Mylar Lamination Film- 40mm Width Metalized PET/Polyethylene
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m²
- Supply Capability:
- 1000000 m²/month
- Option:
- 1.2m*3000m
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Product Structure
Widely used for laminating with EPE insulation, Bubble insulation, woven fabric insulation, etc
● Aluminum foil – LDPE
● Aluminum foil- PET- LDPE
● Clear Transparent PET-Aluminum foil – LDPE
● Aluminum foil-Metallized PET- LDPE
● Metallized PET- LDPE
Product Application
Widely used for laminating with EPE insulation, Bubble insulation, woven fabric insulation, etc
Product Advantage
Light weight
• High manufacturing accuracy
• High strength
• Small inertia resistance
• Strong heat dissipation ability
• Good visual effect
• High reflective insulation
• Heat resistant, water proof, stable at high temperature;
• Environmentally friendly, no smell and not-toxic;
• Smooth and clear surface;
Product Packing
1. Waterproof paper then PVC shrinking Film
2. Kraft paper only
3. Woven cloth
4. Kraft paper or Water Proof Film then Metal/wooden pallet
5. (Also as your request. )
Product Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
3. The products should be stored at room temperature and kept from wet and heat source.
4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
5. The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.
Product Data Sheet
PROPERTIES | UNIT | VALUE | TEST METHOD |
Basic weight | gsm | 33.5 | ASTM D646 |
Thickness | mic | 23.2 | ASTM D646 |
Tensile strength: M. D. X. D. | N/15mm | 13.5 13.5 | ASTM D882 |
Delaminating Values | N/15mm | 1.5 | ASTM D904 |
Reflectivity of foil surface | % | 95 | ---------- |
Temp. Resistance | -40°C 130°C | No Delamination No Delamination | ASTM C1263 |
Water vapor permanence | ng/N.s | 1.15 | ASTM E-96 |
Product Picture
FAQ
1. What is the product keeping conditions?
The Aluminum Foil Facing should be stored at room temperature and kept from wet and heat source.
2. What is the guarantee years of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
3. What is the delivery time of the order?
In the purchase of product within four working days, we will arrange the factory delivery as soon as possible. The specific time of receiving is related to the state and position of customers. Commonly 7 to 10 working days can be served.
- Q:What are the appliances for drawing plastic films?
- Samples can be selected according to different products or according to the existing product standards. Under normal circumstances, the larger elongation, try not to use too wide testSample. Any test machine and thickness gauge that can do tensile test and meet the relevant requirements can be used as test instruments and equipment. Operate the test machine according to the specified speed, if there is no gaugeFixed speed, the choice of hard materials at low speed, soft materials choose higher speed. If the specimen is broken beyond the mark line, the sample will be void and the specimen will be re tested.
- Q:Plastic film in the air conditioning metal shell can not be exposed, how do?
- Plastic film attached to the metal shell, because the plastic is close to the metal surface, a long time, the formation of intermolecular forces and metal surface of the plastic shell, to stick together, heating will lead to intermolecular force becomes small, but can also melt the plastic film, may lead to stick more firmly; recommend the use of ice the way to reduce the temperature of the metal shell, so that the intermolecular force will be reduced, while the plastic will harden, safer
- Q:How is the blow up ratio of a plastic film calculated? What's its formula?
- Well, the draw ratio is the ratio of the annular section area to the cross sectional area of the mandrel between the mandrel and the die. But I don't know the blowing ratio of PE and PO.
- Q:Which plastic film is more suitable for making heat shrinkable labels?
- Need to blank, QS logo for color requirements, bar code is required for the blank area, height can be adjusted. But not less than GB 1/3.
- Q:Is plastic film the same as glass cloth?
- Not the same, plastic film is not leaking, glass cloth is woven out of leakage
- Q:Can the barrier in the refrigerator be covered with plastic film?
- Just leave the plastic film on the back of the freezer, or the surface of the evaporator line inside the freezer.
- Q:PVC plastic film, ultrasonic welding machine welding, welding can.
- PVC film fused traditional method is the use of high frequency welding machine, if you must do something to subvert the traditional innovation, it is rather difficult to estimate, ultrasonic machine in the welding of PVC films when there is no way out with the same high frequency welding welding effect.
- Q:What kind of plastic film is a little sticky and can be affixed to the label perfectly? What is it like a sticker?
- PE cling film and PVC self mucosa are OK
- Q:What brand is a plastic film on the surface of waterproof coiled material?
- Usually manufacturers directly use their own production, almost no separate circulation of the market, is one of the production process.
- Q:What's the difference between PE plastic film and PVC plastic film?
- PE is polyethylene, that is, plastic wrap, that is, PE sprinkle. PVC is PVC, that's about plastic pipes. Which ones need to be used?.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Mylar Lamination Film- 40mm Width Metalized PET/Polyethylene
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m²
- Supply Capability:
- 1000000 m²/month
- Option:
- 1.2m*3000m
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
