Graphite Electrodes UHP with Nipples for Electric Arc Furnace
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Graphite Electrodes UHP with Nipples for Electric Arc Furnace
1.Diameter: 200 to 700mm
2.Length: 1600 to 2400mm
3.Nipple:3-4TPI
Graphite Electrodes UHP with Nipples for Electric Arc Furnace
1. Grade: RP, HP, UHP, SHP, RPI
2. Diameter: 200 to 700mm at your choice.
3. Length: 1600 to 2400mm at your choice.
4. Nipple: 3-4 TPI
5. Fine mechanical strength and machining quality, low specific resistance, high temperature and oxidation resistance
6. Low price and timely delivery.
Feature
Graphite Electrodes UHP with Nipples for Electric Arc Furnace
Grades: RP, RPI, HP, SHP, UHP
All graphite electrodes are offered with tapered nipples, i.e. 3 or 4 threads per inch, and meet the internationally accepted tolerances as per NEMA CG 1/ IEC 60239 / JIS R7201 standards.
UHP
Physical and chemical index
Item | Unit | Nominal Diameter(mm) | |||
YB/T4088-2000 | Typical Values | ||||
Industry Standard | |||||
300-400 | 450-550 | 350-550 | |||
Resistance | Electrode | ohm | ≤6.2 | ≤6.5 | 4.6-6.2 |
Nipple | ≤5.5 | ≤5.5 | 3.5-4.5 | ||
Bending Strength | Electrode | Mpa | ≥10.5 | ≥10.0 | ≥11.0 |
Nipple | ≥16.0 | ≥16.0 | ≥18.0 | ||
Elastic Modulus | Electrode | Gpa | ≤14.0 | ≤14.0 | ≤13.0 |
Nipple | ≤18.0 | ≤18.0 | ≤17.0 | ||
Density | Electrode | g/cm3 | ≥1.65 | ≥1.64 | 1.65-1.72 |
Nipple | ≥1.72 | ≥1.70 | 1.75-1.82 | ||
Ash content | Electrode | % | ≤0.3 | ≤0.3 | ≤0.3 |
Nipple | |||||
CTE(100-600) | Electrode | 10-6/C | ≤1.5 | ≤1.5 | 1.20-1.40 |
Nipple | ≤1.4 | ≤1.4 | 1.10-1.30 | ||
Image
Graphite Electrodes UHP with Nipples for Electric Arc Furnace
FAQ:
Graphite Electrodes UHP with Nipples for Electric Arc Furnace
1. Why it is essential to select electrode carefully for each particular furnace?
The primary factor is the maximum current intensity of the furnace. However, other conditions should also be considered, such as the characteristics of the furnace, type of charge, tap to tap time, oxygen blowing, mechanical requirement, furnace regulation, etc.Generally, specifications for electrodes of most grades have been standardized. Variation of physical characteristics with temperature, however, should be taken into account whenever using the electrodes.
Precautions to the use of graphite electrodes
2. Why it is essential to not to fit electrodes and nipples made by different manufacturers together?
The capacities of the furnace and the transformer determine whether the grade and diameter of the electrode are suitable to the furnace or not.
In order to prevent the electrode column from being hit by the collapsed furnace loads, large and heavy scraps should be loaded onto the bottom of the furnace. Do not put significant quantity of insulating materials such as lime and so on just under the electrode column, otherwise it would be difficult to power on the electrode column, or even break it.
electrode column may be hurt when it moves up and down if the furnace cover is out of the position.
When making a connection, lost or damaged pitch plugs must be replaced.
The reason must be found out if a gap appears between two electrodes after connection. The electrode column can only be loaded after the gap being eliminated.
The electrode column must be strictly perpendicular to the ground lever. Oblique column is not allowed during operation.
The holder must be placed between the two safety marks on the top electrode, otherwise the column may be broken.
Generally, different manufacturers may make their electrodes with different raw materials and processes, therefore the physical and chemical properties of their electrodes are usually different. Please do not fit electrodes and nipples made by different manufacturers together.
