flat face thread button bit R32 T38 T45 T51 Tungsten Carbide
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
We are specialized in rock drilling tools，such as taper button bit, thread button bit, Integral drill rod, DTH bit, DTH hammer, Air leg rock drill, Excavator Mounted rock driling and splitter, expansive mortar.
Product:
Thread Button Bits: High quality and several thread with various carbide tips like YK05 are available. All products can be developed upon customers' request. Premium designs and steel and premium tungsten carbide insert grade T6 supplied by Boart Long year, Offers industry-leading strength and penetration rates for more productivity, Excellent straightness and hole clean quality, Get max. drilling performance for rock drills with long life to save up fuel cost rate.
Description of button bit:
Our company supply all kind of button bits with Rope thread
R32-43MM, R32-45MM, R32-51, R32-64, R32-76;
T38-64, T38-76MM, T38-89, T38-102MM;
T45-76MM, T45-89MM, T45-102MM;
T51-89MM, T51-102MM, T51-127MM etc.
all face design, flat face, drop-center face, normal body and retrac body.more
Specification of button bit:
Thread | Diameter range | Skirt Design | Face Design | Button Design |
R22 | 35 – 45mm | Normal | Flat Face | Hemispherical |
R25 | 33 – 57mm | Normal | Flat Face | Hemispherical |
R28 | 36 – 51mm | Normal | Flat Face | Hemispherical |
R32 | 41 – 89mm | Normal | Flat Face | Hemispherical |
R35 | 48 – 51mm | Normal | Flat Face | Hemispherical |
R38 | 64 – 102mm | Normal | Flat Face | Hemispherical |
T38 | 57 – 102mm | Normal | Flat Face | Hemispherical |
T45 | 70 – 127mm | Normal | Flat Face | Hemispherical |
T51 | 76 – 140mm | Normal | Flat Face | Hemispherical |
T60 | 89 – 140mm | Normal | Flat Face | Hemispherical |
ST58 | 89 – 140mm | Normal | Flat Face | Hemispherical |
GT60 | 93 – 140mm | Normal | Flat Face | Hemispherical |
ST68 | 102 – 152mm | Normal | Flat Face | Hemispherical |
Company Profile:
CNBM is the largest state-owned enterprise in China building material & equipment industry. Up until October of 2011, our total assets exceeded RMB 190 billion, with 130,000 employees and over 300 subordinate companies. In the year 2012, we are ranked as No. 365 in World Top 500 Enterprises by Fortune, and No. 2 in global building materials industry, second only to Saint-Gobain.
FAQ:
1. Q: Can I get some samples?
A: We are honored to offer you samples for quality check.
2. Q: Do you have the products in stock?
A : Yes , We have sample for several models now could supply to you.
3. Q: What’s the delivery time?
A: It usually takes about 25 days to produce an order. But the exact delivery time might be different for different orders or at different time.
4. Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
5. Q: How does your factory do regarding quality control?
A: Quality is priority. Rock drilling tools workers always attach great importance to quality control from the every beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.
6. Q: Will you deliver the right goods as ordered? How can I trust you?
A: Yes, we will. Our company is world top 500, that is the biggest supplier and manufacture in China, having a good reputation around the world.
7. Q: What's the payment you accept ?
A: As usual our payment is T/T, other payment can consider.
As the largest manufacturer and exporter of building materials in China, we avail ourselves of this opportunity to approach you for mutual-beneficial cooperation. If you want to know more, pls contact me freely.
- Q:How about the speed of the drill bit and the feed of the cutter in the machining center?
- 1, if I first drill with D13 bit (S600, F80, Q5), and the rest of all milling cutter hole2, casting and steel parts almost turn, the speed can be faster. After 28 of the hole points, use 28 bit S300, F50, Q3. directly3, 35r6 direct spiral down, layer below 0.5-0.8, S1500, F2000-3000
- Q:What bit is better for drilling 304 stainless steel?
- Drilling 304 stainless steel with an ordinary high-speed steel drill can be done, but note the requirementThe sharpening angle of the drill must not be less than 110 degreesThe angle of the drill should be symmetricalDon't be too sharp edge cutting is not easy.
- Q:How do you drill a drill?
- 2, drill clockwise in the same direction, drilling tail down about 10 degrees angle, sharpening;3, drill once rotated 30 degrees angle or slightly larger, pay attention not to sharpen all other cutting edge, grinding two or three times;The 4 supporting point does not change, and the drill rotates 180 degrees, with the same method sharpening all other cutting edges;5, after grinding, the drill will be vertical (to make it natural droop), and hold it in hand, check whether the grinding bit is symmetrical with its center line;In case of asymmetric grinding, the angle between the cross blade and the cutting edge should be 50 degrees --55 degrees;
- Q:What chisel drills are used for building water utilities?
- Professional water electrician's approach is to draw a good line, and then cut the thread by wire cutting, and finally hit the groove. This way the groove is standard and small to the wall.
- Q:How to remove the electric clock bit
- Press the outer sheath of the bit first, then pull out the bit.
- Q:How to polish drill bit
- Grinding twist drill is the front edge of grinding, we do mechanical processing, the new twist drill must be polished, and then used. A mill can also grind, but it must be worn by those who can grind it. Percussive drilling and percussion drills are necessary for drilling. Twist drills for metal.
- Q:What drill does 42CrMo use to drill better?
- Drilled outlet, rotary car hole boring other shapes
- Q:What is the difference between steel and high-speed steel?
- High speed steel: all metal cutting is done with high carbon steel at once. This grade of steel shows high hardness, but tends to soften very quickly when heated. The addition of tungsten and chromium to the cutting steel makes it more resistant to heat when it is heated, thereby enabling a significant increase in cutting speed. These steels are called high speed steels. Other types of tool steels are less important for cutting purposes than this class. HRC66-69
- Q:What causes the drill bit to break at the end of the hole?
- The cutting edge angle is not proper, and the iron chip blockage causes the resistance to increase.1) and the principle of uniform, when the edge angle is not appropriate, the drill operation must not only overcome the cutting resistance, but also overcome iron friction and pore wall blocking resistance, resistance and greater than two fold twist drill strength, also can cause the drill bit break.
- Q:The maximum diameter of the hammer is fixed up? Can I open the hole? How does an electric drill screw in? How big is the drill bit?
- If the opening is often marked with the vertical line, then along a circle hole, knocking out the middle can.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
flat face thread button bit R32 T38 T45 T51 Tungsten Carbide
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
