Exterior Textured Wall Coatings

Hot Products

Special coating for waterborne inorganic mineral bridge Inorganic coatings water-based coatings

Inorganic floor coatings Inorganic coatings Wholesale floor coatings

Negative-ion inorganic mineral coatings Inorganic paint for wholesale

Hardener Concrete sealing agent (lithium-based)

Anti-graffiti inorganic mineral coatings Inorganic coatings wholesale Water-based inorganic coatings

Two component composite waterproof coating made of organic liquid and inorganic powder

Environment-Friendly Exterior Wall Paint

Inorganic interior wall finishes Interior wall coatings Inorganic coatings wholesale

Interior wall coating, inorganic coating, inorganic interior wall primer

3TREES Anti-Mould Weathershield Acrylic Emulsion Paint

FAQ

Is the polymer cement - based waterproof coating required for inspection?

Are you a manufacturer or a construction unit? If it is the construction unit can generally be called the factory to give you the test report on the line on the line, but also to the scene sampling inspection.

What is the emulsion in the paint?

Synthetic resin is a high molecular compound and is produced by the combination of low molecular raw materials - monomers (such as ethylene, propylene, vinyl chloride, etc.) by polymerizing together into macromolecules. Industrial polymerization methods commonly used are bulk polymerization, suspension polymerization, emulsion polymerization, solution polymerization, slurry polymerization, gas phase polymerization and so on. Production of synthetic resin is rich in raw materials, is mainly to oil and natural gas products, such as ethylene, propylene, benzene, formaldehyde and urea.

How to distinguish between cell phone batteries and lithium batteries?

From the battery logo can be identified, lithium battery for Li, lithium-ion battery for Li-ion. Now, the use of laptop and mobile phone so-called "lithium battery", in fact, are lithium-ion battery. The basic structure of modern batteries, including positive, negative and electrolyte three elements.

Polymer cement waterproof coating reaction type and volatile type What is the difference

As the polyurethane is also a polymer, the ratio is also inorganic powder, and polyurethane curing is the reaction with the water and film, so called reactive polymer cement waterproof coating, is actually wrong.

How to paint the house exterior

Pressure wash and scrape/sand/brush any loose paint. Seal surface with a sealer designed to prime and seal chalked surfaces. Paint from top to bottom. These are just high level rules of thumb. Factors such as condition of existing paint, material (wood, siding, stucco, etc), location all play a part in determining the right solution. Best bet is to either clarify your question here with details that include the state, near salt or fresh water or no water, condition of the existing paint, the type of material the house is made of, etc. Or, take this information and an open mind to a local paint store. Cheap paint does not equate to a low cost job. Often times, cheap paint requires more coats than quality paint to cover the same area. You usually save time and money by buying as good a quality as you can afford.

I am the Epson R230 is now the dye with the supply, I heard that modified paint to play pictures for a long time, will not fade, I would like to ask how the modified paint, If the modified paint, is not only print photos? The color will not be better than the fuel effect, want to know the friend can tell you no time to add you next time

Dye ink and pigment ink the advantages and disadvantages of comparison: dye ink colorful, ink fluency, and cheap. The biggest drawback is easy to be outside the light, air humidity and other factors, especially the strong light is easy to fade photos, save time is not long. Pigment ink is not easy to fade, you can save for decades, little change in color. But the color of the printed picture is not satisfactory, always gives a contrast is not enough, there is a slightly dark feeling. And the ink price is very expensive, ink fluency is poor, easy to plug. Replace the pigment ink, the best replacement with the supply, do not use the original even for the supply. Because once the deal is not good, the risk of nozzle clogging is larger.

What is the difference between water-based paint and oily paint?

Before dilution with water is diluted with diluent, water is not compatible

Definition of crystalline polymers

General plastic crystal structure is composed of many linear, slender polymer compounds composed of aggregates, according to the degree of regular arrangement of molecules, known as the degree of crystallization (crystallinity), the polymer only part of the individual neatly arranged, so Crystalline resins are usually only partially crystalline. Crystalline polymer polymer regular arrangement of the region known as the crystal area, disorderly area called amorphous zone, the percentage of crystal area called the degree of crystallinity, the degree of polymer crystallinity changes a wide range, generally from 30% 80%. Divided into mass crystallinity and volume crystallinity.