Truck and Bus Radial Tyre B588 with High Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 190 pc
- Supply Capability:
- 20000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1,Pattern of Truck and Bus Radial Tyre Description:
The tire can be used to truck and bus.For regional application of drive axle.Applicable for mud and snow road.Excellent grip and traction performance.
This pattern of tyre has low heating up and good high speed performance.Superior drainage by wide main groove,four wide main groove design.
Tyre volume increased,higher drainage efficiency,advance steering performance on wetland,improve drving safety.
2,Main Features of the Tyre:
For mud and snow road
Four wide main groove design.
Low heating up
High speed
3,Truck and Bus Tyre Images:
4,Truck and Bus Tyre Specification:
5,FAQ:
We have organized several common questions for our clients，may help you sincerely：
1,How to guarantee the quality of the products？
We will give clients compensition if the tyre has manufacture defect.Clients just provide tyre NO.and some pictures.
2,How long can we receive the product after purchase?
It up to sizes you order.We can delivery immediately if the size is available.About 30 days after receiving down payment if it should be arrange production.
3,How to get the sole agent?
It up to the market.It should be 3-4 containers per month is small market ,like UAE.But 15-20 containers are requested if you from USA market.
- Q:How many brands are there in automobile tires?
- Michelin is now the best selling domestic tire, characterized by low noise and strong comfortableness, very suitable for the city, which is bridgestones manipulation is relatively good. Goodyear super tire wear, it is more suitable for the complex mountain road.
- Q:The car tires some slow leak, how to fix?
- It is recommended that the worn tires be fitted to the rear wheels of the car. If you have repaired many tires, it is best to do only the emergency use of the spare tire.
- Q:Are the front and rear tires just the same size?
- Tire type markers mostly as 215/70R15, the meaning of these figures are: 215 said tread width, the unit is mm, the general tire width between 145-285mm interval of 10mm; 70 is flat, the tire wall height and tread width ratio of 70, representing 70%, general tire flat ratio between 30%-80%.
- Q:What are the materials needed for the production of inner tubes and pads?
- Tires are often used in complex and demanding conditions. They are subjected to various deformations, loads, forces and high and low temperatures while traveling. Therefore, they must have high load-carrying performance, traction performance and cushioning performance. It also requires high wear resistance and flex resistance, as well as low rolling resistance and heat build-up. Half of the world's rubber consumption is used in tire production. Tires are usually composed of 3 parts of tyre, tyre, cushion belt. The inner layer of the fetus body has the rubber layer with good air tightness, and a special wheel rim is required
- Q:Can the car tyres change from side to side?
- Front of the car's front wheel wear is more serious, after the drive of the car's rear wheel wear more serious - so, cross change will be deviation, but also more damage to the tires, four-wheel drive car wear is not exactly the same. So I suggest: the same size before two on the two, or directly before two or after two when at the same time. Smart car
- Q:Why the truck tire will be issued when his voice
- In addition to the weight of the original car, the most important thing is the dynamic balance of the truck, there is no car good!
- Q:What is the thickness of the front tire crown of a car?
- In general, the thickness of the crown of the car tire is about 13mm (the tread pattern is deep 7mm, the crown thickness is 6mm), and the sidewall thickness is 5mm.Automobile tires can be divided into pneumatic tyres and solid tires according to the carcass structure. Most modern cars use pneumatic tyres. According to the air pressure in the tire, the inflated tire can be divided into three types: high pressure tire, low pressure tire and ultra low pressure tire.
- Q:When the temperature of the tire, the tire will burst
- [prevention of tire burst daily inspection]1, usually to check whether the tire reached the mark of wear (pattern groove depth) police boundaries, the normal use of tire wear to this mark should be replaced immediately.2, at least every two months to check the pressure, not only to observe the amount of subsidence, if the lack of air pressure, should find the cause of the leak.3, often check whether the tires are damaged, such as whether there are nail nails, cuts, found that damaged tires should be repaired or replaced in time.4, two, once the front tire repaired, should be adjusted to the rear wheel used to ensure that two front wheels without any hidden dangers. Remove the stones in the groove in time so as to avoid the deformation of the crown of the tire.5, avoid tire contact with oils and chemicals.6, regular vehicle four wheel positioning inspection, such as found poor positioning, it is necessary to correct in time, otherwise it will cause irregular wear of tires, affecting the service life of tires.
- Q:Automobile tyre symbols
- The tire is an important part of the automobile, the automobile tire marks are more than 10 species, correct identification of these markers selection, use and maintenance of tires is very important, is of great significance for the protection of traffic safety and prolong the service life of the tyre.Tire specifications: specifications are geometric data of tire parameters and physical properties. The tire specifications are usually represented by a set of figures. The first figure represents the width of the section of the tyre, and the latter figure represents the diameter of the rims. They are measured in inches. The middle letters or symbols have special meanings: "X" means high pressure tyres; "R" and "Z" represent radial tyres; "1" means low pressure tyres.
- Q:Pirelli tire truck carrying capacity how
- Pirelli is a special tire car, his main technology is based on the car
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Truck and Bus Radial Tyre B588 with High Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 190 pc
- Supply Capability:
- 20000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