Applications
Graphite Electrodes UHP with Nipples for Electric Arc Furnace
Electrodes in electric arc furnace and ladle refining furnace for steel making;
Electrodes in electric smelting furnace for producing industrial silicon, yellow phosphorus, corundum and so on.
- Q:What is the role of the Pt electrode? What is the difference between the graphite electrode and the graphite electrode?
- This kind of stable material because of the chemical properties is stable, is often used as a counter electrode. The electrode is composed of circuit and the working electrode by current.Pt electrode, carbon electrode are inert electrode, relatively stable, can be used as the electrode.
- Q:Graphite graphite graphite graphite electrode what is the use?
- Natural graphite electrode is the main raw material with graphite, high purity flake graphite powder or high carbon flake graphite powder as raw material, because carbon or graphite powder purity is high, the effect of conductive graphite powder is better in smelting alloy steel, iron alloy, electrode graphite powder as raw material. The electrode produced, then the strong current through the melting zone, the arc electrode into the electric furnace, the electrical energy into heat, the temperature rises to 2000 degrees Celsius, so as to achieve the purpose of melting or reaction.
- Q:After electrolysis of CuCl2 solution with graphite electrode for a period of time, we can observe that the graphite surface attached to the DC power supply is attached to the red material,And will the color of the solution be deep or shallow?
- During electrolysis, cations move toward the cathode, electrons are reduced at the cathode, anions are moved toward the anode, electrons are lost at the anode and oxidized. And you use both sides of the graphite rod, is inert electrode, so there will be no copper ions added to the solution, copper in the solution of consumption, the color of natural shallow.
- Q:Where is the graphite electrode scrap?
- Vortex ring formed in a highly ionized internal ICP can be regarded as the secondary coil of the transformer is only one turn, and the work coil water is equivalent to the primary winding of the transformer, the coupling between them, the strength and direction of the magnetic field varies with time, the electronic and ionic field acceleration continuously changes its direction of motion. Lead to Joule heating effect and incidental ionization. This gas forms a new and stable "electric flame" light source in the quartz torch tube in a very short time.
- Q:Graphitized anode, cathode and graphite electrode, respectively How can one differentiate and use differently?
- In an electrolytic cell, the current from a class called graphite anode plate into the electrolyte electrolysis industry, the anode is made of plate shape, so called graphite anode plate, widely used in electroplating, wastewater treatment, industrial anti-corrosion equipment or special materials.
- Q:What are pyrolytic graphite electrodes used for?
- The weight is lighter: the density of graphite is only 1/5 of copper. When the large electrode is used for EDM, it can effectively reduce the burden of machine tools (EDM). It is more suitable for applications on large moulds.
- Q:I used 12V direct current, graphite electrode electrolysis sodium sulfide solution, the anode produced a large number of black material, this is why ah?
- Is this principle. Graphite is a layer, each layer, each carbon is SP2 hybrid, and around three carbon connected, finally, between layer and layer formed delocalized covalent bond, making layer and layer can be connected. However, the delocalized covalent bond is not very stable, in attracting Yang Jizheng charge, delocalized covalent bond will certain destruction, the force between the graphite layer and the layer becomes small or not, so as to open.The black stuff is graphite
- Q:What's the purpose of the electrode material?When the electrolytic molten state of NaCl is said, what is the use of the graphite electrode and the iron electrode?
- The copper electrode used for finishing size of the copper electrode discharge speed is not fast but spent graphite electrode is relatively smallRequirements of the high surface, the appearance of products are copper electrode discharge processingThe iron electrode is not clear enough to be used
- Q:What kinds of carbon are there?
- Carbon products by product use can be divided into graphite electrode, carbon block, graphite anode, carbon materials, carbon electrode, carbon paste, electric, carbon fiber, special graphite, graphite heat exchanger etc..
- Q:How does graphite produce solar cells?
- In addition, the Research Report of the first author, Massachusetts Institute of Technology Department of materials science and engineering postdoctoral Zhang Shenggen said, different from other semiconductor temperature has been rising continuously, the graphite electrode coating Zinc Oxide nanowires can be temperature controlled at 175 degrees celsius.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Graphite Electrodes UHP with Nipples for Electric Arc Furnace
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
