NFG Nature Flake graphite Graphite 80 MESH
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
SPECIFICATIONS
NFG Nature Flake graphite Graphite 80 MESH
NFG / Nature flake graphite / Graphite:
Chemical Analysis Typical (%)
F.C. 95%min
Ash 4%max
V.M(Volatile matter) 1.2%max
SIZE +80mesh
pass rate 80%min
Moisture 0.5%MAX
S 0.2max
PAYMENT TERMS
NFG Nature Flake graphite Graphite 80 MESH
Payment: 30%T/T advance payment,see the fax of B/L pay the balance
PACKING
NFG Nature Flake graphite Graphite 80 MESH
25KG PER SMALL BAG AND 1000 MT INTO A JUMBO BAG
IMAGES
NFG Nature Flake graphite Graphite 80 MESH
Advantages
NFG Nature Flake graphite Graphite 80 MESH
Perfect crystallization, thin flake, good flexibility, excellent chemical and physical properties, superior conductivity, self-lubricity and resistance to temperature, and hot shock, and much more.
- Q:Like the wolf, adding graphite powder in the failure of electronic instrument air explosion in aircraft rocket season, really make it
- Unable to do so, although the graphite can make cars, aircraft and other short circuit, but the aircraft is basically insulated, airtight, the engine is not affected. This is the need for film and television work.
- Q:Are graphite and carbon black the same?
- But they are not the same as the atomic structure, physical properties are not the same, the graphite conductive carbon black than how many times, lubricating graphite is much higher than carbon black, graphite and carbon black light can be separated from these two points is not the same, there are more different places.
- Q:What is the industry standard of graphite powder coating for casting?
- One is purity, that is, the size of impurities, the smaller the better.
- Q:Sunshine door lock winter treatment
- Check the locking gap between the lock body and the locking plate regularly, whether the lock tongue is matched with the height of the locking plate hole or not, the optimum clearance between the door and the door frame is 1.5mm-2.5mm. In case of any change, the position of the door hinge or the lock buckle shall be adjusted. At the same time pay attention to the weather (spring wet, dry in winter) caused by cold contraction, thermal expansion, to ensure that the door and door frame, locking body and the locking plate gap reasonable coordination, in order to ensure the smooth use of locks. When you buy, you can ask the manufacturer directly.
- Q:Graphite powder what is the difference?
- Graphite is a isomer of carbon, chemical symbol C, non-metallic, non-toxic, relatively smooth, can be rubbed on the key, harmless to the baby.
- Q:Why does the temperature rise when the graphite powder is turned on?
- The presence of resistance, melting point at 3850 + 50 degrees C, graphite powder is a very sensitive chemical substances, in different circumstances, his resistivity will change, that is, his resistance value will change
- Q:Can graphite powder be used for concrete?
- The graphite powder is soft, black and gray, greasy and polluting paper. Hardness is 1~2, along the vertical direction with the increase of impurities, its hardness can be increased to 3~5. The specific gravity is 1.9~2.3. Under isolated oxygen conditions, the melting point is above 3000 degrees Celsius and is one of the most refractory minerals.
- Q:What is the ratio of the coated sand to the graphite powder? How to improve the refractoriness of precoated sand
- In addition to improve the refractoriness with graphite, can also add red. It also plays a role in increasing refractoriness and reducing gas output.
- Q:Whether the ordinary graphite powder is sprinkled on the electronic instrument can lead to the malfunction of the instrument
- If the graphite powder in electronic instrument, contact electric circuit, it will cause a short circuit or lead to equipment failure, want to know more information and knowledge can be graphite powder, graphite powder to Qingdao Huatai to understand, can understand the causes of graphite powder, instrument failure hope to adopt, thank you L.
- Q:Influence and protection of graphite dust on electrical equipment in workshop
- The graphite dust in the workshop is conductive, and the adhesion to the electric apparatus will affect the electrical insulation and lead to accidents. So we need to have the electrical box of graphite dust workshop to closed treatment, to prevent dust into the electrical cabinet.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
NFG Nature Flake graphite Graphite 80 MESH
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords