AC LED LIGHT ENGINE-80W - IC ON BOARD LED
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 50000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
80W LED LIGHT ENGINE IC ON BOARD LED
80W LED Light engine for Highbay light, AC LED technology, driverless.
INPUT AC POWER DIRECTLY 100V TO 240V
Advantage
l High quality Aluminmu PCB.
l Using IC on board ACLED light source, driverless design.
l Using high quality electrical parts and SMD LED, high efficiency.
l Glaring free design.
l 3 years warranty
lLifetime more than 35000 hours
l3 years warranty
lEnergy saving up to 60% to 70%.
Specification:
Widely application - for highbay, flood lights and retrofit light sources.
Application for highbay light
SLG06-220/80 product size 80W
Light engine 180W 90lm/W CRI>80Ra, 80W 95lm/W
Lighting Distribution Curve:
Warning:
Don’t power on this product before it is properly installed
Don’t cover this product by anything.
Don’t dis-assemble this product, unless by professional people.
No pro-notice for updating.
Product specifications are subject to change please refer to the latest edition.
Our services
1.ODM & OEM
2. High and stable quality LED lights
3. Lighting design solution.
4. Logistics coordination.
5. Credit 30 days to 60 days.
6. Customize light design
7. ACLED technology sharing
- Q:How can the quality of the LED module be resolved? How can we choose the right manufacturer?
- See if the lights are evenOhmmeter test current size (this is very important)How many cores are used for wire rods?How does the touch degree of heatUse a few resistors (if the full color module is to see if there is a two stage triode)There are no loopholes in waterproof glue dropsWhat is the quality of solder joints?
- Q:Looking for LED module manufacturers. Specifications are as follows: P10 outdoor full-color module 32x16, the number of 150,
- Outdoor is generally 16*16, 32*16 rarely do
- Q:How does the LED module calculate the configuration power of the J?
- If the module is more than 25 groups, should be separately connected by high quality copper wire is greater than 1.5 mm in parallel connected to the light box body, power line length should be as short as possible, such as more than 3 meters should be appropriate to increase the line diameter, without connection to avoid module terminal short circuit must be cut and paste we must firmly, if necessary by self tapping screws fixed waterproof series for outdoor use, must be waterproof groove word
- Q:When stitching the LED screen with a LED module, do you have to use the same specifications as the LED module? Can you assemble the LED module with the same pixel spacing but different sizes, because there are some other uses?. For example, the 1 100*100 size modules and 2 50*50 modules are spliced into a 150*150 display.If the custom interface and control card are not implemented?
- No, the interface is different. The same card does not control. If you display the area independently, you must add a control card alone,
- Q:How many specifications are there in the patch LED module?
- SMD patches are generally divided into:3020/3528/5050/3014 et al - these are positive glowing;0603/0805/1016/1024, etc. - these are side glowing light sources.The power has 0.06W, 0.2W, 0.3W, 0.5W, 1W and so on.
- Q:When the LED module heats up, to what extent does it affect the LED lamp, especially the life impact?
- CREE a series of white LED, manufacturers nominal temperature is not greater than 85 degrees, the light source life of not less than 50000 hours, can be understood as manufacturers recommend that the temperature is not more than 85 degrees. Technical parameters indicate that the thermal resistance of LED /W 8.5 degrees, the working voltage of 350mA 3.2V, from the chip temperature for 8.5*0.35*3.2=9.52 degrees centigrade heat sink thermal resistance, and welding, light source module in the recommendations of the LED electrode position of solder joint temperature is not more than 85-10=75 DEG C. Of course, this is to consider the extreme circumstances, usually in doing the lamp when you want to leave a relatively large margin of safety
- Q:What is the temperature tolerance of the LED module?
- You can check the LED parameter manual you use. The maximum allowable junction temperature is 120 degrees C. Then look at the thermal resistance of the package, then the maximum allowable temperature for the LED pin is 120-Rja*P, where Rja is thermal resistance.
- Q:What is LED modular design?
- I understand that multiple individual LED, either in series or in parallel or in series and in combination, form a unit, and that multiple units can form other independent products or major components
- Q:Classification of LED modules
- According to the variety of colors can be divided into monochrome, color, full-color single point of control of three, is a single monochromatic color module, there are red, green, yellow, white and so on is more commonly used; colorful LED module is module products transform from seven different colors, the color more and more changes; compared with colorful full-color LED module is more abundant, it can realize the true color changes, not only beautiful, but also dynamic, can also attract people's eyeball.
- Q:What's the difference between the LED module and the LED dot matrix? Is it the same?
- The LED module arranges the LED lights on a circuit board in a certain order and adds a card slot to the outside
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
AC LED LIGHT ENGINE-80W - IC ON BOARD LED
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 50000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords