knife seat,F-KB039 Rubber wood knife seat,your best choice
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
product name:rubber wood knife seat
material:rubber wood
MEAS:22*25.6*6.5cm
Specifications:
Has the quite distinct shape of the mountain wood grain, and the contact surface is a good sense
Excellent toughness, process into various curved according to the needs , full of beauty
Solid texture,manufactured goods with firm structure,prolonged service life
The texture of rubber wood is fine and closely woven,pore full of lots ot padding so it's hard to absorb water and corrode.
Description:
1、The knife seat use material of high quality natural rubber wood and take professional advanced machine equipment and manual binding.
2、The knife seat was refined by material, assembly, polishing, painting and other procedures.
3、The knife holder has the advantages of real materials, excellent workmanship, mouldproof and moth proofing, anti bacteria, wear-resisting etc.
4、Hoteam commerce co.,LTD,is a manufactory specialized in all kinds of wood knife handles,wood seats,chopping boards and other woodworks.
5、Because the knife tool contact with tool wet food for long time, is very easy to breed bacteria, you should ensure that dry and clean and put it in the open air
Primary Competitive Advantages:
Brand-name Parts Country of Origin
Distributorships Offered Experienced Staff
Form A Green Product
Guarantee/Warranty International Approvals
Packaging Price
Product Features Product Performance
Prompt Delivery
Main Export Markets:
Eastern Europe North America
Mid East/Africa Central/South America
Asia Western Europe
Australasia
- Q:What is a tray roll bag
- Industrial heat shrinkable tray with a roll bag weight is about 1 kg. A roll of 30 or soAt present, the thickness of the large 100um bag is mainly imported
- Q:What is the difference between numerical control tool holder and power tool holder
- CNC turret is a large class, which includes the common tool holder and power tool, that is, the power tool holder is one of the numerical control.The common tool holder can only be installed with a fixed knife seat for processing, the power tool holder can be installed with a fixed knife seat, and a power knife holder can be installed.CNC turret is an auxiliary device for CNC lathes are the most common, it can make the CNC lathe in clamping a workpiece in many or even all of the machining process, to shorten the processing auxiliary time, errors caused by multiple workpiece reduce machining process, thereby improving the machining efficiency and high precision machine tool.At present, the domestic CNC turret to electric, divided into two types of vertical and horizontal. Vertical tool holder has four, six stations in the form of two, mainly for simple CNC lathe; horizontal tool holder has a position of eight, ten, twelve, can be positive and opposite direction rotation, the nearest election knife for the full function CNC lathe. In addition, the horizontal tool holder is provided with a hydraulic tool holder and a servo driving tool holder.
- Q:The difference between the center and the rest
- The 1 center frame is fixed on the bed rail, and has three independently movable supporting claws, and can be fixed by fastening screws. When in use, the workpiece is arranged on the front and rear top, in the first part of a workpiece support finishing smooth surface, then the proper position of center frame fastened to the guide rail, the final adjustment of three supporting claws, make contact with the workpiece supporting surface, and adjust to the proper degree of tightness.
- Q:Numerical control lathe tool holder does not match the system cutter number
- Is not the cover of the knife on the wrong side of the knife on the lid off
- Q:To the signal line where the pull resistance, pull resistance to do with the trouble to say clearly?
- In a word: your signal circuit IC no internal resistance, protection. Pull the signal is determined by a high resistance resistor at the high level, while the resistance from the current limit, pull the same. Pull on the device is the injection current, the output current is down; just pull the weak and strong resistance, no strict distinction between what; for non (collector or drain) open circuit output circuit (such as gates) current and voltage capacity improvement is limited, the pull-up resistor is the main function of open circuit output type of circuit output current for the collector channel. All the pull-down resistor pull-up resistor is used in logic circuit, the circuit current is very small, the logic circuit of MOS tube bias current is microampere, even pA uA, the current level to provide a desired level, such as the current level without any output, because there is a pullup resistor so after a level is actually connected to a high level. Power amplifier circuit with no pull down resistor. Pull the signal is determined by a high resistance resistor at the high level, while the resistance from the current limit, pull the same. The pull-up resistor is the main function of the open circuit output current output channel for the collector; main function is connected with the pull-down resistor resistor together to line in the closed circuit driver (node) to a fixed level. Pull on the device is the injection current, the output current is down to note is that the pull-up resistance caused by too large delay output level, including the choice of the principle of resistance: 1, from the current irrigation ability to save the power consumption and chip considerations should be large enough; resistance...
- Q:Numerical control lathe tool holder is a tool to change what is the fault
- Change the tool to change the length of the first, if it is not for the arrival, but look at the system input signal. Step by step the first look at the investigation!
- Q:After the work of the machine tool, the knife is not changed, the time is good and bad, the circuit is not a problem, mechanical rotation is normal. What are the specific reasons
- Processing part of the program in the preparation of T code, the need to change the target knife number, the principle is to achieve this. The current knife number in the system inside, find the target knife number, according to the shortcut to the principle of selection, to determine the positive and negative. And calculate the number of knives that need to be turned over to the counter. In normal operation, the knife counting switch is used to subtract. The difference between the number of targets to subtraction, a reduction of 0, the completion of the signal, the library to stop running. The reason for this failure may be caused by the loose count switch and the error count. Control PLC counter in the middle, to see whether one correspondence can determine where the problem!
- Q:How can we remove the NC turret
- First remove the inside, then the following,Two screws inside, then the eye, should use a punch, turn down
- Q:How to save the supermarket roll bag?
- In the place of the roll bag placed in the food and goods, dry and wet varieties, such as the separation of each line of the front of the sale of things, do not half-way and tail placed, mainly with the sale of goods placed matching
- Q:Who has any good method or fixture drawings and pictures for younger brother to learn ah, do not be grateful, want to do, but I have not seen this thing, the idea does not come out
- In order to install the taper shank drill, you need to buy or process a tooling, the taper of the inner hole 1:16, the size of the outer circle is determined by the hole of the boring tool holder on your lathe.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
knife seat,F-KB039 Rubber wood knife seat,your best choice
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords