PVC Pipe1.0MPa Specification: 16-630mm Length: 5.8/11.8M
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m
- Supply Capability:
- 20000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Description of PVC Pipe :
Material: Virgin Rigid PVC resin, no recycle material
Process: vacuum forming extrusion
Color: various colors, we can make color according to Panton card No.
Quality Standard: Smooth surface, no spot, no shrink mark, no surface quality defect.Check from cross section, homogeneous in density, good plasticizing degree, relative chemical/physical property meet customer requirement. We supply different environment protection products to meet different market requirement.
2.Features of PVC Pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
3.PVC Pipe Images：
4.Specifications of the PVC Pipe:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity:g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature: (C) >=79
6) Longitudinal Reversion: %, 150(C) <=5< span=""><>
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test: TIR, %, 0(C) <=10< span=""><>
5.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:I need some info about collapsible tubes... so guys pls suggest me some links or some useful points about collapsible tubes like its properties, applications, etc. asap...Thanq Buddies
- Information is below.
- Q:Looking at getting a Kamp;N Cold Air Intake and am unable to decide between the chrome or plastic tube? Does one perform better than the other? I know the Chrome would definitely look better under the hood.
- No they will both do the same thing, and that's provide a path for the airflow. The chrome one is probably plastic anyway. Neither will perform any better than the other. Not like the intake setup will do anything useful either, but you didn't ask that.
- Q:Are plastic tubes suitable for shipping and transportation?
- Yes, plastic tubes are suitable for shipping and transportation. They are lightweight, durable, and can provide protection to the contents inside. Additionally, plastic tubes are resistant to moisture and can be easily sealed to prevent any damage during transit.
- Q:Do plastic tubes have any odor or taste?
- Yes, plastic tubes can have a slight odor or taste, especially if they are made from low-quality or recycled materials. However, most plastic tubes used in various industries are made from food-grade materials and undergo rigorous testing to ensure they are odorless and tasteless.
- Q:I have a pond pump and standard aquarium plastic tubing. I will be drilling tiny holes in equal increments throughout the tubing to release the air. Is there an equation to show the air pressure that will be released through the holes? I would like to know how many holes I need and how far to space them to achieve a certain amount of air pressure to be released from a specified length of tubing.This is a test and will not be done under water. A simple diffuser will not work for this application.Ideally I would like a formula where I can input the following and get a result:Tube LengthTube DiameterPump PSITube Hole SizeTube Hole QuantityTube Hole SpacingResultAirflow per Tube HoleAny help would be greatly appreciated. If you need more information please let me know.Thank you,
- Well, I suppose it could be done, but you would need the pressure at each hole,which is decreasing as the tube length and water depth. And you have so many variables! I also like to calculate such things as you are doing, but this is really over the top! Here is what I would do; Get a measured paper cup (say 1 cup, or 1/4 litre). Experiment with various sizes and number of holes in your tubing, then hold the cup over the coiled tubing, under water at required depth, with air pump running. Measure the time to fill the inverted cup with air. If a 1/4 litre container fills with air in 15 seconds (1/4 minute), you know you are getting 1 litre per minute. Then try other hole configurations to get what you want. This would be more fun, more practical, and will give bettter results. Good luck Bill
- Q:What are the different printing options for plastic tubes?
- The different printing options for plastic tubes include screen printing, offset printing, digital printing, and heat transfer printing. These methods allow for the application of logos, texts, and designs on plastic tubes for branding and identification purposes.
- Q:Also if this isn't safe then how unsafe was it when some kid spilled a whole container of mercury on the floor in my class and started playing with it. Ya anyway i would never touch it.
- Your Hg is safe in the tube and MUCH safer than some kid plating with it with his fingers. The expression Mad as a Hatter comes from olden days when the felt on hats was applied with a mercury paste by workers using their hands
- Q:I was changing my engine oil via the dipstick tube and a special suction device that pumps the old oil out of the sump to be replaced with fresh oil. Unfortunately, i had to patch up a hole in the tube on the suction device with parcel tape/sellotape wrapped around and a small piece of tape (around 2x2 square) fell into the engine dipstick tube and appears to have slid down into the oil sump.Will the oil filter make any difference in keeping melted plastic out of the engine? Am i best calling up the manufacturer, not the dealer as i don't want them to know about my error. The engine still runs and i have driven 20 miles so far with no problems. 2009 year Citroen C1Thanks
- I agree, if the plastic piece lodges itself to the oil pump screen, this will severely reduce oil pressure and you will destroy the engine. Only thing to do is to put the car up on the lift, drop the oil pan and hope the part is still in the pan and not circulating elsewhere in the engine, but it should be in the pan probably right next to the oil pump screen. at the very bottom of the oil pan. good luck.......
- Q:FPC pipe is what tube, no can be used in outdoor direct buried?
- FPC is PVC semi rigid plastic wire and tube, FPC. It has the characteristics of high density, light weight and thin thickness;
- Q:theres a pvc pipe thats completely sealed in space like 10 meters long and its filled with air. Theres a tank inside the pipe filled with super compressed air. What would happen if the tank released all its compressed air in one direction and flew forward crashing into the front of the pvc pipe? Would the compressed air shooting out of a nozzle suddenly dissipate into the less dense air inside the tube or would it continue to the back of the tube and crash into it. Also when the air tank flew forward, and crashed into the front of the pvc pipe would it carry the pipe along with it, since it has so much more mass than the plastic piping?
- There is a general principle about internal forces that applies to situations like this and what it amounts is that the center of mass can never move. It's like that movie Gravity; in space, a stationary closed system can't make any net motion. If the cylinder shoots off in one direction the pipe will go in the other with equal momentum, and when it crashes into the end, both parts will reverse direction. And the two parts will bounce back and forth off each end until heat from the collisions dissipates all the energy.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PVC Pipe1.0MPa Specification: 16-630mm Length: 5.8/11.8M
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m
- Supply Capability:
- 20000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
