PET PP strap band tape production line / PET PP packing tape band production line / PET PP packing strap extrusion line
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PET PP strap band tape production line / PET PP packing tape band production line / PET PP packing strap extrusion line
Products model:
Width: 9mm-25mm (can be adjusted according to client's production demand easily)
Thickness: 0.5mm-1.2mm (can be adjusted according to client's production demand easily)
Capacity: 1T-2T/Day(24 hours)
Total power: 120kw-160kw (380V, 50Hz)
Accurate dosing and raw material blending
Preheat and dry circulating automatically
Even plastication,stable extrusion and exact temperature control
Measuring pump ensure consecutive and stable production
Big hauling force strething device and insulation oven
Big capacity stainless steel water trough,automatic liquid level control
band width | 9-32mm |
production linear speed | 80m/min |
strech ratio | 4-9 |
max.output | 60-200kg/h |
plastic pet strap machine line configuration reference
No | Name | Qty. |
1 | Vacuum loader | 1set |
2 | CSG2000 dehumidify dryer | 1set |
3 | S90/33 single screw extruder(can be adjusted according to client's demand) | 1set |
4 | Hydraulic screen exchanger | 1set |
5 | Melt pump | 1set |
6 | Mould | 1set |
7 | Water tank cooling system | 1set |
8 | Haul-off machine | 1set |
9 | Heating oven | 1set |
10 | Preheating machine | 1set |
11 | Drawing machine | 1set |
12 | Embossing machine | 1set |
13 | Hot forming machine | 1set |
14 | Haul-off | 1set |
15 | Winder (double position) | 2sets |
16 | Chiller | 1set |
17 | Mould temperature controller | 2sets |
Features of pet strap machine / pet strap production line :
1.Adopts advanced CSW-800 comby dehumidify dryer system. It make sure the material humidity at 80PPM at 50PPM dew point. Meanwhile, it compact material and increase the viscidity.
2.Adopts closed cycle transport system after dryer to avoid contact with outside air and make sure the material be dry continuously.
3.Extruder adopts special screw for PET. The screw has unique separate and mix property to make sure uniform plasticizing. The screw suitable for recycled PET bottle flakes, PET mixture and original PET material. And the extruder adopts ration forced feeding to make sure the stable extruding. It makes sure the product uniform.
4.Produce different model product at one die and mould. Adopts hydraulic screen exchanger
5.Static cooling roller replace the water cooling tank. The roller will cool the strap at the constant temperature. It improves the product's stretch intensity.
6.The strap after formed will be warm and anneal treated to wipe off the part stress remained after stretch. It makes molecule tropism be steady to avoid strap distortion caused by storage.
7.The winder adopts double work position and auto-meter. It is easy operation and convenient coil change.
8.Centralized electrical control, PLC self-correcting control. Easy operation.
- Q:How many venues will it take? How much does it cost?That's what recycling plastic bottles break. Sell again.What's the machine and how much does it cost? What should be done after breaking? If you make a semi-finished product, you can't sell it wellIs there any profit on this line?
- Low profits, hard death, can not make a few money
- Q:What equipment? How much money do not.. at first. There are several sets of injection molding machine can be about 2... Mainly plastic injection molding. The ABS PA PE PP PVC... Etc. in this area. Please know that a friend told Kazakhstan. Thank you.
- Do PVC also dedicated screw, because PVC easily decomposed, and after the decomposition of the cylinder, screw, as well as mold are corrosive. Other material requirements are not high, so when you buy the machine, you must tell the manufacturer of your material.Equipment needed:1. injection molding machine2. pumps {pumps cooling machine mold, two units, the single-phase can be}
- Q:How does a lathe process a plastic flowerpot mold?
- Therefore, the plastic mold making is not a simple mechanical processing, but needs to be completed from a series of processes, such as drawing design, mechanical processing, fitter polishing, assembly and die testing.
- Q:The processing of plastic bottles
- The production process of plastic bottle has two kinds: the first kind is extrusion blowing process, the plastic raw materials into the extruder, the melting extruding molten parison, then put the bottle mold blow molding, cooling after removed from the mold, eliminating waste edge to be finished after. This process is mainly used to produce polyethylene, PVC plastic bottles, such as milk bottles, soy sauce bottles and so on. The second is the plastic material injection stretch blow molding process, the injection molding machine injection molding tubular billet, then put the bottle mould through stretch blow molding, cooling after the finished product is obtained. This process is mainly used to produce PET plastic bottles, such as mineral water bottles and so on.
- Q:I would like to open a small plastic daily necessities processing factory, want to buy such as plastic buckets, plastic basins, plastic small bowl machinery!
- Similar processing machinery, you can go to the machine processing and other similar websites to check
- Q:The plastic bottle processing plant needs those machines
- Blow molding machine. Where are you? I'm thinking of buying machines, too
- Q:Benefits of plastic products
- 1., light quality 2., no rust 3., can be used to prepare fuel oil and fuel gas
- Q:The next 5 to 10 years, small workshops waste plastics processing prospects for development?
- China's plastic machinery industry production enterprises are large, most enterprises seriously deviate from the economic scale, production equipment backward, technical progress difficult situation is still serious. But some enterprises grasp the trend of market demand and technical development, through technical transformation effectively seize market opportunities, develop economic indicators of economic scale backbone enterprises begun to take place before the sort of product sales enterprises accounted for about twice the total domestic plastic machinery sales. So far, China's plastic machinery products are still medium, small as the mainstream, production has been in the world for many years.In 2012, China exported 69297 sets of plastic machinery, with a total amount of 1 billion 618 million 868 thousand US dollars, with an increase of 10.5% over the same period of last year, and the growth rate fell by 17.9% compared with 2011. Imports of plastic machinery 10482 units, total 2 billion 126 million 350 thousand U. S. dollars, the number of imports and the amount of year-on-year decrease, of which the amount of imports decreased by 2.4%. The year 2012 presses trade deficit of $507 million 485 thousand, compared with 2011 deficit significantly reduced.In 2013 the number of China machinery import 10052 units, the amount of imports of about $1 billion 820 million, and last year fell by 4% and 15%; exports, total exports in 2013 China machine 135213 units, the export amount of approximately $1 billion 720 million, an increase of 94% and 7% respectively.In the first half of 2014, China imported 4156 injection molding machines, an increase of 63%, and imports amounted to 398 million 650 thousand U. s.dollars, an increase of 18%.
- Q:What are the methods of forming plastic products introduced in this course?
- 4 、 injection moldingInjection molding is often used in thermoplastics. It is similar to extrusion molding. The difference is that the molten plastic enters the closed mold through the nozzle and solidifies in the mold to produce the product. Multi production small package boxes, daily necessities, special-shaped parts, etc., it can also be used for lively plastic processing5, blow moldingBlow molding is often used in thermoplastics. This is the molten plastic in the mold, under the compressed air pressure, the plastic blow up, close to the mold surface. It is produced by punching and demoulding. It also produces many kinds of hollow packing containers, and also produces films, sheets and so on
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PET PP strap band tape production line / PET PP packing tape band production line / PET PP packing strap extrusion line
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords