Stainless Steel Ap

Hot Products

Corundum Bricks for Industrial Kilns

Coal Chemical Industry Refractory Chromecorundum Brick

Corundum Insulating Fire Bricks High Bulk Density for Hot Surface Lining Furnance

Furnace Lining Refractory Firebrick Corundumchrome Brick

Corundum Insulating Fire Bricks and Low AP Mullite for Hot Surface Lining Steel Furnace

Corundum Brick，Corundum Fire Brick，Bonded Materials

Factory of Corundum Mullite BricksRefractory Bricks

Refractory Corundum Brick for Rolling Mill Furnace Use

High Purity Corundum Refractory Bricks

99% Al2O3 Corundum Brick Used in Linings of Ovens of Petrochemical

FAQ

What is the blast furnace ceramic cup called by the refractory factory?

The refractory bricks, which are suitable for blast furnace conditions, are vitrified by high temperature sintering. They are like a huge cup, so they are called ceramic cups. The name was taken by the French, and the technology was handed down from france!

What kind of fused corundum corundum brick should be used for each part of the glass furnace?

The compact microstructure of AZS33# zirconia corundum brick makes the bricks resistant to glass liquid corrosion, and it is difficult to produce stone or other defects in the glass kiln. It is the most widely used product in the glass furnace. It is mainly applied to the upper structure of the melting pool, the wall brick of the working pool and the paving brick, the material way, etc..

Expansion ratio of lightweight corundum refractory bricks

Now with the production of lightweight foam corundum brick, basically still meters with molding casting, moulding after together with die in the drying room drying in 60~70 C 4 days of release, then the appropriate drying, finally after 1300 and 1550 C firing, the total burning time: 50~60h. Light corundum brick after firing is usually not the size and shape of accurate, so that products after the kiln to mechanical or manual cutting, can be made into a density of 0.8 - 1.3g/cm3, 4MPa compressive strength and porosity, the thermal conductivity of 70%~80% 0.17W/ (M - K), light-weight corundum brick use temperature of 1500~1700 DEG C.

Can the PE sintering plate dust collector be suitable for dust removal in the coking plant?

Do not know where the coking plant do dust treatment, processing conditions are different, the dust collector is not the same

Wave tile and throwing glaze, tile which good?

Vitreous tile is all ceramic tile, the material is hard, strong wear resistance, smooth finish is very good, in general, looks very bright. Microcrystalline brick, corundum brick Market said, they really mean bohuazhuan. Because of its low water absorption and high strength and hardness, glazed tile has been widely used. Many hotels, shopping malls and office space are widely used glass tile.

What are the main constituents of refractory bricks?

High alumina refractory brick, high alumina refractory brick mineral composition for corundum, mullite and glass phase, its content depends on AL2O3/, SiO2 ratio, as well as the kind and amount of impurities, AL2O3 content can be divided into refractory brick grade. The raw materials are high alumina and sillimanite natural ore. They are also made of fused alumina, sintered alumina, synthetic mullite and calcined alumina in different proportions with clay. It is produced by sintering process. But the products are casting brick, brick, brick fused grain and unshaped refractory brick. High alumina refractory brick is widely used in iron and steel industry, non-ferrous metal industry and other industries.

What equipment is used for producing diamond blanks? How much is the investment?

Plus all the cables fifty thousand. Steel 10000 yuan. Corundum bricks; insulating bricks; clay bricks, these three require more than ten thousand. The electrode is about one hundred thousand. It's just an investment in an electric furnace. Together with the rear section processing and raw materials need hundreds of thousands of.

What can zirconium sponge do for those industries?

Uses: aerospace, military, nuclear reactions, atomic energy, and metal superhard materials, the manufacture of bulletproof alloy steel, can also be used in the reactor uranium fuel coating alloy; zirconium at high temperatures easy to launch electronicProduct characteristics: zirconium metal has very strong corrosion resistance, ultra high hardness and strength