LED TUBE LIGHT 10W 60CM RA>70 PF 0.9 AC85-265 INPUT VOLTAGE 800LM GLASS MATERIAL
- Loading Port:
- ShangHai
- Payment Terms:
- TT ,LC AT SIGHT
- Min Order Qty:
- 10000 pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Tube Light are receiving global recognition for their energy saving capabilities, long service life ,easy installation and the ability to reduce carbon emissions across a host of different sectors.
Specifications of LED Tube Light Voltage:AC85-265V 50/60HZ Glass Watt: 10W PF 0.9 60CM Beam Angle:300 degree
LifeSpan :30,000 Hours
2-3 years warranty
CRI :RA>70,RA>80
CCT;3000-3500K,4000-4500K,6000-6500K
Features of LED Tube Light
The LED Tube Light is widely used and are designed and manufactured to replace the traditional grille fixture ,CFL tubes , the superior SMD LED solution and purity Glass material makes the luminous efficacy high to 100LM/W, it is of excellently heat managed by conjoint structure which maintains the LED working temperature in a comfortable condition.
Excellent Heat Sink
SMD LED solutions
Superior High Quality
Eco-friendly
Energy Saving Perfect Replacement for All Lamp
Blast Free, Starter Free
Applications for LED Tube Light
Replacement CFL for traditional lamp, such as store, supermarket, commerical builing and anywhere
- Q:In several production workshops of my unit, we will replace a batch of philips T5 fluorescent fluorescent lamps with LED fluorescent lamps. However, it took more than two years to get rid of the old lamp, and it was neither green nor economical, so consult the high man.
- The fluorescent lamp doesn't seem to have a dedicated recycling system. Go to secondhand market transfer, after appearance is refurbished, again can use Led fluorescent lights are needed
- Q:What are the details of the whole process of the LED lamp?
- Hello, we are the certification testing agency, the LED light tube is simple, send samples, provide product data, test, report and certificate, thank you!
- Q:The notice of LED daylight lamp tube
- Without ultraviolet light, no LED lights will not produce ultraviolet light, so unlike traditional lamps, there are a lot of mosquitoes around the light source. The room will become cleaner and cleaner. A voltage adjustable 80v-245v traditional fluorescent lamp is lit by a high voltage released by the rectifier, which cannot be lit when the voltage is lowered. LED lamps can be lit in a range of voltages, and can also adjust the brightness
- Q:What causes the red light on both ends
- There are two reasons for this: 1. The internal gas shortage causes!
- Q:Feasibility analysis report of LED lamps
- With the advent of ultra bright white leds, applications in lighting have become possible. According to the international authorities, the 21st century will enter the era of new lighting, which is represented by leds, and is called a fourth generation new light source. At present, the lighting consumption accounts for about 20% of the whole power consumption, reduce lighting electricity is an important way to save energy, in order to achieve the goal of the industry have developed many kinds of energy-efficient lighting apparatus, and achieved certain results. However, the requirement of "green lighting" is not enough, and it is imperative to develop and apply a new source of efficiency, reliability, safety and durability. LED with its inherent superiority is attracting the world's attention. According to the forecast the U.S. department of energy (doe), around 2010, the United States will have 55% of incandescent lamp and fluorescent lamp is replaced by LED, power saving value of up to 35 billion dollars a year, may become a $50 billion industry. Japan suggested that leds would replace traditional incandescent lamps in 2006. LED development history has for decades, but the application in the field of lighting and new technology, but with the rapid development of LED technology, gradually improve the luminous efficiency, LED the market will be more widely used, especially in the rising again under the background of global energy shortage, the LED in lighting market prospect is more highly attention around the world, is considered by the industry in the next 10 years to become the most promising markets, as well as the biggest markets will be replace incandescent lamp, the greatest potential for tungsten filament lamp and fluorescent lamp.
- Q:If you want to replace it with an LED fluorescent tube, how many watts does it take?
- Commonly used household generally is 1.2 meters, is a traditional fluorescent label 36 w, combined with the actual total power dissipation of the ballast at about 40 w. If replace with LED fluorescent tube, 18 w is enough light. Such as check brightness demand is not high, some useful also 16 w to replace.
- Q:How does the T8LED light tube replace the fluorescent lamp tube
- Step 1: use a screwdriver and a pliers to disconnect the ballast from the wire. But my home is the sun lamp base of zhengtai, the quality is too good, it took 10 years. I didn't even get down to the ballast, which was stuck in a full thick iron base, so I disconnected the wire. The wire that disconnects from the ballast is sure to have two heads, just to disconnect the connection. There is a lot of direct skewers of black tape, some of which use that connector and screw the two wires together. It's the same thing. This is the connector that is used in this case. Disconnect the regenerator, remove the wire and then rewire the two broken wires together and attach the black tape (which is the insulating tape). Put the base back to the original. Install the fluorescent tube, and remember to place the head of the European logo on the base of the current. And when you put it in place, it's going to be OK.
- Q:How to remove fluorescent lamp tube
- Turn off the daylight power supply; Two, the old daylight lamp two have a gap at the end of the rotation 90 degree, the double needle pulls out from the gap, the other end pulls out. Three, the old electronic rectifier without gap, is elastic, right hand hold to the right of the plastic head, left hand hold tube push 1 centimeter or so, to the right lamp tube needle left out at this moment, at the same time left hand move down the left tube face, left hand to pull in front of the tube to the left. If it is an LED tube aluminum alloy, you want to remove the contents of the inner tube, both of which have two cross screws, and the screwdriver can be removed. The leds that do not understand the electrons should not be removed. Five, the LED lamp that still has glass in the market at present, this kind of is one-time, two is to use the bad of glue stick to be thrown away, have no maintenance value. Don't take it down and you may hurt your hand.
- Q:What happens to leds if they are not compatible with electronic ballast? What if it's not a bright flash?
- Online are the so-called compatible led ballast, inside it is a constant current for high power led drive power supply, in order to adapt to a variety of different types of leds, it also has different output current varieties, also wants when buying according to the current to select the same current in the led lamp ballast compatible led, it with the ordinary led special-purpose ballast (is actually led a dedicated switch type constant current drive) is the difference on the power (which is the same kind of led do various tubes are common) is large, the range of output current of 300 ma compatible ballast, for example, it can automatically adapt to the current 300 ma from 9 w - any power between 25 w led bulb, but also has the smallest biggest range, the only requirement is that current to be the same.
- Q:The LED fluorescent tube plus the ballast why is it still going to press?
- The ballast is not the condition that the voltage is raised, and when it is energized, the generator switches in the circuit, which is connected by a neon discharge tube with a capacitor
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
LED TUBE LIGHT 10W 60CM RA>70 PF 0.9 AC85-265 INPUT VOLTAGE 800LM GLASS MATERIAL
- Loading Port:
- ShangHai
- Payment Terms:
- TT ,LC AT SIGHT
- Min Order Qty:
- 10000 pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords