Folding Trailer

Hot Products

FAQ

The ball of the universal milling and lifting platform rolls off, how to install,
Screw has a variety of forms, one of the most common is to use return and return two catheters, if not nut screw the screw will not drop the ball, if there is no turn the screw nut and fell out of the ball, that is to return or return pipe is broken, have to put on reload. Let me be specific. If there is no damage, then use the lithium base grease to keep the ball rolling in separate loops, and then turn the nut back in the way of the regular nut. The key is to start at the beginning, but once the ball comes out, it's going to come back again. Try it twice. (note the non-circular path (snails) don't let the ball drop!)
How to maintain the platform?
My company has, our brand: niu power Throughout guangdong, there are 57 dealers across the country. Check it online, it's ok to buy it, but at least it will give you advice and contrast!
There are several reasons for the hydraulic cylinder oil leak on the elevator
The sealing part of the seal is worn out to buy two oil seals according to oil cylinder model to change to be good also a few dollars
The design of graduation is designed for mobile shearing and hydraulic lift
Has offices in the major cities, buy convenient, jinan Long Hao hydraulic machinery is the main production: elevator, lift platform, lift platform, elevator, cllimbing trolley, hydraulic lift, hydraulic lift platform, hydraulic lifting platform, hydraulic lifts, hydraulic dock leveler, imobile elevator, stationary lift platform, fixed lifts, fixed lifts, stationary dock leveler, mobile lift, lift platform, lift platform, portable lifts, mobile cllimbing trolley, goods elevator, cargo-lifts, hydraulic cargo-lifts, stationary cargo-lifts
What is the phenomenon of the worker's transport of wood using a lift
It's normal. This series of products for indoor type, widely used in star-rated hotels, such as the large supermarket industry lobbies, the aerial work inside the factory, has a balance, convenient operation, can enter the hall, can freely in and out of the elevator and less consumption, no pollution, work does not hurt the earth, can be used for wall and out work, work no dead Angle. The single column aluminum alloy electric elevator is fitted with the gantry cross attachment, which is suitable for the maintenance of movie theater, synagogue and church. The long door is easy to assemble, easy to operate, flexible to move, can span up to 1.1m fixed seat and other obstacles, and can stabilize the work on the step. High strength rectangular steel pipe making, rigid and stable. It is equipped with multi-wheel and flexible. Both ends can be adjusted, which can be used to cross different obstacles. The two sides are vertical adjustable, which can be used for the incline or step of a certain incline
How does the elevator repair
All parts should be filled with lubricating oil to extend the life of the bearing. The oil and oil level of hydraulic oil. The platform rises all the way up, and in this position, the hydraulic pressure should be 40 to 50 mm above the bottom of the box. Hydraulic oil is a variation of dark, sticky or grit, such as a discovery should be replaced in time (32 # hydraulic oil) Annual maintenance A. check all the hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. C. the elevator hydraulic oil is put in the rejected, tighten the joint remove oil filter, after cleaning, use compressed air is clean, and then back into the tank, and the connecting line. (put on new oil and don't keep using the old oil. Otherwise, the moving parts in the system will accelerate the wear and tear.)
The home is decorated, make a tatami mat the platform should pay attention to what aspect?
The first is the choice of control. Usually tatami lifting column control mode are: pure manual type, electric type, manual and electric integration and so on three kinds of control modes, the future there will be mobile intelligent control. The pure manual type, which is to turn the crank, makes the lifting platform up and down. The advantage of this type of control is that even a blackout does not affect the use of the product. The disadvantage is that manual control is time-consuming and time-consuming.
What is the imported hydraulic platform car? Kneel and beg your help
Why buy the importation, the price is expensive not to say, the quality is not same good to go where. There is also a bad reputation in China, like we are using the sea god's platform