Primer Spray Paint for Casting Iron,Iron Oxide Gray
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 2 m.t.
- Supply Capability:
- 500 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Structure of Primer Spray Paint Description
The product is a kind of quick-drying thermoplastic acrylic acid.Easy to operate,with good atomization and sufficient spray.The paint coating is quick drying hard,thick and has an excellent luster adhesion.
2.Main Features of the Primer Spray Paint
• Very fast drying.
• Good adhesion.
•Excellent resistance to water and weathering.
3. Primer Spray Paint Images
4. Primer Spray Paint Specification
TYPE | Antirust paint based on alkyd resins with red oxide pigments. | |
USES | Antirust under coat for steel. | |
CHARACTERISTICS | 1. Very fast drying. 2. Good adhesion. 3. Excellent resistance to water and weathering. 4. Reality low cost. | |
GLOSS | Flat | |
COLOR | Gray | |
WEIGHT | Above 1.3 kg/L | |
VISCOSITY (25 °C) | 90 - 100 KU | |
DRYING TIME (25 °C) | Set-to-touch Dry hard | 0.5 hrs. 2 hrs. |
OPTIMUM FILM THICKNESS | Wet Dry | 90μ(microns) 40μ(microns) |
OVERCOATING INTERVALS (25°C) | Min. 6 hrs. | |
NON-VOLATILE CONTENT | Above 65% | |
THINNER | Toluene | |
THINNING RATE | 70~%(depends on tools used) | |
APPLICATION METHOD | Airless Spray, Brush, Roller. | |
NOTE | 1. Moisture, grease, rust, dirt and loose paints film on substrate must be removed. As a result, paint performance can be ensured. 2. Before application, stir paint evenly. When paint is too thick, thinner can be added within specified quantity 3. Application should avoid the following environment: rainy day; substrate is damp by dew; temperature is above 40°C or below 10°C. 4. Subsequent coat has to wait until paint films of preceding coat completely dry off. |
5.FAQ of Primer Spray Paint
① The Directions?
1. Remove thoroughly the oil, soil, water stain and dust from the surface to be sprayed.
2. Shake the can well for about half a minute before spraying.
3. Apply first on an invisible part to make sure the selected color is well matched
4. Keep 15-30 cm away from the surface to be sprayed.
5. In case of little paint or only gas out, turn the nozzle 180° and try again.
6. During spraying, keep the can upright within a vertical angle of 45°.
7. After use, clear the valve and nozzle by spraying upside down for a few seconds.
②What's the usage?
Appliance Paint,Boat Paint,Building Coating,Car Paint,Electrical Insulating Varnish,Furniture Paint,machine.
③How about your company?
A world class manufacturer & supplier of castings forging in Spray Paint.This is a manufacturer of tin product,such as aerosol can,food can,beverage can and so on,we began to supply service,and main service is : shaving foam,insecticide,air freshener,super carb cleaner,dash board polish,furnithure polish,polyurethane foam,leather polish,etc.
With advanced machine and perfect insect system,quality of every product are well guaranteed.
- Q:Giraffe paint and bauhinia paint which brand is good
- They belong to the same grade, in the paint industry is second-tier brand.
- Q:What is the secondary crystallization and post-crystallization of the polymer?
- As the name suggests, the secondary crystallization is in the first crystallization, the late occurred in the initial crystal structure under the imperfect site or occurred in the initial crystallization of the amorphous area of the phenomenon of re-crystallization in the stress, annealing is occur.
- Q:What kind of paint is good for home improvement?
- Antirust paint, for nail and steel structure of the rust treatment;
- Q:I OKorder bought a p5, said that the polymer battery, I would like to ask what is lithium, if not, this battery need to fill every time? Or how much can be filled with how much?
- Polymer battery is a lithium battery, lithium batteries are generally divided into steel shell, aluminum, polymer lithium battery These types of batteries industry is generally called the polymer lithium battery for the soft lithium battery real lithium polymer battery, the use of solid Or gel electrolyte, the safety performance is very good, but the current market, the so-called polymer battery is only soft lithium-ion battery. According to the characteristics of lithium batteries, the use of the battery must not be fully charged to use, there is urgent need to use directly on the line but recommended as far as possible full of electricity, after all, lithium battery with the increase in the number of times, the battery capacity is declining, This can reduce the number of charging, increase the service life
- Q:Do you have accurate data? Is it different because of the density of different paints?
- Dulux 18 liters of 25 kg you count yourself
- Q:Sichuan Guangya Polymer Chemical Co., Ltd. treatment
- Ability to determine the post, is to let the sage in office, who can work In the human resource management to attract, select, use and training and other aspects of the introduction of market mechanisms, through open competition, preferred employment, enable those who are on the flat, let the next.
- Q:My walls are painted a light color and there are many dirty marks on them. Is there a way to clean them without harming the paint?
- Any multipurpose cleaner works. Start at the BOTTOM. If it's flat paint, NOTHING will work without taking the paint off, too.
- Q:What are the links and differences between varnish, paint and water-based paint?
- Paint is a kind of oil paint, paint his solvent is organic, such as butyl acetate, xylene and the like, additives are also oily paint and water-based paint is water-based, additives are generally soluble in water. Paint and water-based paint are actually paint, but people used to build water-based paint paint. Water-based paint volatile out of the main water, more environmentally friendly.
- Q:Polymer lithium battery and lithium iron phosphate battery What is the difference? Which is better?
- Lithium-ion battery Negative is a carbon material, such as graphite. The positive electrode is a lithium-containing transition metal oxide, such as LiMn2O4. The electrolyte is an organic solution containing lithium salts. Usually lithium-ion batteries do not contain metal lithium. Driven by lithium ions from the positive lattice in the lattice, through the electrolyte, embedded in the negative lattice ...
- Q:How long does the ink on the inkjet printer cover up for a long time?
- After opening the general preservation time is half a year, but this should ensure that the ink is not subject to 2 times the case of pollution
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Primer Spray Paint for Casting Iron,Iron Oxide Gray
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 2 m.t.
- Supply Capability:
- 500 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords