Easy Trim Reveals

Hot Products

FAQ

What solvent is used to clear the melted rubber layer?
The acetone extractives are some fatty acids and steroids, some natural antioxidants and accelerators, and can help with the powdery agent in the process of mixing and dispersion of rubber softening effect.Ash containing mainly magnesium phosphate and calcium phosphate salts, copper, manganese, iron and other metal compounds is very small, because these valence metal ion can promote the aging of rubber, so their content should be controlled.
What is rubber damping material?
Butyl rubber, butyl bromide and butyl chloride are the main ones!! Need to design, sell rubber products, can find me!
What's the difference between silicone products and rubber products?
In the name of the above, rubber products contain silicone products.
Process for producing rubber products
In the production process of rubber products, the process of making various shapes and sizes is made by using a calender or an extruder, which is called forming. Forming methods are1. rolling formingThe utility model is suitable for making simple sheet and plate shaped articles. It is a method of pressing compound rubber into a certain shape and a certain size of film by calender. It is called calendering forming. Some rubber products, such as tires, adhesive tape, hose and other textile fiber materials, must be coated with a thin layer of glue on the fiber, also known as glue or glue, the process of gluing is generally completed on the calender. Fiber material needs drying and dipping drying before calendering. The purpose is to reduce moisture content of fiber material, avoid evaporation and foaming, and increase the temperature of fiber material, so as to ensure the quality of calendering process. Dipping is a necessary process before cementing. The purpose is to improve the bonding property of fiber and rubber.2. extrusion moldingFor more complex rubber products, such as tyres, tread, hose, and wire surface coating, shall be made by extrusion molding. It is a method of continuous molding with a certain plastic compound into the extruder's hopper, the extrusion of the screw under the internal screw, and through a variety of dies, also known as the templates. Before extrusion, the material must be preheated to make the material soft and easy to extrude so as to obtain a smooth and accurate rubber product.3. moldingIt can also be used to make some rubber products with complex shapes, such as leather bowl and sealing ring. The rubber material is placed in the mold and shaped by heating.
What are the differences in the properties of neoprene models?
The appearance of white, yellow or light brown flakes or lumps, is chloroprene (2- chloro -1,3- butadiene) as the main raw material for the polymerization of alpha elastomer. The solubility parameter of chloroprene rubber accounts for Delta =9.2~9.41. Soluble in toluene, xylene, two ethyl chloride, three vanadium ethylene, slightly soluble in acetone, methyl ethyl ketone, ethyl acetate, insoluble in hexane, cyclohexane, Yu Zheng solvent gasoline, but soluble by appropriate proportion of good and poor solvent and non solvent or poor solvent and non solvent composition of the mixed solvent in plants oil and mineral oil and solvent swelling.
How should the rubber products be dirty?
Wipe rubber products with a soft cloth. The most important thing is to first rubber products surface adsorption of dirt off, and then in dry, you can.
How to enhance the performance of water resistant silicone rubber products
In general, silicone rubber is almost free from the influence of free steam and moisture without pressure. The same is true when the steam is under low or moderate pressure. However, as the vapor pressure rises, the impact on the mechanical properties of the rubber becomes larger. Therefore, silicone rubber is not recommended for long-term use in situations where steam is more than 50psi.
Excuse me, what is in the rubber rubber, glue them, what is the difference?
The toughness greatly improved than rubber glue. If the car tire is cooked. Generally the same thickness, soft as glue.