Agriculture Labyrinth Type PE DRIP TAPE for Farm Irrigation
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 199 m²
- Supply Capability:
- 1999999 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Agriculture Labyrinth Type PE DRIP TAPE for Farm Irrigation
Product Features of Irrigation Tape distance 30cm Good Quality :
1. The Water Margin: unilateral 1~3 meters, 2~6 meters bilateral
2. Save 50-80% labor, 40-80% water, 50% fertilizer and increase production 10-30%
3. High quality raw materials of high strength PE from the German Basf Inc and ultraviolet resistance ratio
4. Laboratory Simulated Ecological testing anti-aging life of 3 years, the actual use of the ageing time longer; low supporting the water pressure, less energy consumption
5. Supporting pipeline water supply pressure [2~3Bar] lower, low energy consumption
6. Scientific aperture distribution design, smooth aperture not easy to block and high spraying uniformity, ensure the normal use in breezeless and breeze day, ideal for drizzle days
7. Designed for flexible use,easy to coil, no shortage for length
8. Uniform irrigation, large irrigation area, increase production
9. Products passed the inspection of the national authority Chinese inspection department
10. Easy storage and transportation, simple and convenient for installation and the operation
Agriculture Labyrinth Type PE DRIP TAPE for Farm Irrigation
1.Breif introduction
Adopt the high quality low density polyethylene resin joined the anti-aging masterbatch by extrusion molding process of plastic pipe.
Material: Low density polyethylene resin
Performance: Non-toxic, odorless, acid corrosion, fluid resistance is small, easy to install.
Agriculture Labyrinth Type PE DRIP TAPE for Farm Irrigation
The Application of Irrigation Tape distance 30cm Good Quality:
The layflat hose has a wealth of residential and commercial applications, and it is usually used for general water transfer purposes as well as for submain.Generally layflat hoses are used in the industry of agriculture,in pipe lining and rehabilitation,in removing waste water,in mine dewatering ,in the chemical industry and even for household chores
The decription of Agriculture Labyrinth Type PE DRIP TAPE for Farm Irrigation
Two layers of PVC bonded together encapsulating high tensile polyester fibers.
Thick wall dimensions and strong yarn structure help products to hold connections and resist bursting.
It assumes the conventional round appearance when pressure is being passed through it and then returns to its flat shape after use.It does not need drying and can be rolled immediately after use.
Features of Agriculture Labyrinth Type PE DRIP TAPE for Farm Irrigation:
1.Great durability mainly given by the reinforcement and high-density PVC material.
2.The layflat hoses can have up to 12 inches diameter based on their applications.
3.Extra thickness are added in order to prevent bursting due to pressure in heavy industry.
4.Can be easily rolled up,stored and reused,as it has a very durable construction.
5.The hoses come with a variety of fittings and accessories ensures the water transfer process free of leaking.
6.Temperature range:-5°C~65°C(23~149F)
FAQ Agriculture Labyrinth Type PE DRIP TAPE for Farm Irrigation
1.Q:Are you manufactory or trade company?
A:We are the Manufactory specialized in drip irrigation more than 20 years; Our factory have passed IS09000.
2.Q:How can I get the samples?
A:If you need some samples to test, we can make as per your request .You should pay for the transportation freight of samples and our samples cost, while the samples cost can be refundable after you place the order if the amount meets our requirement.
3.Q:How much the transportation freight of samples?
A:The freight depends on the weight and packing size and your area.
4.Q:How long can I expect to get the sample?
A:The samples will be ready for delivery within one week. The samples will be sent via express and arrive in 7-10 days.
5.Q:Can we have our Logo or company name to be printed on your products or package?
A:Sure.Your Logo can be put on your products by Hot Stamping,Printing,Embossing,UV Coating,Silk-screen Printing or Sticker
- Q:I always chew on plastic! Is that bad for my teeth? What if I accidentally swallow a piece? Would that be bad?
- The chemicals in human saliva are remarkably corrosive, and it's possible that by chewing on plastic, you can ingest toxic substances that your saliva has released from that plastic. Chewing it won't necessarily harm your teeth, and a swallowed bit will pass on through your digestive tract in a day or so. But don't chew the stuff - you really don't want to poison yourself, do you?
- Q:I was wondering what polymerization reactions BPA is involved in to make plastics.Could you explain the specific steps of each reaction to make the plastic?Thanks!
- The reaction of BPA to make polycarbonate is given here:
- Q:What are the plastic mold steel material?
