7013 Angular contact ball bearings bearing
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 500000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Sepcification:
Angular contact ball bearings can bear radial load and axial load at the same time and also can bear pure axial load. Their ability of axial load is determined by contact angle and is increased with contact angle increasing; speed limit is higher; stiffness is big and can be pre-adjusted. They are applicable to high-speed and high-precision site.
Product application:
- spindle and other high speed precision mechanical spindle
- aircraft engine spindle
- high frequency motor
- printing machinery
- air compressor
- gas turbine
- jet engines
- turbines
-pump
| Design ations | Principal dimensions (mm) | 〆15º | 〆25º | ||||
| Limit speed | Limit speed | ||||||
| d | D | B | Basic load rating | Lubrication | Rated load | Lubrication | |
| Cr Cor | Grease Oil | Cr Cor | Grease Oil | ||||
| 70 Series single angular contact ball bearings | |||||||
| 7003 | 17 | 35 | 10 | 6.7 4.9 | 44000 66000 | 6.4 4.7 | 39000 59000 |
| 7004 | 20 | 42 | 12 | 9.6 6.3 | 37000 55000 | 9.2 6.0 | 33000 49000 |
| 7005 | 25 | 47 | 12 | 12.9 8.7 | 33000 49000 | 12.3 | 29000 44000 |
| 7006 | 30 | 55 | 13 | 15.7 11.6 | 27000 42000 | 14.9 10.9 | 23000 37000 |
| 7007 | 35 | 62 | 14 | 19.3 17.5 | 19000 33000 | 10.4 10.3 | 19000 33000 |
| 7008 | 40 | 68 | 15 | 19.9 19.1 | 18000 31000 | 18.9 18.2 | 16000 27000 |
| 7009 | 45 | 75 | 16 | 26.7 25.3 | 16000 27000 | 25.4 24.1 | 15000 25000 |
| 7010 | 50 | 80 | 16 | 27.6 27.5 | 15000 25000 | 26.2 26.2 | 14000 23000 |
| 7011 | 55 | 90 | 18 | 36.7 37.1 | 13000 21000 | 34.8 35.3 | 12000 19000 |
| 7012 | 60 | 95 | 18 | 37.8 | 13000 21000 | 35.8 38.0 | 11000 18000 |
| 7013 | 65 | 100 | 18 | 38.9 42.9 | 12000 19000 | 36.8 40.7 | 10000 17000 |
| 7014 | 70 | 110 | 20 | 49.9 55.5 | 11000 18000 | 47.2 52.7 | 9000 16000 |
| 7015 | 75 | 115 | 20 | 51.3 59.2 | 10000 17000 | 48.5 56.2 | 8500 15000 |
| 7016 | 80 | 125 | 22 | 61.6 70.4 | 9000 16000 | 58.3 66.9 | 8000 14000 |
| 7017 | 85 | 130 | 22 | 63.6 | 8500 15000 | 59.9 71.3 | 7500 13000 |
| 7018 | 90 | 140 | 24 | 66.9 | 8000 14000 | 63.2 79.7 | 7000 12000 |
| 7019 | 95 | 145 | 24 | 79.1 97.6 | 7500 13000 | 74.8 | 6500 11000 |
| 7020 | 100 | 150 | 24 | 81.2 103.3 | 7000 12000 | 76.7 | 6000 10000 |
| 7021 | 105 | 160 | 26 | 93.9 118.2 | 6500 11000 | 88.8 | 6000 10000 |
| 7022 | 110 | 170 | 28 | 110.4 139.8 | 6000 10000 | 104.4 132.8 | 5700 9000 |
| 7024 | 120 | 180 | 28 | 112.7 148.7 | 6000 10000 | 106.3 141.1 | 5700 9000 |
| 7026 | 130 | 200 | 33 | 144.8 190.8 | 5700 9000 | 136.8 181.0 | 5000 8000 |
| 7028 | 140 | 210 | 33 | 148.7 202.6 | 5000 8000 | 140.4 192.2 | 4600 7500 |
| 7030 | 150 | 225 | 35 | 168.4 232.5 | 4600 7500 | 159.1 220.6 | 4000 6500 |
| 7032 | 160 | 240 | 38 | 189.1 264.5 | 4000 6500 | 178.6 251.0 | 3800 6000 |
| 7034 | 170 | 260 | 42 | 205.6 299.3 | 3800 6000 | 194.2 284.0 | 3300 5300 |
| 7036 | 180 | 280 | 46 | 229.5 352.1 | 3500 5700 | 216.8 334.1 | 3000 5000 |
- Q:What are the reasons for the use of tapered roller bearings and angular contact ball bearings?
