Stainless Steel Impeller Castting Forging and Machining Wt.from 2Kg to 290Kg
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Stainless steel impeller castting forging and machining Wt.from 2Kg to 290Kg.The use of casting and forging mode to produce blank,and manchinining the parts.
Product |
Name: Mining Machinery Parts PartsDetail:Casting machining Process: Water glass process of lost wax investment Casting Standard: ASTM, AISI, DIN, BS and JISMax Stainless Steel Impelle Casting Size: 1 meter Stainless Steel Impelle Casting Weight: 0.2~190Kg Stainless Steel Impelle Dimension Tolerance: CT7Surface Roughness: Ra6.4~12.5 Stainless Steel Impelle Productivity: 7000 tons per year A world class manufacturer & supplier of lost wax investment castings in carbon steel and alloy steel, is one of the large-scale professional investment casting production bases in China, consisting of both casting foundry & machining factory. Annually more than 70000 tons Precision casting parts are exported to markets in Europe,America and Japan. OEM casting service available according to customers requirements.. |
- Q:The pulley on the motor is faster than the speed of the drive
- But you have to think about the payload, the load is too heavy, the electric opportunity doesn't move or burn.
- Q:What is a multi-wedge belt
- It is thin and flexible, and it can be used to drive more than one wheel with a small diameter drive (less than the traditional triangle belt wheel). Adaptable to high-speed transmission with a speed of 40m/s. Small vibration, low heat, smooth operation. Heat resistant, oil resistant, wear-resisting, use elongation small, long life. The advantage of multi-wedge is: The area of contact area and the friction force of the multi-wedge belt and the belt wheel are larger, the load along the distribution of the bandwidth is more uniform, and therefore the transmission capacity is greater. Due to the thin, flexible and reasonable structure of the belt, the working stress is small and can work on the smaller belt.
- Q:How many kinds of electric belt are there, how are the models classified
- The profile of the trapezoid synchronous belt with the trapezoidal band is a single surface with two kinds of teeth. It is short for single and double-sided. Double-sided tape again in tooth arrangement is divided into symmetric teeth type code (DA) and staggered tooth type (code DB). Trapezoidal tooth synchronous system with two kinds of size: pitch system and modular system. Using pitch system in our country, and according to the ISO 5296 to formulate the corresponding synchronous belt transmission standard GB/T 11361-11362-11361 and GB/T 11616-1989.
- Q:You want to increase the speed of the motor, the size of the pulley
- You can calculate the circumference of a pulley. You do not say that the diameter of the pulley of the motor is impossible to calculate. The diameter of the circumference of the pulley of the motor pulley. The easiest way to do that is to change the extreme number of the motor, not to make the money, to 2
- Q:How do you change the pulley?
- Technical requirements: (1) wear the right track shoes when you tighten the screw. (2) adjust the position of the motor or motor in the case of the "first line". (3) when the belt is tightened, both hands overlap with the lower pressure belt 2 ~ 3 times, and press down 1 ~ 2cm to qualify. (4) when changing the belt, it is necessary to loosen the wire of the motor, and then loosen the screw. (5) if "four points" is qualified, it is only a belt loose, and the belt loosens with the top silk, if "four. Point line is not qualified, namely the belt wheel is not in the same plane, need to adjust the position of electric motor.
- Q:How to remove the crankshaft pulley of the car engine
- Have YOU ever taken the screw down The wheel turns and you hold on to the wheel, you can catch the wheel, you can put on the brakes, you can put the brakes on, and then you start off, and then you step on it and then you stop and you stop It is not always hard to remove the screw, it is the amount of impulse, you can reverse it and turn it backwards, you can't get the screw
- Q:Size of the belt wheel
- Belt drive mainly include: flat belts, v-belts, synchronous toothed belt three, three belts have national standards, but the pulley due to the change of the transmission ratio, power is larger, not corresponding national standards or national standards cannot cover all the content, but the national standard to determine the selection scope, conditions of use, design method, etc.
- Q:What is the thing between the pulley and the motor shaft?
- You can use a puller to remove the pulley. That is, the spare parts are not damaged. The horizontal bonds between the pulley and the motor shaft should be flat.
- Q:How does proE draw the pulley and the belt and the simulatio
- The belt is scanned and the wheel is designed in size. The belt simulation is controlled with the speed of the tangent groove.
- Q:Why does the pulley cause fever
- 1, belongs to friction drive belt transmission, heat transmission process belongs to the normal phenomenon, but there is a range of fever, beyond this range is not reasonable (normal face 60 ~ 80 degrees). 2, the fever exceeds 60 ~ 80 degrees, the main slippage is caused by, please look for the following reasons: A, the tension in the belt is not smooth. (the tension can also cause the movement to be slower and the belt beats.) B) the power of the belt is not enough to cause the skid to slip (note that the belt installation process has been damaged/damaged).
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Stainless Steel Impeller Castting Forging and Machining Wt.from 2Kg to 290Kg
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords