MR16-06 Spot Light Reflector Replace 20W halogen lamp
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 500 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Production's Characters Description：
1.Higher brilliant and lower electric cost than the fluorescent bulb
2.No flickering and eyesight protection
3.COB LED inside
4.TÜV Rheinland CE certified
5.Europe ErP stage II grade and Energy efficiency Class A+
6.Replace 5W compact fluorescent lamp and 40W incandescent lamp
7.Dimmable & no dimmable
Application
It's widely used in home use and commercial use lighting.
Pictures
Cautions
1. Switch off the power before replacing the lamp.
2. Keep away from direct sunshine and high temperature.
3. Indoor use only, only when the IP class is over IP65.
4. If any doubt about the installation or use of this product, consult a competent electrician.
Trade Terms
1.Payment: by T/T , Paypal or Western Union
2. Lead time: 5-15 days, subject to the order quantity.
3. Delivery ways: DHL, EMS, UPS, TNT door to door service, by sea, by air, etc
4. MOQ:500pcs
5. Discounts are offered based on order quantities
Quantuty
Quality goal：Constant innovation to meet the request of the customers. Protect the environment, provide environmental products to customer.
Quality strategy：
Quality: established high efficiency quality manager system in line with ISO9001 and ISO/TS16949.
Improvement: keeping improvement & quality guarantee.
Efficiency: delivery on time, complete the agreed events with the customers on time.
Service: focus on customers, provide the service and technology support on time.
FAQ
1. How long will my inquiry get response?
Your inquiry related to our products or prices will be replied within 24 hours.
2. Can I get professional service and suggestion?
Well-trained and experienced staffs to answer all your questions in fluent English.
3. Do you accept OEM or customized design?
OEM & ODM, any your customized lightings we can help you to design and put into product.
4. What if I need specific design?
Distributorship are offered for your unique design and some our current models.
- Q:The LED lamp aging is what mean
- LED lamp need to aging, is light to need light test, general ageing time for 24 hours
- Q:Led track light to shoot the light can not track meet 220 - volt power supply directly
- Led products are usually equipped with a driving power, please access to the manufacturer of driving power supply after use, so as to avoid damage to the lamps and lanterns. Power refers to the power source, a meter can amount to the output voltage. Is a kind of power conversion circuit, a so-called drive will be some form of fixed power into different voltage and/or different forms (ac or dc) is another kind of power supply, supply specific power demand of electrical appliances. So the driver himself into power after turn on the juice. Electronic products commonly used power adapter also is a kind of electronic products of the external drive. The LED chip is working in the low voltage dc, generally need to drive to provide stable voltage and the safety of current. The LED driver with built-in, there are external. Has internal drive leds is specified using power (such as ac mains, battery, etc.) through to can use. Need the external drive LED lights will be added with the appropriate power adapter (or external drive) to transfer the original power supply (such as mains, battery, etc.) to provide power LED chipset conform to the requirements of the work. If think reply results can please adopt oh O (studying studying) O thank you, if you have not understand place, please continue to reply.
- Q:18 w changed other power drive not bright LED lamp, what reason be?
- Light is normal, do not see your original drive, is 18 series, namely voltage must achieve 3 * 18 = 54 v, 1 to 2 and 10 series of drive, the highest nominal output voltage only 36 v, paragraph 2 of nominal only 42 v (actually this drive is problematic, 16 * 1 w drive maximum voltage should be more than 48 v, actually should be 50 v
- Q:Led to shoot the light is broken how to change
- Nails dig is commonly used in the edge of the lamp tube (position) linking to the smallpox condole top, a little bit hard pull became one! Two used to locate the wire spring clip!
- Q:What kinds of leds are included?
- MR16, GU10, GU5.3 lamp holder (or holder) models, are these MR16 is two needles into, low pressure, need to be equipped with a driver; GU10 and GU5.3 is high voltage 220 v. And spiral lamp holder E14 and E27, E27 is home commonly used lampholder, E14 smaller than E27. As we have the CPL lamp cup lamp holder. As for the LED lamp is roughly including LED lamp cup, LED ceiling lamp, LED downlight etc, PAR lamps and the LED lamp, LED bulb is not big. Because the lamps and lanterns of LED lamp is refers to the condenser, and the ball bubble lamp is glistening divergence.
- Q:What do you need for homemade LED lights
- Teach you the easiest way to do With 2.5-2.8 v dc power supply can be used in parallel.
- Q:What is the main purpose of LED to shoot the light? What is the difference between it and the ball lights, mainly performance and USES.
- According to zhongshan light lamps and lanterns manufacturer factory introduced tao LED lighting lamps and lanterns, LED projector lamp and LED underwater lamp, LED buried lights, LED wash wall lamp, etc. Can be used independently, also can be used alternately, which result in more volatile, and LED projection lamp is mainly used for monomer architecture, historical buildings exterior lighting, landscape lighting, building outside light through lighting, billboard lighting special facilities such as lighting, lighting and bars, dance halls and other places of entertainment atmosphere, such as market development prospects.
- Q:12 LED lamp power driver is good But not all bright can fix
- This is all 12 lights series, if really bad one, all all is not bright, but the short it is ok to pick up the bad. You can live under test lamp red black line on the board, the normal light bead on the voltage should be within 36 to 40 v. If the drive is normal, and light bead is broken is not bright, voltage should be in more than 50 v, even more than 200 volts.
- Q:Old energy-saving lamps to replace myself home of smallpox, bought the Led ceiling lamp small transformer two outlet with L, N, and their charged to check the two connection of the old lamp base, there are thermal power, and ask the customer service, selling Led lights under said can both zero firewire, ask you confirm it, thank you
- Can completely, goal of communication is, you can rest assured, have installation problem about led tube light can find directly,
- Q:The 3 w LED lamp color temperature is how many?
- Color temperature can be according to customer's request to change You say you need 4500 k white light Speak as long as the root producers understand, can make From 2800-8500 k can be done
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
MR16-06 Spot Light Reflector Replace 20W halogen lamp
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 500 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
