TPU Film Used for Medical Devices of CNBM in China
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Introduction of TPU Film
Compared with the PU film, this kind of TPU film is with:Better elasticity, waterproofing, wear resistance, tear resistance and anti-yellowing.High temperature resistance and cold resistance.
Good for outdoor usage.High resistance to oils, grease and solvents.Good resistance to weather exposure.
2.Application of TPU Film
Pallet Wrapping
Compacting & Bunding
Shipping
Handling & Protection
Moving & Storage
Garden
Home
ndustrial & Commercial
DIY
3.Advantage of TPU Film
lightweight——low density 0.928 g/cm3
Durability——due to it’s good flexing and cold resistance
Good toughness
easy edge-tear processing, soft hand feeling
Available for silk screen and offset printing
Non-toxic and without plasticizer, can reach the standard like: FDA, REACH,ROHS,EN71-3
The similar price VS PVC, but more eco-friendly
4.Packing of TPU Film
CNBM TPU film is packed by Seaworthy Packing
5.Pictures of TPU Film
6.Specification of TPU Film
Model: TF series | Origin:Jiangsu China | Materials:TPU film |
Depth:0.012-1(mm) | width:1-2(mm) | Tensility:OK |
Air permeability: Low penetration | Property instruction: Transparent | |
1)thickness0.012mm~1mm
2)width:1-2 m
3)longth:<(=)1500m< span="">
4)colour:can be coloured as requirements
5)180° Strip Force:0.3N/25mm~3.0 N/25mm
6)viscous force(40,1kg):>(=)24h
7.Remarks
Our TPU products have passed the inspection of many international well-known tests such as SGS, ASTM, JIS, FDA and so on. Our TPU products are environmental friendly, non-toxic, water resistant, anti-yellowing, hydrolysis resistant, cold tolerant, high temperature resistant and good tearing resistant. Our TPU materials are not only applicable to the modern production field of articles for daily use, but also suitable for military - industrial complex, medical, electronics and other production areas such as for cricket bat, clothing, shoes, medicines, national defense, electronics, packaging materials, Inflatable products, waterproofing material, stone chip protection, high-end building sticker, solar protection film and so on.
8.FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your company？
A world class manufacturer & supplier of castings forging in carbon steel and alloy steel，is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirements.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q:There are two screens in the computer screen. One side says "A", and the other is "B". Do you need to paste A first and then paste B? Do you have two at a time? Thank you
- 3., after the good, and then start from the label, tear off the layer (in front of your layer) release film.
- Q:How to clean up the protective film on the stainless steel door! ! !
- Many people have the same question. The protective film on the stainless steel door is difficult to remove after using fot a long time. Does it work to heat the film with electric hair drier? Is there any other ways? The answer is yes. There are many other ways: 1. If the film is not too big, you can apply some lacquer thinner to it and then scrub it with cleaning ball. 2. Detergent used in textile industry will work (Bottled such detergent is called AL). I've tried it. It really works well. 3. Use sulfuric acid. But you should mix it with water before use, otherwise the door will corrode. Immerge the door into the mixed sulfuric acid for a period of time and scrub it with cleaning ball. 4. Firstly, use electric hair drier to heat the film. And then slowly tear it off or scratch it off using small wooden shovel. The marks left by glue can be wiped off with solvent.
- Q:Do you know if there is a computer screen that can be seen only from the front?
- Yes, the computer city can buy, not expensive, more than 20 yuan.
- Q:How to use super light clay to make transparent protective film?
- The simplest way is apply it with a layer of transparent glue over and over again and wait until it gets dry.
- Q:Does anyone know of a glue that sprays up to form a protective film?
- Is it for drawing? The glue can be mixed with water and stir well. Pour into the spray gun and spray.
- Q:What are the main components of PE protective film?
- Polyethylene film is the main component.
- Q:How many kinds of material are there in the decoration ground protection film?
- PE is the most kind of protective film, divided into PE film, PE electrostatic membrane, PE mesh film, PE stretch film, PE packaging film, viscosity from 5g-270g, thickness from 1.5C-15C. The most commonly used is 5C.PET protective film has silica gel PET, acrylic adhesive PET, frosted PET, three layer PET, single layer PET, double layer PET, PET release film. PET protective film is usually used as screen protection, and PET film is often used for die stamping of PET protective film in die cutting factory. The most commonly used punching dies are 5C and 7.5C. The commonly used parting films are 2.5C, 3.8C, 5C and 7.5C.
- Q:How should the PET protection film identify his viscosity?
- 1 Characteristics: viscous, docile, anti solvent, use at room temperature line straight, no residue.Usage: suitable for upholstery and general industrial shading.
- Q:How to remove the protective film on painted iron plate without damaging the paint? The film is very thin.
- Sticking wide adhesive tape to the film and pull the tape to tear off the film.
- Q:What are the protective films?
- . Adhesive protective film commonly used glue has acrylic resin / pressure-sensitive adhesive, silica gel, rubber type glue
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
TPU Film Used for Medical Devices of CNBM in China
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
