Electrical Conductivity Of Fiberglass

Hot Products

FAQ

What are the skills of hardfacing process for wear-resistant alloy powder blocks?
The hardfacing of wear-resistant alloy powder block is mostly made by carbon arc surfacing. General selection of graphite or carbon arc surfacing carbon rod and plate electrodes, which has good conductivity, high melting point;
The reason why graphite is used as electrode
Good chemical stabilityGraphite has good chemical stability at room temperature. It can resist acid, alkali and organic solvent.
What is the graphite furnace electrode with a diameter of 400?
The variety and specifications of graphite electrodes used in modern EAF steelmaking are mainly determined by the technical parameters of the steelmaking furnace.
Where is the graphite electrode scrap?
Finally, a bright white Ar-ICP discharge is formed, especially like a drop of water droplets.
Is graphite flammable?Why do I bake pencil cores with a fever that doesn't burn?
In anaerobic conditions, the ignition temperature is at least above 3000 degrees. There are many types of graphite, different types of ignition points, and the burning point of pyrolytic graphite...
Why is graphite conductive electrode oxidized?
Graphite electrode uses petroleum coke (carbon), pitch coke (carbon) as granule material
The use of graphite as an electrode in alumina electrolysis
Graphite acts as an electrode:The electrical conductivity of graphite, the electrode itself must be electrically conductive;When graphite acts as an anode, it acts as a reducing agent and displaces an element of aluminum in a chemical reaction;Graphite is cheap and cost saving.
What are the losses in graphite electrode?
In EDM, discharge principle is to remove the workpiece material by using the tool and the workpiece anode spark discharge explosion, spark discharge is bidirectional, not only will the workpiece removal part, forming processing, will cause some loss of electrode. Electrode loss is one of the main causes of machining errors in machining, and is an important technical parameter affecting the accuracy and quality of EDM