Stainless Steel Density

Hot Products

FAQ

Calcium silicate board sticky rock wool sandwich sandwich board what glue stick to live?
This problem is very good solution, ah, with MPU-20-type one-component polyurethane adhesive can be bonded.
How to distinguish between the color of calcium silicate board is good or bad
Identification of calcium silicate board with fire: Calcium silicate board is a fire board, so the direct use of a well-burned plate, then there is no role. Before the fire must use the way to get the plate, pay attention, do not directly use the saws saw, if it is thin, hand directly snapped, if it is thick plate, use the hammer to break it. After the break, you will send now cross-section inside covered with small lines, these small lines or that is asbestos, or that is the plant fiber, if it is asbestos, then burned after the announcement will affect the burning smell, If it is plant fiber, then burned after the paper will announce the taste of burning. A smell can easily distinguish this calcium silicate board is not rich in asbestos.
Is the calcium silicate board and the Etter plate the same material?
In the ordinary use of the partition wall is not very different. Gypsum board can be used, not to mention the fiber cement board. In addition, Etienne has a high-grade fiber cement sheet with finishes that are unique.
Mineral wool board, silicon calcium board, aluminum slab plate is what is the difference between the use of the place, the more detailed the better.
Mineral wool board and silicon calcium board with mineral wool and silicon calcium powder produced, relatively heavy, aluminum plate is made of aluminum.
Does the apartment use silicon calcium board to make the wall right?
Because silicate to change the plate are containing quartz components, and the content is still high. Quartz is a carcinogen, long-term under the influence of this material, the human body will greatly enhance the chance of cancer
What is the difference between gypsum board and silicon calcium board?
Gypsum board is a building gypsum (that is, CaSO4) as the main raw material, mixed with appropriate amount of additives (adjust the rate of condensation) and fiber to do plate core, with a special plate for the face, the processing of the plate. Strength is not high, not wet
Will the calcium silicate board shrink when it is finished or finished?
Calcium silicate board water absorption rate of about 20%, when the temperature difference is large, prone to deformation that occurs drum phenomenon.
Perforated calcium silicate board What is the meaning of sound absorption wall
Similar to the acoustics of this material will be mainly in the high and low three kinds of audio produce a different effect, the industry is more professional in Jiangsu Sanxian acoustic company, hoping to adopt