CSM Glass Fiber Chopped Strand Mat/Fiberglass Mat/Emulsion or Powder Mat
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
Fiberglass Chopped Strand Mat is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder.
It is easy to handle and has excellent moulding performance.
Also, it has rapid resin penetration together with a fast strand wet out time.
The mat also brings a highly translucent finished laminates.
Also,the fine strand input makes the fiber prominence at the finished laminates surface extremely low.
Features
1.Excellent weight uniformity
2.Fast wet out
3.Easy air release
4.Excellent transparency of finished products
5.Excellent laminate
6.Low resin consumption
Application
1.Translucent roof panel
2.chemical storage tanks
3.FRP pipes
4.Boat hulls
5.Decks
6.Truck body panel
7.Cooling towers
8.Corrosion resistand
Specifications:
Item | Over Density | Moisture Content | Chop Density | Polyester Yarn | Width |
(g/m2) | (%) | (g/m2) | (g/m2) | (mm) | |
EMK300 | 309.5 | ≤0.15 | 300 | 9.5 | 50-3300 |
EMK380 | 399 | 380 | 19 | ||
EMK450 | 459.5 | 450 | 9.5 | ||
EMK450 | 469 | 450 | 19 | ||
EMC0020 | 620.9 | 601.9 | 19 | ||
EMC0030 | 909.5 | 900 | 9.5 |
Special products are available according to customer’s requirement.
Product Packaging:
Each Surface Tissue is wound onto a paper tube which has an inside diameter of 76mm and the mat roll has a diameter of 330mm. The mat roll is wrapped up with plastic film,and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a cantainer directly or on pallets.
Quantity
20'GP Container:About 10000kgs
40'HP Container:Aboout 23100kgs
Product Storage:
Unless otherwise specified, Chopped Strand Mat should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃~35℃ and 50%~75% respectively.
Company Information
CNBM (China National Building Material) Group is the largest comprehensive building materials group in China that in integrate scientific research, manufacturing and logistics into one entity. The largest building materials and equipment specialists in China. Upon State Council approval, today CNBM owned more than 300 subordinate manufacturing factories and servicing companies. There are 6 fully owned public listed companies and 11 partially owned with substantial shares public listed companies. In many of these fields, CNBM is playing the leading role in the building industry in the country.
Our Service:
1.Any inquiry will be replied within 24 hours.
2.Professional manufacturer.
1) Print logo in the products;
2) The size and specification can be produce and design according to your demand.
3.High quality,fashion designs,reasonable and competitive price,fast lead time.
4.After-sale service
1) All products will have been strictly quality check in house before packing.
2) All products will be well packed before shipping.
3) All our products have 10 years rot resistance.
5.Faster delivery:sample order in stock,and 15-20 days for bulk production.
6.Payment:you can pay for the order via:T/T,Western Union,MoneyGram,L/C etc.
FAQ:
which kind of glass fiber sample and materials can you provide?
We can provide the glass fiber and glass fiber down stream products samples of E glass, C glass, ECR glass, High alkali glass. The products includes single end roving, assembled roving for different applications( Piping, SMC, panel, winding mill plate) , chop strand for BMC, engineering plastic (PA, PPA, PPT, POM, etc), chop strand mat (from 100gsm-900gsm) for automobile and water tank, etc, woven roving (270gsm-800gsm), surface tissue (25-50gsm), multi-axial fabric of different unit weight.
- Q:Can fiberglass chopped strand be used in acoustic insulation applications?
- Certainly! Acoustic insulation applications can indeed utilize fiberglass chopped strand. Renowned for its superb sound absorption qualities, fiberglass proves itself as the perfect substance for diminishing noise and enhancing acoustics across diverse contexts. When in the form of chopped strands, fiberglass effortlessly combines with other substances, like binders or resins, to fabricate insulation products that efficiently soak up and muffle sound waves. These products find frequent employment in structures, automobile applications, and other settings that prioritize noise reduction. All in all, fiberglass chopped strand emerges as a versatile and highly efficient material for acoustic insulation purposes.
- Q:What is basalt fibre used for?
- According to its characteristics, it is a very wide range of industrial raw materials. The price of basalt fiber is quite high, which is different from the basalt used for road repairing.
- Q:Can fiberglass chopped strand be used for reinforcing ceramic matrix composites?
- No, fiberglass chopped strand cannot be used for reinforcing ceramic matrix composites. Ceramic matrix composites usually require high-temperature resistant materials for reinforcement, as they are designed to withstand extreme heat and provide excellent mechanical properties at elevated temperatures. Fiberglass, on the other hand, may not have the necessary thermal stability to withstand the high temperatures required for ceramic matrix composites. Additionally, the thermal expansion coefficients of fiberglass and ceramics are usually significantly different, which can lead to poor compatibility and potential failure of the composite. Therefore, alternative high-temperature resistant fibers, such as carbon fibers or silicon carbide fibers, are typically used for reinforcing ceramic matrix composites.
- Q:Characteristics of carbon fiber
- At present, the world's carbon fiber production reached 40 thousand tons per year, the situation will not change a lot, In the past 20 years, 3K, Lombardy will exceed 5000 tons in 2010. However, short fiber and chopping fiber, metal, viscose or phenolic fibers are made by carbonization to form composite materials, automobile plate spring and drive shaft etc.. .
- Q:Can fiberglass chopped strand be used in electrical insulation sheets?
- Yes, fiberglass chopped strand can be used in electrical insulation sheets. It offers excellent electrical insulation properties due to its high dielectric strength and low electrical conductivity. Additionally, its mechanical strength and temperature resistance make it suitable for various electrical applications.
- Q:Can fiberglass chopped strand be used in the manufacturing of electrical enclosures?
- Yes, fiberglass chopped strand can be used in the manufacturing of electrical enclosures. It provides excellent insulation properties and high strength, making it suitable for protecting electrical components. Additionally, fiberglass is corrosion-resistant and can withstand various environmental factors, making it a viable material for electrical enclosure manufacturing.
- Q:Is fiberglass chopped strand resistant to corrosion?
- Negative, fiberglass chopped strand does not possess inherent resistance to corrosion. Fiberglass, being a composite material comprising glass fibers and a resin matrix, does not undergo corrosion as metals do. Nevertheless, the resin matrix employed in fiberglass can be vulnerable to corrosion caused by specific chemicals or environmental circumstances. Consequently, in situations where the prevention of corrosion is a concern, supplementary steps like applying corrosion-resistant coatings or opting for an alternative material might be required.
- Q:Is fiberglass chopped strand suitable for water treatment applications?
- No, fiberglass chopped strand is not suitable for water treatment applications. Fiberglass chopped strand is primarily used in the production of composites and is not designed to withstand the harsh conditions and chemicals typically found in water treatment processes. Water treatment applications require materials that are resistant to corrosion, chemicals, and high temperatures, which fiberglass chopped strand is not able to provide. Instead, materials such as stainless steel, plastic, or specialized corrosion-resistant alloys are commonly used in water treatment applications to ensure durability and long-term performance.
- Q:Is fiberglass chopped strand compatible with different curing methods?
- Yes, fiberglass chopped strand is compatible with different curing methods. Fiberglass chopped strand is commonly used as a reinforcement material in various industries such as automotive, construction, and aerospace. It can be used in conjunction with different curing methods, including thermosetting and thermoplastic processes. In thermosetting processes, such as resin transfer molding (RTM) or vacuum infusion, the fiberglass chopped strand is typically impregnated with a thermosetting resin, which is then cured at elevated temperatures. The resin undergoes a chemical reaction, resulting in a hardened and durable composite material. Fiberglass chopped strand is compatible with these processes as it provides strength and reinforcement to the cured composite. In thermoplastic processes, such as injection molding or compression molding, the fiberglass chopped strand is mixed with a molten thermoplastic resin, which solidifies upon cooling. The chopped strand reinforcement enhances the mechanical properties of the thermoplastic material, making it stronger and more resistant to deformation. Fiberglass chopped strand is compatible with these processes as it can be easily incorporated into the molten resin and distributed evenly throughout the molded part. Overall, fiberglass chopped strand is a versatile material that can be used with different curing methods, providing enhanced strength and durability to the final product. Its compatibility with various processes makes it a preferred choice in industries where high-performance composites are required.
- Q:What is the thermal shock resistance of fiberglass chopped strand?
- The thermal shock resistance of fiberglass chopped strand is generally high, as it can withstand rapid changes in temperature without cracking or breaking.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
CSM Glass Fiber Chopped Strand Mat/Fiberglass Mat/Emulsion or Powder Mat
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 kg
- Supply Capability:
- 10000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
