the physical and chemical properties of graphite, graphite and other stable, will not react, to a certain extent is a kind of preservatives, prevent oxidation function.
- Q:It's hard to remove a lot of graphite powder on the glass cake. Who has a good way to remove the graphite powder above?
- Suggestion: use a certain amount of concentrated nitric acid infiltrated graphite part, nitrate solution the best there is a certain amount of 1-2 weeks (timing can also be placed with a glass rod, pour stirred) acid, diluted with water to acid and then scrub brush. Because the temperature nitric acid reaction is very slow, but the long-term infiltration, the graphite surface. Especially with the glass contact surfaces may be immersed in a small amount of acid, oxidation, then scrub may have the effect.
- Q:Is the graphite electrode broken like graphite, fossil oil, coke and graphite powder?
- The graphite powder is soft, black and gray, greasy and polluting paper. Hardness is 1~2, along the vertical direction with the increase of impurities, its hardness can be increased to 3~5. The specific gravity is 1.9 ~ 2.3. Under isolated oxygen conditions, the melting point is above 3000 degrees Celsius and is one of the most refractory minerals. At room temperature, the chemical properties of stone toner are relatively stable, insoluble in water, dilute acid, dilute alkali and organic solvents. The material has high temperature resistance and conductivity, and can be used as refractory materials, conductive materials, wear-resistant and lubricating materials.
- Q:Why is there a range of electrode powder powder resistivity? The reasons for the high and low are not good.
- A cylinder is inserted in the pipe, and the cross section of the pipe is slightly smaller than the inner diameter of the sample tube. The lower cylinder is fixed on the base of the instrument, and the upper cylinder can move up and down in the tube as a prop to pressurize the sample. The sample is located in the insulating casing on the cylinder between the positive and negative pole and galvanometer millivoltmeter are respectively connected to the drum two cylinder, rotary measuring height, driven by the leading screw rod lifting rod to balance, balance level, sample by 3.92MPa pressure, then switch on the current, the current adjustment into the sample to 300mA, then open the switch millivoltmeter,
- Q:Graphite powder what is the difference?
- So the pencils are not made of lead, but made of graphite, which prevents the children from damaging their bodies by biting their pencil heads. Hope to adopt!
- Q:What graphite powder made of graphite products, high hardness?! Wear-resisting！ Good moisture! It can be made into graphite products at 100-200 degrees high temperature
- Graphite powder is divided into natural graphite powder and artificial graphite powder, graphite powder made of graphite products, you need to add binders, binders useful for a variety of resins, asphalt and so on.
- Q:Does the graphite powder cause explosion? If so, how to prevent the production of graphite products in the workshop?
- Dust produced in the process of production of some factories and mines, especially the dust produced in the processing of some organic matters, will explode and burn under certain conditions.(2) adequate air and oxidizing agents;(3) there is fire or strong vibration and friction.Such as effective ventilation and biological film, dust suppression technology, integrated dust suppression technology, dust removal measures, smoking and fire operations are prohibited. A pressure relief valve or other device is arranged in the outer shell of the equipment, and an explosion containment system is adopted. For factories with dust explosion hazards, the design must be strictly carried out according to the technical grade of explosion protection, and ventilation and dust removal systems shall be installed separately. Often wet cleaning workshop floor and equipment, to prevent dust flying and gathering. Ensure that the system has a good airtight, if necessary, in airtight containers or pipes in the flammable dust filled with nitrogen, carbon dioxide and other gases, in order to reduce the content of oxygen, dust suppression explosion.
- Q:How to deal with graphite powder? Anyone recycle it?
- We have a lot of graphite, and now we have it
- Q:Method for identifying iron powder, aluminium powder and graphite powder
- 1. aluminum powder is silver, black substance attract rest with a magnet that attracted iron, not be attracted to the graphite2. Add equal mass, such as concentration of dilute hydrochloric acid, the gas is fast aluminum powder, slow iron, and do not produce gas is graphite.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
98.5% FC of Graphite Petroleum Coke for Steelmaking
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 24 m.t.
- Supply Capability:
- 5040 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
