LED PAR LAMP PAR 30
- Loading Port:
- Shanghai
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 500000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED PAR LAMP PAR 30
General Introduction of PAR LAMP
White Surface E27 Base Plastic Lamp Par38 Led Bulb
Specifications: | |
Bulb | PAR30 |
LED Counts | SMD LEDs |
Lamp type | LED Warm White/Neutral White/Daylight |
Light Output | 1200 Lumen |
Beam Angle | 25° |
Body Materials | Plastic with Aluminum inside |
Voltage | AC90-250V |
Wattage | 15W |
CRI | 80 |
Life Span | 30000hrs |
Primary Application | Indoor Floodlight/reflect lamp |
DIMENSIONS | |
Maximum Overall Length (MOL) |
|
Bulb Diameter (DIA) | |
Special Features not for use on dimmers |
Feature of PAR LAMP
-PC lens with high light transmittance
-Aluminum heat sink with special technology on surface for cooling
-No screws design and un-disassembled
-Long lifetime 25,000 Hrs,2-years warranty
Switch off the electricity replacing the lamp.
Keep a way from direct sunshine and high temperature.
Be good at heat-releasing
Highly shock and vibration resistant
FEATURES OF PAR LAMP
FAQ:
Why choose LIGHT fom CNBM?
Q: What is the Operating temperature?
A: -20 to +40 degree Celsius
Q.What is the Light efficiency ?
A: Upto 100LM/W
Q:What is the starting time of LED Light ?
A: Instant
Q:What is the Power Factor of Led Bulb ?
A:0.5 or 0.9
Q:What is the CRI ?
A: we offer CRI 65 (OPTIONAL 70RA, 80RA )
Q:What is the beam Angle?
A:270° beam angle, no dark space
Q:Any Mercury or Radiation or UV ?
A: NO
Q: Are your product IEC satisfied ?
A: YES
Q: How Much Energy It Can Save ?
A:Can save power over 80%
Q: Your Product 100% Real Wattage ?
A: Yes, 100% enough
Q:Which Kind of mount installation you can offer ?
A: Recessed type and Surfaced mounted Type
Q: How Long of Warranty
A: Minimum 2-3 years, and upto 5 years
- Q:18 w led lamp flashing how to return a responsibility
- A common cause of LED lights flashing and the solution: Energy-saving lamps, LED lights will shine after power off, check the switch control is zero. If the correct wiring may refer to the following methods: The human eye can generally perceived frequency of 70 Hz light flashing, higher than the frequency does not perceive. So in LED lighting applications, if the pulse signal frequency is lower than 70 Hz low frequency component, the human eye will feel the shine. In the specific application, of course, there are many factors may lead to LED lights flashing.
- Q:Cob lamp and led lamp that electricity consumption big?
- The LED lamp advantages: 1. LED lamp use in low voltage direct current (dc) drive: has the advantages of small load, interference of low use environmental requirements. 2. The LED lamp can well control light spectrum, which can effectively used in the museum and gallery in local or accent lighting. 3. The luminous directivity of LED to shoot the light is very strong: brightness attenuation is much lower than traditional light, LED lamp price. 4. LED lamp very fast response time: in microsecond, as long as the switch is opened, will soon be bright, there will be no delay and flicker phenomenon. 5. The LED light that shoots the light energy concentration is very high: focused on smaller wavelength window, high purity. 6. Life is very long, generally between 50000-100000 hours, because the LED is a semiconductor device, even frequent switch, also won't affect the service life. 7. Good environmental protection, LED to shoot the light in the process of production don't add "mercury", also do not need air, do not need glass shell, good impact resistance, good shock resistance, invulnerability to breakage and facilitate transportation, very green, known as "green energy", the LED lamp price. 8. Energy saving, LED to shoot the light spectrum of almost all concentrated in the visible light spectrum, the luminous efficiency of up to 80 ~ 90%. 4/5 people think commonly, energy-saving lamps save energy is a great invention, but the LED lamp energy-saving 1/2 than energy-saving lamps, this is a solid light source is more great reform.
- Q:Led bulb light beam width led ball steep light Angle is usually?
- 25 and 30 degrees LED lamp, LED ball steep Angle, LED buried lamp monochromatic is 30 degrees, become angry with 45 to 60 degrees, and LED street lamp 120 degrees, LED ceiling lamp 25 to 60 degrees, 30 degrees LED pervious to light, LED floodlight, 90-90 degrees, actually this is not very clear to me
- Q:On the ceiling lamp bulb is broken can change LED light bulb?
- Yes, there are similar LED lamp. If you compare the outlet is in line with the line.
- Q:Friends have told me that the Hong Kong star can lighting production of LED lamp, LED bulb light. LED daylight tube is very save electricity, I find for a long time to find, now share with you what? Who can tell me what is he power-saving principle?
- Don't watch brand! What to see whether the use of chip, chip technology in abroad several factory hands, such as the United States kerui, Taiwan wafer and on electricity, Germany's lang. LED light source is a big trend, no stroboscopic high advantage is energy-saving life! Ordinary incandescent lamp with 80% energy into heat energy, LED light-emitting diode technology with 90% of the electric energy into light energy, energy saving, of course!
- Q:1. I bought the LED tube light, there is some light is driven with constant current, while the input voltage is 220 v, but tend to be low voltage dc output voltage, there are some inserts the 220 v can directly, didn't see any of the constant current drive, so is built into the still say there are two kinds of LED tube light, is a kind of the working voltage of the dc low voltage, a kind of ac 220 v. 2. About the LED tube light, dimmer, I already according to one of the LED constant current drive found the corresponding LED light, that if I was the LED directly to the adjustable light can directly replace the LED constant current drive.
- Do you want to light is adjustable brightness or light color? If it is a variable degree of directly replace driver IC is ok, if is the color temperature of the lamp bead can not suitable for you. 3. Your driver output voltage and current, the series multiple lamp after share current, light can't take much more
- Q:Why turn off the switch and dim the led lamp
- Mainly because of internal power filtering capacitance. When the power is shut down, capacitance on the surplus electricity will let LED continue to dim light for a while. Capacitance discharge, it is for this reason...
- Q:Does the background wall light 3 watt led enough
- 3 watts also enough, almost look like, if you like the brighter or metope color is suitable for higher brightness can also be adjusted wattage and see which is more suitable.
- Q:What is a good material of led tube light
- Biggest characteristic is that it can keep building decoration of the overall unity and perfect, it developed from the general light source to the popular now LED light source, each has his strong point. Canister light, shoot the light is mainly composed of light bulbs, transformer, lamp cup, buckle. Seize these quality, basic can buy their favorite products. Considerations to choose big manufacturer, big brand, will reduce your choose and buy of trouble. The lamps and lanterns "coat" is generally have a few kinds of sheet metal, die-casting aluminum, aluminum, stainless steel materials. Would be much better, of course, stainless steel, aluminum, nature price is also high. The different material, color difference, according to the household atmosphere mass-tone attune to choose from. The thickness of them decided to price volatility. Transformer, is the heart of the canister light to shoot the light. Although internally, but this is small things, has the absolute weight occupied the whole of the quality of lamps and lanterns, prices, and life.
- Q:How many the most suitable shoot the lamp to the distance from the wall
- Better in more than 20. 10 yuan of that kind of electronic ballast in the two ends of the tube. Only wire in the lamp holder. What brand of lamp act the role ofing is good, what brand of philips LED desk lamp quality, philips LED desk lamp which kind of crystalline light good
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
LED PAR LAMP PAR 30
- Loading Port:
- Shanghai
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pieces pc
- Supply Capability:
- 500000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords