Articulated boom aerial working platform working height 16m
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 100台 /month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The max. working height of this aerial working platform is 16m.
It can be applied in various conditions for aerial working, such as urban road, suburban road, highway, airport, bridges and culverts and so on.
We start this business from 1998, have many years of design and production experience.For the upper structure, we use HQ600 high strength steel, for some key components, we imported from Europe to assure product high quality.
Our product is durable and easy operation and maintenance, we can supply training for customer in our factory for free. pls find below detail parameters:
Bulletin No. | KFM5065JGK | |
Type | GKZ-16Q | |
External dimensions（mm） | 7300×2000×2970 | |
Structure type | Three-section articulated boom | |
Working Cage | Internal size（mm） | 1100×600×1100 |
Rated loading（kg） | 200 | |
Max. Working height（mm） | 14000 | |
Max. Height from ground（mm） | 14300 | |
Max. Working radius（mm） | 7700 | |
Working radius when doing the highest height（mm） | 3220 | |
Working Boom | Max. Raising angle of lower boom（º） | 70 |
Max. Raising angle of upper boom（º） | 70 | |
Max. Raising angle of jib（º） | 90 | |
Boom rack ration angle（º） | 360 | |
Outrigger | Vertical span（mm） | 3200 |
Horizontal span（mm） | 3600 | |
Traveling of vertical outrigger（mm） | 450 | |
Adjustment | Single adjustable | |
Lifting | Rated lifting weight（kg） | 995 |
Rated lifting height（mm） | 8630 | |
Chassis Introduction
Traveling Performance Parameters | Chassis model | ISUZU NKR77LLWCJAY |
Persons | 2+3 | |
Axle base (mm) | 3815 | |
Wheel base (front/rear)（mm） | 1504/1425 | |
Driving mode | 4×2 | |
Front suspension（mm） | 1015 | |
Rear suspension（mm） | 2040 | |
Approaching angle（º） | 24 | |
Departure angle（º） | 11 | |
Max. Grade ability（%） | 30 | |
Min. Turning diameter（mm） | 18000 | |
Min. Ground clearance（mm） | 190 | |
Engine | Engine model | 4KH1-TC |
Rated power（kw/r/min） | 96/3400 | |
Torque（N、m/r/min） | 280/1700 | |
Max. Speed（km/h） | 90 | |
Gas consumption per one hundred miles(diesel oil) （L） | 10.8 | |
Specification of the tire | 7.00-16 | |
The whole weight（kg） | 5875 | |
Max. Weight with whole loading（kg） | 6200 | |
- Q:What is the principle and purpose of the rotary joint of the truck crane center?
- There is no hydraulic principle, is a simple principle of mechanical work!
- Q:Does the truck crane commander need a document?
- Yes, commanders and operators need to be certified.
- Q:What are the main categories of mobile cranes?
- Truck Crane Truck Crane is a modified part of the car chassis or used to install the crane for the operation of the dedicated part of the axle most of the use of flexible suspension.
- Q:What are the safety procedures for truck cranes?
- The driver must work closely with the commander (lifting engineer), in strict accordance with the signal (flag or gesture) issued by the commander; operation must be marked (bell or speaker) signal; if the command signal is unclear or wrong, the right
- Q:How many car cranes are there?
- Axis, the number of wheels is less, generally 8-axis 18 rounds, so the car crane is usually smaller tonnage, usually within 100 tons.
- Q:What is the role of the truck crane legs?
- The leg is the key to the crane. No matter what action you do, you have to play the leg first. This will make your car roll or puncture
- Q:What is the failure of the crane crane and the slow speed of the crane?
- If this is no problem is to open the crane between the steel, which loose wire rope, it can be slightly tighten it.
- Q:What is the difference between a truck crane and a car crane?
- The same thing is called different.In front of that is not the same as that obviously is called the car crane.
- Q:What is the relationship between the winch and the reel and the reel shaft?
- Reducer with bolts fixed together, and finally the reducer into the reel, and bolted.The order of installation Well, you should understand.
- Q:What are the four kinds of truck cranes?
- The four cylinders of a truck crane generally refer to the telescopic cylinder of the boom (adjusting the length of the boom)
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Articulated boom aerial working platform working height 16m
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 100台 /month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
