Led Tube Lights T8 high luminous efficacy AC directly drive
- Ref Price:
-
$3.20 - 3.50
/ pcs
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5 PCS
- Supply Capability:
- 500000 PCS/month
- Option:
- AC Directly Drive
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Products features
1. Aaward-winning technology of 2014 Geneva International Exhibition of Inventions
2. Patented AC (Alternative current) directly drive.
3. No LED driver design, replace the LED driver by AC chips, more stable and reliable.
4. Prolong the service life of T8 tube to 50,000 hours, it is 2 times as long as traditional driver.
5. High light efficiency. Use high quality SMD chips to ensure the high light efficiency
6. Low lumens depreciation. Less than 3% per year. The users needn’t to replace the tube during 4-8 years.
LED T8 tube 18W | |
Electric parameter | |
Power | 18W |
Voltage | 160～270V AC，50/60Hz |
Power Factor | ≥0.95 |
Operating Temperature | -40℃~50℃，20%~90% H.R. |
Storage Temperature | -40℃~80℃，10%~90% H.R. |
Optical parameter | |
Color Temperature | 5500-6300K |
The LED type | 5630 SMD LED |
Number of LED | 80 PCS |
Angle of LED | 120（Degree） |
Luminous Flux | 1530Lm |
Photosynthetic efficiency | ≥85Lm/W |
Physical parameter | |
Level of Waterproof | IP55 |
Service life | 50000 H |
Electrical categories | ΙClass |
Lamp cover material | High light transmittance glass tube |
Lamp cover color | Milk white |
length | 1200mm |
diameter | 26mm |
Lamp weight | 0.41Kg/0.904lbs |
Mode of package | 30Units/Ctn |
Package measurements | |
Package weight | 15.3KG （33.8lbs） |
Revolutionary no driver LED, Alternative directly drive, high efficiency and stability
Pioneered the AC directly drive LED solution, replaced the traditional LED driver by TF-11 and G13 chips. The patented technology won the award of 2014 Geneva International Exhibition of Inventions. The reliability and service life of LED are improved enormously by AC directly drive solution. The service life of AC drive solution surpasses 100,000 hours.
High grade luminous source
Professional encapsulated SMD 5730 with high quality LED chips ensures the LED resource obtaining excellent protection of optical attenuation and the heat conduction ratio. Reduced the optical attention rate to the minimum value as 3% per year.
Triple heat dissipation, Super long service life.
Utilizing high thermal conductivity aluminum plate, high purity glass tube and no LED driver consumption, the triple heat dissipation design ensures that chips can conducting the heat rapidly. Our LED tubes are driven directly by Alternative current without delay start, unaffected by electric fluctuation. The service life of T8 tube is more than 50,000 hours and it’s 2 times than that of traditional LED driver tube. So users needn’t replace the tube in 4-8 years.
Uniform illuminance, Comfortable visual sense
The LED tubes use high luminous transmittance glass tube to reach high transmissivity, the transmissivity over 99%.
The surface of tube was frosted without light spot. The light is soft and pure spectrum, high CRI ( color rendering index )without ultraviolet ray, infrared radiation, ensure users a comfortable visual sense.
Our tube process soft light, pure spectrum, high CRI ( color rendering index ) without ultraviolet ray, infrared radiation to ensure users a comfortable visual sense.
- Q:Led lamp tube t8 good or t5 good
- Select T8 or T5, depending on the installation environment. The average household chooses T8. Baidu LED, which knows the team's response, is looking for adoption.
- Q:The difference between an LED tube and a daylight lamp
- A diving LED tube is usually blue. You are? This light is useful for red grass and sea water tanks. You don't need a koi. If you want to use a white LED lamp mixed with a light-colored LED lamp or a red, blue and green light bulb. Red, blue and red blue (purple) mixed light is bad for viewing. Add a white light blend. You can't raise the two kinds of fish that you raise, and you don't have a lot of light on the lights. As long as it doesn't affect the view, it can continue.
- Q:Is the normal daylight tube replaced by an LED line
- Step 1: use a screwdriver and a pliers to disconnect the ballast from the wire. But my home is the sun lamp base of zhengtai, the quality is too good, it took 10 years. I didn't even get down to the ballast, which was stuck in a full thick iron base, so I disconnected the wire. The wire that disconnects from the ballast is sure to have two heads, just to disconnect the connection. There is a lot of direct skewers of black tape, some of which use that connector and screw the two wires together. It's the same thing. This is the connector that is used in this case. Disconnect the regenerator, remove the wire and then rewire the two broken wires together and attach the black tape (which is the insulating tape). Put the base back to the original. Install the fluorescent tube, and remember to place the head of the European logo on the base of the current. And when you put it in place, it's going to be OK.
- Q:Ordinary fluorescent lamp ballast can be replaced with led daylight lamp tube
- The fluorescent lamp tube changes LED lamp tube, need to change the line, remove old ballast and the generator, connect the power directly, because, the LED lamp tube has the power source inside.
- Q:What kind of lamp tube is the 2G11 lamp of LED fluorescent lamp
- The T8 / T10 is named based on the diameter of the tube, such as T8 is 26mm and T10 is 30mm. The two g11 is a single and two-tube type, and the lamp can be paired with a single row of four pins, which can also be double-lined
- Q:Buy LED fluorescent tubes to see which parameters
- LED fluorescent tube parameters include: LED, total light flux, color temperature, color index, total harmonic distortion, average life, protection grade - etc. As a user of the outside line, it is impossible to know and can not judge its parameters true and false. The only thing you can refer to when you buy a brand is that it is less likely to be fooled.
- Q:20wled bulbs are more energy-efficient than 20w fluorescent bulbs
- LED power, which USES electricity at the same brightness, is 80 per cent of other appliances.
- Q:The circuit board in the LED fluorescent tube, what's the name of the component?
- Hello, I have the same question as you, and this board, I wonder what the components of the unit are called?I hope my answer is useful to you.
- Q:Can the LED tube be installed as a general lamp holder? It won't burn easily
- Not necessarily, if you buy the lamp belongs to universal, some tubes into line is at one end of the tubes, so again after confirm the specification on the connection mode, when compared with the ordinary lamp holder, if can be general, will not burn.
- Q:A 30-watt light bulb can be used for a change of LED lamp
- Replace the led tube with rewiring; The original fluorescent lamp ballast is usually removed, and the led tube is a single terminal connection or a double end connection. If you look at the packaging or instruction of the led tube, there is a connection method.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Led Tube Lights T8 high luminous efficacy AC directly drive
- Ref Price:
-
$3.20 - 3.50
/ pcs
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5 PCS
- Supply Capability:
- 500000 PCS/month
- Option:
- AC Directly Drive
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
