Roll Forming Machinery -Sandwich panelPRL-6-SA2
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information:
We can designthe line to make different kinds of panels in appearance, for wall panel androofing panel with various joint designs.
Sandwichpanel, as a new building material,shows excellent performance oninsulation.
It is takingthe place of brick to be a main material for building now.
High speedslitting and cut to length can cut steel with thickness from 1mmto 16mm, if noneed slitting thickness up to 30mm.
Processing flow is as following:
Carry coil→loadcoil→de-coiling(pressingguide +opener)→entry、roughlevel→cutting→transition→guide→slitting (waste winding) →loopingstorage→pre-separating, damping→recoiling→packing→discharging→guide→leveling→fix size (end platefeeding)→cutting→discharging
Technical Data:
1. TheManufacture Speed Of Sandwich Panel:8.6m/min( frequency conversion to adjustspeed)
2. TheThickness Of Sandwich Panel:30-200mm
3. TheThickness Of Steel : 0.4-0.8mm
4. TheLength Of The Production Line : about 120 meters
5. TheTotal Power Of The Production Line : 350 KW
6. TheLength Of The Double Belt Conveyer : 24m
- Q:How is the sandwich plate synthesized?
- The finished products of the sandwich panel are easy to install, light and efficient. The filling system also uses the closed bubble molecule structure to prevent the condensation of water vapor.
- Q:Can the oil on the sandwich board be painted?
- When spraying, the thinner is easy to penetrate into the plate, the sandwich board is glued laminated board, it is easy to dissolve the glue, the separation of the layer.
- Q:Color tile and color steel sandwich plate what is the difference, the use of what is the difference?
- Also known as color: color steel tile is used in color coated steel sheet, roll cold forming pressure plate and various wave types, it is suitable for industrial and civil buildings, warehouses, special buildings, large-span steel structure house roof, walls and wall decoration etc.
- Q:What is the color steel sandwich board?
- The intermediate sandwich panel is two color steel with polyurethane foam with a layer of insulating material.
- Q:Can the sandwich board adhere to the plaster line?
- Gypsum lines and gypsum board belong to the decoration "surface layer", the same strength of the structure, and therefore can not be based on each other. That is to say, it must be attached to the joinery board below.
- Q:How can the wire laying in the foam sandwich panel workshop meet the fire protection requirements?
- New composite plate is a new type of building materials developed rapidly in five to ten years, because these new building materials can meet the technical indicators of building structure, insulation and other related aspects, and has the advantages of low cost, light weight, convenient construction investment Sheng, reusable characteristics, has been strongly recommended by the administrative Department of construction.
- Q:Polyurethane sandwich panel production line?
- Products are mainly used for exterior wall insulation and central air conditioning, air supply pipe. The working principle of polyurethane perfusion machine by measuring liquid pump in a certain proportion into the mixing head after mixing evenly pouring in sandwich bottom material, and the upper surface of a layer in the layer of transport to the press, press under the chain plates foam curing; sandwich plate after curing in the production line both sides trimmed, automatic track cutting machine cut to length of the products.
- Q:Characteristics of sandwich panels
- Light weight, less than 24kg per square meter weight, can fully reduce the structural cost.
- Q:What's the difference between a polyurethane sandwich panel and a foam sandwich panel?
- Foam sandwich board, beautiful shape, bright color, good overall effect, it sets the bearing, thermal insulation, waterproof in one, and no two decoration, is a widely used, especially in the temporary facilities for construction sites such as office, warehouse, wall and so on, but also the modern construction site civilization construction.
- Q:What are the causes of uneven surface of polyurethane sandwich panel produced by continuous production line?
- The upper and lower track plates of the fixed polyurethane plate are not smooth, mainly because of the processing problem, the chain drive polygon effect or the equipment level is not adjusted properly;
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Roll Forming Machinery -Sandwich panelPRL-6-SA2
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches