Q:How the concrete mixer works

1) self-falling blender The inner wall of a self-falling mixer has curved blades. When the cylinder is rotated around the horizontal axis, the blade constantly elevating the material to a certain height, and then the free fall, blending with each other. (2) a strong mixer A strong mixer is mainly based on the shear mechanism. In a blender, there are blades that rotate in a stirring shaft. (3) the selection and application of mixers 1) type selection Concrete mixer should according to the project specific conditions (such as size, length of time limit for a project of quantities) and the requirements on the performance of concrete to be right choice. 2) the production capacity of the mixer is calculated The productivity of the blender is calculated in the following form: Q = 3.6, VK/t1t2t3 (m3 / h) Type t1, t2, t3 - for loading, stirring, discharging time (S); V -- the capacity of the blender; K - the utilization factor of each working time.

Q:Is the concrete mixer and mortar mixer a machine

A concrete mixer is a machine that mixes cement, gravel and water into concrete mixtures. It consists mainly of mixing, loading and unloading mechanism, water supply system, original motive, transmission mechanism, frame and supporting device. Including through shaft connected to the drive motor structure dynamic mechanism and driven by the driving mechanism of drum, the drum cylinder jacket around the cylinder cylinder gear ring set, set with the ring gear meshing gear on the shaft. The utility model has simple structure, reasonable, the use of mesh gear, gear ring, which can effectively overcome the fog had, between the roller and the mixer drum skid phenomenon; The driving mechanism can further assure the skidding between the roller and the mixer. Works: make each composition on the macro and micro evenly, destruction of cement particle reunion phenomenon, promote the development of dispersion phenomenon, initial water damage of cement particles on the surface of the compound film wrapping layer, prompting particle collision between friction materials, and reduce the influence of dust membrane, improve the mix of each unit body to participate in sports frequency and trajectory of the crossover frequency, acceleration and qualitative.

Q:How many tiles are in the concrete mixer on the site

The power of the mixer motor on the site is 75KW

Q:For example, what is the more detailed and better td-50 td-80 td-60

That's right, tipping over, tdcm125-6d Turn out the material JZC350 (rdcm350-6e, rdcm350-8eh, rdcm350-11e), JZC500, JZR750, JZR1000 Forced JS500, JS750

Q:The difference between concrete mixer and concrete mixer

Concrete mixing equipment is divided into concrete mixers and concrete mixers. Concrete mixing stations are also made of mixers. The concrete mixer is divided into three kinds of drum mixer, double cone and double cone. Concrete mixing stations are divided into engineering stations and commercial mixing stations and simple concrete mixing stations.

Q:How many cubic meters of concrete is mixed with concrete mixer?

The 1000 type 1 square 2000 type 2 square 3000 3 square

Q:Common type of concrete mixer

Self-falling concrete mixer The mixer is placed in a vertical mixing principle. As the mixing cylinder turns, the concrete mixer is used to make the free drop in the barrel and stir. Self-falling concrete mixer is used for mixing plastic concrete and low liquid concrete. The body and blade wear less and are easy to clean, but the power consumption is large and the efficiency is low. It is usually 90-120s. This kind of mixer has a lot of wear and tear on concrete aggregate, which affects the quality of concrete. Strong concrete mixer It contains a number of leaves in the mixing bowl, whisk the blade around the vertical axis or the horizontal axis, and force the material to stir until it is well stirred. The concrete mixer mixing effect. Suitable for mixing dry concrete and lightweight aggregate concrete, and also can stir and low liquidity concrete, mixing quality, fast mixing, the advantages of easy operation and safety. But the machine is worn badly. It is necessary to use high strength alloy steel or other wear-resisting material to make lining, which is used to concentrate the mixing station or the prefabrication plant.

Q:What is the difference between a concrete mixer and a mortar mixer

Concrete is made by mixing several kinds of aggregates and water, cement and mixing. Because of containing coarse aggregate, and therefore require huge stirring power, also requires wear-resisting, so his stirring blades and liner is high chromium cast iron, or pieces, power is big, like JS500 will be 18.5 kw motor to drive! And the mortar is not contain coarse aggregate, so the power is very small, the power consumption is very low, do not need wear-resisting piece, appear easy and clever!

Q:How many square concrete can be produced in an hour of concrete mixer

The blender can produce 50L concrete at a time, which is 0.05 square concrete. The blender is about 20 times before the concrete is produced. Mixer, it is a kind of with the blade shaft rotating in the cylinder or tank, will a variety of raw materials mixing, make it become a kind of mixture or machine suitable for consistency. The blender is divided into several kinds, such as strong mixing machine, single-sleeper shaft mixer, two-sleeper shaft mixer and so on. Note: mixers and automatic feeding machines must be cleaned, especially in winter, which can prolong life. A blender is a mixer because the mixing machine is commonly used to mix and stir all kinds of dry mortar

Q:How is the concrete mixer cleaned

I don't know which type of blender you're talking about. The self-falling mixer is the roller mixer. Rinse directly with water. The strong mode is also the JS mixer water rinse to notice whether the shaft end of the shaft is clean, and be careful not to use the side shovel to break down otherwise there will be a sealing problem