China Graphite Electrode for EAF Furnace with Very Good Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 15 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Quality Graphite Electrode For EAF Furnace
Packaging Details:
1: Wooden crates with steel straps; wooden crates treated with "IPPC" label
2: standard export fumigated wooden box with steel strip fixed outside
3: In wooden case, each nipple must be packed in cardboard box.
Each electrode and nipple to preset at one end. The head of the preset nipple shall be covered by cardboard cap supported by wooden plate from both ends to avoid damage to the threads during transportation
Delivery Detail: 15-45 days after confirming the contract
Production Description:
Graphite electrode is made from the domestic first petroleum coke and high quality needle coke and widely used in the electric arc furnaces for production of alloy steels, metal and other nonmetallic materials, etc. The graphite electrodes include regular power, high power, super high power, ultra high power and square electrode. The range of diameters covers from 200mm to 700mm. Our products own the following characteristics: low electric resistance, good electric and thermal conductivity, high oxidation resistance, greater resistance to thermal and mechanical shock, high mechanical strength, high machining accuracy.
Physical and chemical index
Item | Unit | Nominal Diameter(mm) | |||
YB/T4088-2000 Industry Standard | Typical Values | ||||
300-400 | 450-550 | 350-550 | |||
Resistance | Electrode | ohm | ≤6.2 | ≤6.5 | 4.6-6.2 |
Nipple | ≤5.5 | ≤5.5 | 3.5-4.5 | ||
Bending Strength | Electrode | Mpa | ≥10.5 | ≥10.0 | ≥11.0 |
Nipple | ≥16.0 | ≥16.0 | ≥18.0 | ||
Elastic Modulus | Electrode | Gpa | ≤14.0 | ≤14.0 | ≤13.0 |
Nipple | ≤18.0 | ≤18.0 | ≤17.0 | ||
Density | Electrode | g/cm3 | ≥1.65 | ≥1.64 | 1.65-1.72 |
Nipple | ≥1.72 | ≥1.70 | 1.75-1.82 | ||
Ash content | Electrode | % | ≤0.3 | ≤0.3 | ≤0.3 |
Nipple | |||||
CTE(100-600) | Electrode | 10-6/C | ≤1.5 | ≤1.5 | 1.20-1.40 |
Nipple | ≤1.4 | ≤1.4 | 1.10-1.30 | ||
- Q:What is the reason that the current cannot be increased when the graphite electrode is used for anode electrolysis?Add calcium chloride and sodium bicarbonate into electrolytic water
- The reason is that the resistance increases continuously, the number of ions is limited, and the conductivity is limited
- Q:The reason why graphite is used as electrode
- Graphite is good in plasticity and easier to be machined preciselyGraphite material has the advantages of high processing accuracy and good surface effect, especially in the processing of precise, complex, thin-walled and Gao Ying material mold cavity. Because the cutting resistance of graphite is only 1/5 of copper material, it is easier to do manual grinding and polishing on the operation. There is no burr after graphite processing, and it is easier to realize automatic production. Complex geometric modeling can be realized.
- Q:Graphite is made of high-strength graphite, it is a kind of graphite grade specification.
- Graphite rod refers to graphite rod without processing. A graphite electrode refers to a finished product.
- Q:Why should graphite paper be placed between the heater and the graphite electrode?
- Determine the thickness of the graphite bowl, the thickness of the graphite bowl is generally 3 mm -6 mm, three, determine the diameter of the heater, according to the diameter of the crucible and the thickness of the graphite bowl, calculate the inner diameter of the heater. The gap in the quartz crucible diameter phi = +2 times is +2 times the wall thickness of stone bowl bowl and graphite heater if the graphite bowl wall thickness is a, graphite bowl gap and heater for B (b=5 mm), phi = Phi Phi +2a+2b= within the outer crucible outer crucible +2 (a+b) four, to determine the effective heater the height after practice, the effective length of the quartz crucible heater is high 1.6 to 1.8 times.
- Q:Graphite graphite graphite graphite electrode what is the use?
- The graphite electrode can be divided into artificial graphite electrode and natural graphite, artificial graphite electrode is the main raw material of petroleum coke and pitch coke, made after graphitization process of the natural graphite electrode is better than that of artificial graphite electrode, and does not require the graphitization process is complex, it can save energy, therefore, natural graphite electrode the rapid development in recent years.
- Q:How much does a graphite electrode cost about a ton?
- According to purity and quality, the price is 1-6 tons / tonDo not calculate the processing cost
- Q:What is the difference between SGL graphite electrode and graphite electrode in general?
- Pure graphite is a kind of high-purity graphite. The processing technology of fine graphite and high purity graphite is basically the same, that is, the purity of graphite is different, the purity is higher, and the particle size is basically the same
- Q:What are the factors that affect the electrode wear rate of machine tools?
- Influence of pulse interval on electrode wear. When the pulse interval is large, the electrode loss increases, which is due to the deterioration of the thermal effect condition and the damage of the "covering effect".
- Q:The graphite electrode made by the machining center adopts cooling method, which is water cooled, oil cooled and blow cold. Which is good?
- I had worked on graphite electrodes for 3 years before, and the fact told me that in addition to using the wind to remove the powder, the others were ineffective or disorderly. Because you have to measure size while processing.
- Q:Graphitized coke, graphite, broken, mixed up, how to export?
- Graphite electrode pieces in different data definition of graphite scrap is different, some data and literature of the graphite particles are called not great pieces of graphite (such as graphite) and some say that graphite products have a certain size, into a block of graphite broken, we are here to say Shi Mosui is second, often called as the graphite block. The production of graphite from graphite products, graphitization and machining process. Graphite waste used as an additive and as a conductive material in the steelmaking and casting industries.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
China Graphite Electrode for EAF Furnace with Very Good Quality
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 15 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
