Stainless Steel Flue Pipe

Hot Products

FAQ

FRP acceptance standard
Check radial deflection values. In accordance with the requirements of the specification, the FRP pipe installation shall be completed within 24h, the initial radial deflection of the pipe shall be tested, and the pipe shall not be raised, flattened or otherwise mutated.
Excuse me, what standard does the glass fiber that check mechanical and electrical use accord with GB?
It is a resin based glass fiber weight layer wound on the mandrel rotating on according to process requirements, and distance evenly between the fibers as Kamiishi Eisa in the sand layer.
Which is better, PVC pipe and GRP pipe?!
Depends on location, and design requirements. Nowadays FRP is in the majority.
What qualifications do FRP pipes need to export to Australia?
Large enterprises have an international quality system that can be consulted by local customs clearance agents. The company must be combined with local regulations to be taken care of
What's the difference between glass fiber reinforced plastic pipe and glass fiber reinforced sand pipe?
Glass reinforced plastic sand pipe is actually in the production of glass fiber reinforced plastic pipe, in the middle to increase a layer of sand layer, the purpose is to increase the rigidity of the pipeline. The pipeline in the design according to the use of pressure, stiffness and other conditions to determine the need for sand, if the thickness of the pipe can satisfy the pressure requirements and can meet the requirement of stiffness, is generally not the sand.
What is the elastic modulus of glass fiber reinforced plastic?
Glass fiber reinforced plastic is another name for glass fiber reinforced plastics, commonly known as FRP (Fiber Reinforced Plastics), that is, fiber reinforced composite plastic. Depending on the fiber used, glass fiber reinforced plastics (GFRP), carbon fiber reinforced plastic (CFRP), boron fiber reinforced composite plastics and so on are classified. It is a kind of composite material made of glass fiber and its products (glass cloth, band, felt, yarn, etc.) as reinforcing material and synthetic resin as base material. Fiber reinforced composites are composed of reinforced fibers and matrix. Fiber (or whisker) diameter is very small, generally below 10 mu m, less defects and smaller, fracture strain of about 30/1000, is brittle material, easy to damage, fracture and corrosion. The matrix is much lower in strength and modulus than fiber, but it can withstand large strains, often with viscoelasticity and elasticity, and is a ductile material.
Is the installation of FRP pipes required qualification?
However, some industries may have corresponding requirements, and some owners may also require it. For example, apply fiberglass pipes to shipyards
Winding method of glass fibre reinforced plastic pipeline anticorrosive glass fiber cloth
When the length and width of glass fiber mesh are not enough, the method of lap joint must be adopted to improve the tangential bearing capacity of the joint, so as to effectively overcome the radial tensile stress, bending force and bending shear stress. The lap length of the glass fiber cloth at the joint is generally 50 to 100mm, and the joint of each glass fiber cloth should be at a certain distance from the adjacent joint. The longitudinal and transverse joints between adjacent layers shall be greater than 300mm, and the distance from the same seam shall not be less than 500mm.5) paste made of circular duct, glass cloth along the radial 45 degree angle to the direction of cut cloth; conical paste products, according to the fan-shaped cloth.