Y-Strainer With Ductile Iron Body With Stainless Steel
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specification of Gate Valve ：
Control valve for F00VC01003
Common Rail Spare Parts
ISO/TS 16949 Certificated
High quality
High Precision
A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose.
2. Main Features of the Gate Valve：
• Valve body cavity using non-toxic epoxy resin,both inside and outside flashboard completely is coated with rubber
• Free of water pollution
• High manufacturing accuracy
3. Images
4. Gate valve Specification
Gate valve
Ductile iron gate valve
Flange Gate valve
Our company can produce all kinds of valves, If you have any inquiry, please contact us, we will offer you our best price.
5.FAQ
1. What's are the characteristics of gate valve?
The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel.
2. What is the work principle of gate valve ？
The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry.
3. What is the structure?
Bonnets provide leakproof closure for the valve body. Gate valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest, offering a durable, pressure-tight seal. Union bonnet is suitable for applications requiring frequent inspection and cleaning. It also gives the body added strength. Bolted bonnet is used for larger valves and higher pressure applications.
- Q:I would like to give a sink and faucet the appearance of having plumbing for display purposes. Is it possible to use a fountain mechanism to create that effect. I'd like to be able to turn a handle and have the water flow, then drain back down into a basin to be pumped through continuously if left on. but able to be shut off by simply turning the handle back to the off position.
- go to any gardening centre and just look at the pump packaging . most have basic instructions on back , then just improvise... or look at the magazines in there ther is bound to be some info
- Q:How to replace the basin hot and cold faucet hose
- And then connect the hot and cold water pipes, then wrench with a wrench, the water open, in the basin below the toilet paper or napkin to see if the water leakage, to determine the water leakage and then fixed a good head.
- Q:Kitchen faucet no hot water
- The water pipe may be blocked, it is recommended to twist down to check.
- Q:Xin Si Lai faucet wash basin with a little more on the faucet
- You said this brand but also three lines of the brand.
- Q:Hansgrohe basin basin with what basin
- , According to the material to points, can be divided into SUS304 stainless steel, cast iron, plastic, copper, alloy material faucet, polymer composite tap and other categories.
- Q:It stopped working out of no where so the only way i can use my kitchen sink is to use the hand held spreyer.. I have never replaced one before and wasnt sure if i need to turn off water to the whole house or not...
- if it has an aerator on the spout remove it and clean it,
- Q:Can the basin faucet hot and cold water pipe be replaced?
- First to the water of the total gate off, and then depends on what kind of faucet, and some in the wash basin under the screw twisted, so the first screw to twist first, there is a more ancient type is directly twist open The beginning of the faucet can be. The interface rust is difficult to remove: the bathroom faucet in the demolition, at least into the water pipe connection is easy to separate. The kitchen, whether it is the water inlet or faucet with the table connection, the two interfaces are difficult to unscrew.
- Q:How to handle the faucet handle at home?
- Home faucet handle can go to the nearby hardware store, cheap water jacket only 10 a few pieces, and then go home, off the sluice, looking for a new switch can be. The faucet is the popular title of the water valve, used to control the size of the water switch, there is water saving effect. The replacement of the faucet is very fast, from the development of old cast iron to the electroplating knob, and the development of stainless steel single temperature single control faucet, stainless steel dual temperature dual control faucet, kitchen semi-automatic faucet. Now, more and more consumers to buy taps, will be from the material, function, modeling and other aspects to consider.
- Q:Double trough vegetable bowl on the mouth of the mouth is not the size of the uniform? That is no matter what kind of faucet can be used?
- Are generally standard caliber, you also need soft connection tube, raw material belt.
- Q:I have a single basin faucet. How do I change it into a regular faucet without replacing it?
- Your saying you want a two handle hot and cold faucet. O.K. Buy one, put it in, over.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Y-Strainer With Ductile Iron Body With Stainless Steel
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 set
- Supply Capability:
- 10000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
