Hanging Chair From Ceiling

Hot Products

Suspension Ceiling Tee Grid-Galvanized Ceiling Grid

Suspension Ceiling Tee Grid-Ceiling System

Suspended Ceiling System Ceiling T Grid T Bar

Drop ceiling grids metal ceiling grid from CNBM

Plain Ceiling T Grid Flat Ceiling System T15 T24 Ceiling Grid

Gypsum Board T-Grid T Bar for Ceiling Suspension Groove Wall Angle Ceiling T-Grid

ceiling T bar t runner cheap drop ceiling grid

Suspended ceiling grids drop ceiling grid prices

Suspension Ceiling Tee Grid-Metal Ceiling Grid

Suspension Ceiling Tee Grid for Acoustic Ceiling

FAQ

Light steel keel gypsum board ceiling or aluminum-plastic plate ceiling good?

Which depends on where to use, the public places office aluminum-plastic plate is good, good family gypsum board, aluminum plate high cost.

Light steel keel can stand people?

Prerequisite for the upper type of ceiling can be placed in the main keel above the board of wood

Will the light steel keel and wood keel between what can be connected

Gas nail gun 30 on the line

I have a manufactured home and trying to finish the basement. I am stuck on how to install a ceiling being there are steel beams instead of wood therefor nothing to attach a grid to. Any ideas or anybody ever done this before?

you could buy screws with a drill point and a hex head.attach with these to the metal beams drop down enough to clear obstacles support grid with wire hung from screws

How many millimeters are the main keel spacing during the construction of the lightweight steel keel ceiling?

The spacing of the main keel is based on the hanging bar, the conventional hanging bar spacing is 1 meter, but the actual specification is between 0.8-1.2, the distance between the keel is 0.4 × 0.6, 0.3 × 1.2 pitch, the specification requirement is to double Keel, if you want to consider the master, with the smallest spacing and can be considered local reinforcement.

We have a drop ceiling but rather large holes for the many light fixtures (at least 20, like a grid of light bulbs as decoration) in our basement. The holes are about 2 inches in diameter and the light bulb doesn't fill up the holes completely. Is it safe to live down here without removing the insulation?

It's not clear from your description if you have recessed lights or not. Recessed lights can have an IC rating meaning you can put insulation right next to or over the recessed lights (IC stands for insulation contact). If the recessed lights aren't IC rated, then you have to leave a gap of 3 between the fixture and the insulation. Regardless of the above, you can always switch to compact fluorescent or LED bulbs which will generate far less heat for a given amount of light.

Do you want to install light steel keel

The kitchen should not be very big, you say the aluminum plate is a square or long? The use of light steel keel is nothing more than the main dragon and boom, the other does not need light steel keel, what do not know in asking me,

Can you stay There is no good way, neither affect the wall load does not affect the beautiful situation to solve the problem.

First estimate that you are using light steel keel plus gypsum board. If the general 3 below the indoor unit is no problem. Even if the use of wood keel is no problem. But you better in the keel where the fixed indoor unit because the gypsum board load-bearing in general 20-30 kg.Once there will be hidden.