- T8A, Tl0A: Shape simple small core and cavity. Crl2、Cr4W、Move、Crewmen、9Mn2V、Cr2Mn2SiWMo... Complex shape and required heat treatment deformation of small cavity, core, or insert and reinforced plastic mould. 20CrMnMo、20CrMnTi、5CrMnMo、40CrMnMo: Need carburizing, quenching, high wear-resisting, high strength, high toughness of the core and cavity. 3CrMnMo、38CrMoAl: Complex shape, the corrosion resistant of high precision cavity, core. P20: Small and medium-sized thermoplastic injection mold. 5 nice、Small: Large and medium-sized thermoplastic injection mold. SM2PMS: Long life, high precision of small and medium-sized mold. 06NiCrMoVTiAl 06Ni7Ti2Cr: High dimensional precision, small mold for mirror polishing. PMS、8CrMn: Large injection mold. 25CrNi3MoAl: Apply cavity corrosion pattern. 4Cr5MoSiVS: The large mold shape is not too complicated. PCR: PVC and Mixed with flame retardant injection mold. 65Nb、LD2、CG2、CI2Al: Small, precision, complex cavity and insert.
- Q:Does anyone know what the chemical name and compound formula for Plastic is?
- Chemical Formula For Plastic
- Q:I have the lg env3 and I'm looking for a cover. I'm wondering whether i should get a silicon or a snap-on plastic cover.? Which protects the phone better if it gets dropped? Thanks!
- plastic will protect it better if dropped because he plastic will crack before the phone, silicon is just soft and a drop could possibly still crack it because the silicone won't take the damage. However, if you don't want to add a lot of size to your phone the silicone is best. So, if you don't care about size and only want protection, get plastic. If you want a little bit of protection and not much of a size difference, get silicone
- Q:How do you establish ground cover in an existing garden?
- To establish ground cover in an existing garden, there are a few steps you can follow. First, clear the area of any weeds or unwanted vegetation. Next, prepare the soil by loosening it with a garden fork or tiller and removing any large rocks or debris. Then, choose a suitable ground cover plant that thrives in your climate and meets your aesthetic preferences. Dig holes or prepare patches for planting the ground cover, ensuring they are spaced appropriately. Place the ground cover plants into the prepared areas, making sure to follow the recommended planting depth and spacing guidelines. Finally, water the newly planted ground cover thoroughly and regularly, especially during the initial establishment period.
- Q:where to buy plastic crown molding
- It is a great query. Why would anyone use the non-timber crown molding? I individually have certainly not used platic, however I did use an engineered MDF kind product. I selected it over wooden for an extraordinarily certain cause, my partitions weren't perfectly square. With the Medium Density Fiberboard or MDF I obtained the wiggle room critical to make a particularly just right match. MDF is slighly much less rigid than its hardwood counterpart. For my application the change on this area made the change for the undertaking on account that I was going to anguish the wood a semi-gloss white both approach. I strongly advocate the malleability of the MDF over the hardwood. Plastic would be a suitable choice on account that after you have it in situation, no person is ever going to contact it. Also, I selected a molding that did not have quite a lot of complex cuts of dental work. If I had chosen a extra historical molding that had these forms of design effects I most likely would have regarded a plastic over the wooden product without problems in view that of rate. It is less expensive to create as compared to the wooden merchandise, and as such, you are able to scan more with it. But as soon as it's on the wall, the informal person shouldn't be ready to tell the change between any of those products if it has been hooked up adequately. Essentially, install, putty, paint. As soon as it has been painted, they should look well-nigh the identical.
- Q:i know that you use foam to create a model and when metal is poured on top of it it evaporates on contact but what about if you tried it with regular common plastic models and put a runner and riser hole for the plastic to vent similar to sand casting
- Any organic material can be used to make a casting mold including twigs, other wood and plastics, as long as it is burned out before the metal solidifies. The problem with using anything other than foam is that foam is mostly air that is surrounded by a small amount of plastic. When the plastic is hit by the hot metal, it burns/gases off without cooling the metal enough to block its flow. For any solid organic material, the investment must be fired/baked to a high enough temperature to turn the material to ash which can be blown into the vents by the flowing metal.
- Q:How often should I water ground cover plants?
- The watering frequency for ground cover plants depends on various factors such as the type of plant, weather conditions, soil type, and drainage. Generally, ground cover plants should be watered deeply but infrequently. It is recommended to water them thoroughly once or twice a week, allowing the soil to dry out slightly between waterings. However, it is essential to monitor the moisture levels in the soil and adjust the watering schedule accordingly to ensure optimal growth and health of the plants.
- Q:Can they be recycled? What kind of plastic are they made from?
- I would recommend you contact PEZ to be certain. However, if I had to guess, I would say they are primarily plastic #5, PP, and more likely than not, there are several types of plastic in the dispenser. Additionally, because of the metal springs inside, the PEZ dispenser would be discarded from a recycling program because of the difficulties associated with separating the different materials. Generally speaking, outside of electronics and aseptic cartons (the paper cartons some milks and orange juice come in), there isn't a big market for mixed-material recyclables. The small amount of plastic and metal that could be possibly be recovered from the dispenser are not worth the time it would take to disassemble the piece. It is possible the company offers some sort of recycling or take-back program, though I couldn't find anything about it on their website. Hope this helps.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Agriculture Labyrinth Type PE DRIP TAPE for Farm Irrigation
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 199 m²
- Supply Capability:
- 1999999 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