- Selection of bearings in accordance with the theory and practice of judgment, that is, bearing capacity and the form of movement and load factors are different. That is, the role of the two bearings
- Q:Do angular contact ball bearings come with a sealing cap?
- Angular contact ball bearings generally have no dust caps or seals. You can design and install an oil seal or something like that.In general, deep groove ball bearings are lubricated with dust cover. Angular contact ball games are generally lubricated with lubricating oil, without dust cover, such as grease lubrication, the effect is poor.
- Q:The difference between ultra high speed angular contact ball bearings and other plain bearings
- Yue bearing features:1. low heating and high speed.X products 2. using heat and friction wear is made of SHX material production, to realize high speed and long life.3., according to different uses, established a different contact angle and ball material specifications of the powerful lineup.4., with wide sealing ring, compared with open bearings, grease life increased to 1.7 times, to achieve a long life.Compared with plain bearings, plain bearings only play the role of reducing the friction coefficient in the power transmission process and keeping the center of the shaft fixed when the parts on the shaft produce relative motion with each other. Low wear resistance, short life, performance is far less than ultra-high speed angular contact ball bearings, but considering the price, the average bearing price may be lower.
- Q:What is angular contact ball bearing contact angle?
- Angular contact ball bearings can simultaneously bear axial force and radial force in one direction. The rolling force of upper and lower points of attachment at a certain angle and radial direction. Such bearings are angular contact bearings.
- Q:What are the differences between angular contact bearings AC and A and C?
- Angular contact bearings common suffix has AC, C and B, AC said nominal contact angle a is 25 degrees, C is 15 degrees, B is 40 degrees.
- Q:How to install angular contact ball bearings?
- The installation of angular contact ball bearings is more complicated than deep groove ball bearings. It is mostly installed in pairs, and preload is necessary. Well installed, can make the host work accuracy, bearing life greatly improved; otherwise, not only the accuracy can not meet the requirements, the life will be affected.The installation form of angular contact ball bearings, a series of face to face and back to back, three. (two back-to-back wide end bearing relative) installation, bearing contact angle line along the axis of rotation diffusion direction, bearing angle can increase the radial and axial rigidity, maximum deformation resistance; face to face (two relatively narrow end bearing) installation, bearing contact angle of the rotary axis line towards the direction of its convergence. To the point of less rigidity. Because of the inner ring of the bearing outer ring out, when pressing the outer ring two bearing together, the original gap ring is eliminated, can increase the bearing preload; tandem arrangement (two wide end bearing in one direction) when installing the bearing contact angle and parallel lines in the same direction, the two share the same bearing the direction of the work load. However, in order to ensure the axial stability of the installation, the two pairs of bearings arranged in series must be installed opposite the ends of the shaft in order to ensure the axial stability of the installation.
- Q:How many angles are there in angular contact ball bearings? How many degrees are they?
- A stands for 30 degrees, A5 stands for 25 degrees, B stands for 40 degrees, and C stands for 15 degreesThe new Seiko NSK serves you!
- Q:What is the difference between deep groove ball bearings and angular contact ball bearings?
- The above two said performance, actually because the contact angle is different, the original contact angle of deep groove ball bearing is 0 degrees. Contact angle of angular contact is greater than 0 degrees, generally 15 degrees. 25 degrees. 40 degrees. Thrust angle contact bearings greater than 45 degrees.The consequences of angular contact, as above two said.
- Q:What does angular contact ball bearing 70216AC mean?
- 7--- angular contact ball bearing0--- normal width series2--- diameter series code, which means light series16--- internal diameter code indicating the inner diameter of 16*5=80mmAC--- internal structure code indicating the nominal contact angle of angular contact bearing is 25 degrees
- Q:Is there a way to calculate the axial force of angular contact ball bearings?
- The rated axial dynamic load of the bearing is: 4300N. Axial force can be calculated by formula. Please consult the professional manual!
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
7013 Angular contact ball bearings bearing
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 500000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
