Chopped Stands for Thermoplastics
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Chopped Stands for Thermoplastics |
Chopped Stands for Thermoplastic are based on silane coupling agent and special sizing formulation, compatible with PA,PBT/PET, PP, AS/ABS, PC, PPS/PPO,POM, LCP; E-Glass Chopped Stands for thermoplastic are know for excellent strand integrity, superior flowability and processing property, delivering excellent mechanical property and high surface quality to its finished product. |
Resin Compatibility | Product No. | Certification | Product Features |
PA6/PA66/PA46 | 560A | FDA | Standard product |
PP/PE | 508A | FDA | Standard product, good color |
PC | 510 | FDA | Standard product, excellent mechanical properties, good color |
PC | 510H | / | Super high impact properties, glass content below 15% by weight |
POM | 500 | / | Standard product |
PP/PE | 508H | / | Excellent detergent resistance |
PA6/PA66/PA46/HTN/PPA | 568H | / | Excellent glycol resistance and high temperature resistance and fatigue resistance |
PBT/PET/ABS/AS | 534A | / | Standard product |
PPS/LCP | 584 | / | Excellent hydrolysis resistance and low quantity of flue gas |
Package:
Eachroll of AR-glass fiber spray roving weight 18kg. It is wrapped by a shrinkingpolythene film, then to be packed in one carton. 48 cartons or 64 cartons areto be packed in one pallet. 20 pallets (on two levels) are to be loaded in a 20feet container, giving a total net weight of approximately 20 tons.
Other packing methods are available, according tocustomers' requirements.
Storage:
ARfiberglass spray up roving should be stored dry in their original package, thebest conditions being at a temperature of between 15 and 35, and at a relativehumidity of between 35 and 65%. If the product is stored at low temperature(below 15), it is advisable to condition in the workshop for 24 hours beforeuse to prevent condensation.
- Q:Carbon fiber is better than glass fiber reinforced plastic
- Carbon fiber is better than glass fiber reinforced plastics, lighter in weight, stronger in strength and stronger in toughness. Compared with the traditional carbon fiber glass fiber, the young's modulus is more than 3 times; compared with Kevlar fiber, the young's modulus is about 2 times in the organic solvent, acid and alkali insoluble swelling, outstanding corrosion resistance.
- Q:What's the difference between fiberglass roving and spun yarn? Is the production equipment the same?
- The company has advanced production equipment, strong technical force, mainly produces non alkali glass fiber 30 and 40 spun yarn, and produces 1500 tons annually. There are two kinds of paraffin and silane
- Q:Can you describe the production process of glass fiber and the production process?
- The production process of glass fiber generally includes: Purchase the raw materials, mixed according to the formula, and then transfer to the glass furnace for melting and refining, after operation channel flow to the bushing, the sizing agent after coating by wire drawing machine traction, forming the original cake, and then flow to the rear section reprocessing procedures (usually a short cut, winding, weaving, puffing and twisting) or sell (direct yarn)
- Q:HS code for alkali-free glass fiber yarn
- The HS encoding the alkali-free glass fiber roving yarn is 70191200 and chopped yarn, spinning and Chinese HS EU tariff as follows, S and Z. Spun yarn is a spinning twist E-glass fiber. My question is whether it is yarn or spun yarn. If it is yarn, it would be twistless.
- Q:A chromic acid concentration and what kind of glass?reinforced?plastics should be used in chromic acid waste gas purification and recovery device.
- Purification tower body is made from glass fiber reinforced plastic which is composed of resin and glass fiber cloth by curring. Resin with strong resistance can be found with the help of medium concentration and temperature, then it will be fine.
- Q:An introduction to glass fiber geogrid
- It is net?structure material woven through a certain method. In order to protect the glass fiber and improve the overall performance, it is geotechnical base material with excellent performance formed by a special coating treatment process. Glass fiber alkali free twistless roving is the main material of glass fiber geogrid.
- Q:Main characteristics of glass?reinforced?plastics grating
- long period of installation and use, aging resistance, free maintenance and so on. llightweight, glass fiber content of more than 30% (weight percent), beautiful. Glass?reinforced?plastics grating is based on unsaturated polyester resin (includes isophthalic,ethylene, phenolic aldehyde, bisphenol A) and is made up of glass fiber roving( wind or pultrusion, middle-alkali or non-alkali). It is formed by weave and mould pressing in metal mould or by heating after hand lay-up with impact resistance, steadiness, skid?resistance, anticorrosion, fire?retardant and weather resistance. Moreover, this product with insulation and thermal insulation property is flat in appearance, good in quality and is easy to cut.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Chopped Stands for Thermoplastics
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords