Electrofusion Welding Machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 20 Sets per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Electrofusion Welding Machine
1.automatically changed and stored
2.universal fusion resistor, barcode and manual
3.check by Korea gas safety corporation
Universal electro fusion processor
Electro Fusion Fitting system is electrically fusion jointing method that the gap between fitting and PE pipe is heated and melted by the means of resistance wires which are placed in the socket in the fitting. Each EF Sockets are controlled automatically by micro-processor and RMS value.
Features
All functions are designed for ease of operation.
The display is equipped with back-lighting. This will enable operator to work in poor lighting and at night
Depending on site, fusion number is automatically changed and stored (up to 10 site names). Inputting site name can continuously connect fusion number and perform work even when moving from site to site.
You can see fusion content using view function without printing. (Black mark at abnormal part)
The built-in printer uses thermal paper (safe for 5 years). Outputting 1 fusion result takes about 1.5 seconds.
Change quantity of output current per hour is divided into 10 sections for output, so that reliability on fused material may be enhanced.
Output capacity is designed as 3600W (@220Vac) in order to supply stable output.
The machine is equipped with a bar code reader of convenient CCD type, which can read at once.
Stable fusion becomes possible thru accurate control of output voltage (8-50±0.2Vac) at the input voltage even with high voltage jumps.
Specification
Operating voltage |
AC86 to 264V |
Fusion voltage |
AC170 to 250V |
Output voltage |
AC8 to 50V ±0.2V |
Operating Temperature |
-23°C to 49°C |
Dimension |
380(W)X320(D)X270(H) |
Weight |
21Kg |
Power consumed |
0.1Kw~3.6Kw |
Output current |
2A~80A |
Fusion data storage |
200 Times |
Fusion time |
10sec to 5999sec |
- Q:If the welding rod does not release in time, will the electric clamp affect the welding machine?
- Sticky electrode has influence on welding machine. Possibility of burnout of welding machine.In the welding process of hand welding, the welding electrode and the workpiece are stuck together, and the welding machine is always short circuited.Because the short-circuit current is big, the long time short circuit will burn out the welding machine.The viscosity in electrode, press the holder shall promptly thumb pressing handle, rod and gun detachment.
- Q:KW how many UN1-100 pairs of welding machines?
- UN1-100 type butt welding machine is about 30KW.Specific parameters are as follows:The project | machine model UN1-125ARated capacity (KVA) 125Primary voltage (V) 380Primary no-load voltage (V) 4.06-8.04Maximum welding diameter (mm) 32Rated load duration (%) 20Maximum tension (kg/mm2) 50Number of welds per hour (times /h) 20-30
- Q:Construction site to do now distribution box, but do not know the power of the welding machine, the general solution to the welding machine is how much power, the largest is how much, the minimum is how much, thank you!
- 1. If you already have a welder, you can calculate the data according to the welding machine nameplate data. The power supply of the welder is usually single-phase 380V, multiplied by the nameplate, and the I1max is the maximum power of the welder;2. If you do not have a welder, please refer to the answer on the first floor.
- Q:380V 150KVA flash butt welder, what kind of cable do you need?
- The wire diameter is usually calculated according to the following formula:Copper wire: S= IL / 54.4UAluminum wire: S= IL / 34UIn style:I - the maximum current (A) passed through a wireL - the length of the wire (M)U - permissible power drop (V)S - cross sectional area of the conductor (MM2)So, you know what material and how long wires can be used to determine how much cable you want.
- Q:Consult 1 sets of 100KVA butt welding machines. What is the power? How much is the power consumption per hour?
- The most conservative approach: welding work, clamp the power supply current: A*V is power (W), if it is three-phase welding machine, then *1.4.
- Q:What welding machine is used for butt welding of stainless steel pipe?
- Argon arc welding, stainless steel welding wire, DC welding machine and stainless steel welding rod!
- Q:What is the reason that the welding band saw blade is not firmly used after two years of flash butt welding machine? How to solve?
- Check the electrode face of the welder. There is something wrong with it.
- Q:How many coarse copper core cables should be used for the butt welding machine for 100kW?
- The temporary load rate of the welding machine is very short, although the power is short and the power is large, the current is:I = P/U = 100/0.38 = 263 (A)Because of its load rate of less than 10%, the transient overload of the wire will not be a problem, the experience data from the 16 square copper core wire can be loaded (in experience).
- Q:What is the power of the welding machine used on the site, kW?
- 1, general steel welding machine about 100KVA input power, big have 150KVA, small have 63KVA.2, welding machine is also called current welder or resistance touch welding machine. By using the resistance between the two workpieces' contact surfaces, the contact surfaces of two mutually butted metal can be instantly heated, melted and fused instantaneously through a low voltage and high current.3. Power refers to the amount of work done by an object in unit time. That is, power is the physical quantity describing the speed at which the work is done. The amount of work must be, the shorter the time, the greater the power value. The formula for power is power = work / time. A physical quantity of power that represents the speed of a work. Work done in unit time is called power, expressed in P. The power is equal to the scalar action with the object of force speed product.
- Q:Is the spot welding machine good or DC?
- AC welding machine is the wire package step-down transformer using welding rod, this machine, old technology, power consumption, copper consumption.The DC welding machine includes thyristor, inverter (MOS tube, IGBT single tube and IGBT module), and the technology is more and more advanced.The inverter is a new technology that has appeared in the last 10 years, saving more than 35%. Because there is no large transformer, a great deal of copper is saved, and the transformer consumption is also reduced a lot. The disadvantage of DC is that the magnetic deviation blows, and the other is all advantages. Arc stability, weld formation is good, and there is welding rod, general acid welding rod is AC and DC can use, alkaline welding rod recommend DC, cellulose electrode, seems to only dc.
1. Manufacturer Overview |
|
---|---|
Location | Jiangsu,China (Mainland) |
Year Established | 2010 |
Annual Output Value | |
Main Markets | 20.00% Western Europe 20.00% Mid East 20.00% South America 20.00% North America 10.00% Northern Europe 9.00% Southeast Asia 1.00% Central America |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | 61% - 70% |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | 10,000-30,000 square meters |
No. of Production Lines | 7 |
Contract Manufacturing | OEM Service Offered Design Service Offered Buyer Label Offered |
Product Price Range |
Send your message to us
Electrofusion Welding Machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 20 Sets per Month set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords