Mic 6 Aluminum Plate Flatness

Hot Products

FAQ

Should the surface of the plastic film be removed when the activated carbon is used?
If it is a small bag of activated carbon, there is no need to remove the outside bag, directly scattered every small bag at home.
How many days can the concrete be taken away from the concrete?
Plastic film maintenance refers to the plastic film Wei cover to separate the concrete and air, the water is not evaporated, cement concrete in the water to complete hydration, has reached condensation, hardening. This method can be directly covered in plastic draft on the surface of concrete, or plastic sprayed on the surface of emulsion concrete, until the emulsion of volatile, with a layer of plastic film on the surface of the concrete, in order to make the concrete component isolated from the air to the concrete moisture evaporation and no hydration complete the function. Spray plastic film maintenance is 28d concrete strength low around 8%, because the film is thin, can not be completely separated, frozen adiabatic effect, so in the summer of this method is to add sunscreen facilities (not less than 24h), or will lead to concrete cracks producing filamentous. Generally speaking, the cost of natural maintenance is low, the effect is good, but the maintenance period is long. In order to shorten the curing period, increase the turnover rate of the template and the utilization rate of the site, it is suitable for heating maintenance in general production of prefabricated components.
Keyboard circuit board, film paper and rubber strip, how is it installed?
The rubber strip is pressed on the outside of the film. Generally, the rubber strip is placed on the cover, then the membrane is placed, and then the circuit board is inserted. Then the screw is screwed down to the circuit board, so that it is compressed.
What are the kinds of plastic films?
HDPE films, such as ultra-thin films, handbags, lining bags, food bags, etc.;
What's the packing material for yogurt? Plastic bags, then what plastic film, and can not use carton packaging?
Yogurt packaging materials are film, paper, multilayer composite materials, plastic bags are mainly PE, PP, PVC, etc., can be packed in cartons.
Is there any material in the strong film made of plastic material which is resistant to high temperature, piercing, and has high tensile properties and can not tear off the film?
High temperature resistance, piercing resistance, and high tensile properties, tear, all these properties of the film should be LLDE film.
Is it possible to lay a plastic film between the roof slab and concrete for waterproofing purposes?
It is recommended that the precast slab be first poured with a diameter of 4mm or more, 200 spacing, two-way C20 fine stone concrete, 40mm thick, and then do waterproof two road, a little bit better insulation layer, and then make surface layer protection.
Is the film capacitor CBB capacitor?
The film capacitor is not necessarily a CBB capacitor, but the CBB capacitor must be a film capacitor. Because the film capacitor contains other capacitors such as CL21