• T8 LED Tube SMD Chip High Efficiency 1.5M 18W System 1
T8 LED Tube SMD Chip High Efficiency 1.5M 18W

T8 LED Tube SMD Chip High Efficiency 1.5M 18W

Ref Price:
$9.48 / pc get latest price
Loading Port:
Shenzhen
Payment Terms:
TT
Min Order Qty:
10 Pcs pc
Supply Capability:
100000 Pcs Per Month pc/month

Add to My Favorites

Follow us:


OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing
T8 LED Tube SMD Chip High Efficiency 1.5M 18W 1. This product meets the standard of CE certification.
2. With internal No-isolated power supply.
3. Round and the elliptical tube are available.
4. Use the most mature international well-known LEDSMD2849 as the light source, which can ensure the led tub35 as the light source, which can ensure the led tube brightness and long lifetime, also can reduce the light decay.
5. Use the high quality aluminum PCB for LED’s better heat dissipation.
6. High-grade PC cover with nice light transmittance(> 95%),Transparent PC cover and frosted PC cover are available.
7. 180 degrees beam angle makes the lighting effect better.
8. CRI(standard products)>70,it can be over 80 if required.
9. Ambient temperature:-20°C-40°C, surface temperature: 42°C-45°C
10. No mercury, lead or other hazardous materials; no radiation, no electromagnetic radiation, no frequency flash, instant start up, no hurting eyes.
Applications:
Replacement for conventional fluorescent tubes:
1. Hotels
2. Conference/ meeting room
3. Commercial Complexes
4. Residential/ Institution Buildings
5. Schools, colleges & Universities
6. Hospitals General li
Q:How much is the ballast of the fluorescent tube coming out
Because the ballast is in a series in the circuit, the output voltage is constant in normal circumstances, It's just that the electric light starts in an instant and produces a 600v-1500v pulse voltage that lasts about 1ms
Q:The notice of LED daylight lamp tube
Without ultraviolet light, no LED lights will not produce ultraviolet light, so unlike traditional lamps, there are a lot of mosquitoes around the light source. The room will become cleaner and cleaner. A voltage adjustable 80v-245v traditional fluorescent lamp is lit by a high voltage released by the rectifier, which cannot be lit when the voltage is lowered. LED lamps can be lit in a range of voltages, and can also adjust the brightness
Q:The energy-saving device installed on an old-fashioned daylight lamp is similar to the lighting in the university library, where lights are illuminated and the lights go out
Make a voice-controlled circuit to control the power switch.I hope my answer will help you.
Q:Currently, the 48-inch led fluorescent lamp tube 18w is used for how much dc voltage
The other 48 inch is 1.5 m lamp tube, the lamp tube of 1.5 m should also do 20W above. The average of 1.2 m is 18W.
Q:How to choose daylight lamp? What is the light bulb specification?
The fluorescent lamp shines after normal. Due to alternating current (ac) continuously through the ballast coil, the coil of self induction electromotive force, self inductance electromotive force blocking the current in the coil change, ballast step-down current-limiting role at this moment, the current is stable in the range of the rated current of the lamp tube on both ends of the voltage is stable within the rated voltage range. Because the voltage is lower than the ionization of the starter, so is no longer the starter in parallel at each end of the work, daylight lamp specifications: general search said 50 cm, 100 cm, 120 cm. Fluorescent lamp structure and function: each has a filament on both ends of the fluorescent lamp, inside the tubes filled with tiny amounts of argon and the thin mercury vapor, tube coated with phosphor, on the wall between the two filament gas when conducting an ultraviolet, the fluorescent powder soft light.
Q:The lamp tube of LED lamp is full plastic lamp tube good or half plastic half aluminium tube good?
The whole plastic lamp tube is the one of the most early application, because the main use is not isolated type power source, in order to avoid electric shock problem, so more want to adopt whole plastic lamp tube. It USES a phi 5 hat tube LED. The fluorescent lamp the biggest problem is that the cooling problem, because all the heat sealed in tube, don't spread out, the light failure is severe, plus straw hat tube original life is very short, less than 2000 hours it broke.
Q:If you want to replace it with an LED fluorescent tube, how many watts does it take?
This depends on the type of the lamp. For example, the bulb bulb, LED and incandescent, usually we calculate at 1:7 or 1:8, and there is a 1:10 calculation.
Q:How does the T8LED light tube replace the fluorescent lamp tube
I just changed it. I bought a LEDT8 type of fluorescent tube 1 meter 2. 16 watts is basically equivalent to the ordinary energy-saving fluorescent tube 60 watts. It's very bright and bright, and you don't need a flash. But there are brands that don't have to take down the ballast, and you have to consult the person who sells your LED tube. The ballast and the regenerator are broken down, and the different brands are different.
Q:Why does the led fluorescent tube have water vapour in it? What causes it?
The starter down. When the regenerator was knocked down, my home was my own scissors and cut off the ends of the two ends of the regenerator. Then attach the severed head to the insulation tape. search Put the base back to the original. The head of the LED fluorescent tube will be plugged into the base current
Q:A 36w daylight light with a watt LED lamp?
Common fluorescent lamp luminous efficiency is about 53 lumens/watt, LED fluorescent lamp cover (diffusion) is probably about 80 lumens per watt, with transparent cover can be as high as 97 lumens per watt, and white light LED chips still in improving the luminous efficiency, the experimental class has been as high as 150 lumens per watt/tile above, the theoretical maximum of 450 lumens per watt
We are a leading manufacturer of a broad range of LED strip light and LED Tube light. From 2011, we have integrating sphere spectrometer, high speed automatic placement machine, reflow soldering machine, automatic dispensing machines and other specialized equipment and professional R & D department. LED strip light can produce up to 300000 meters per month.

1. Manufacturer Overview

Location Shenzhen,China
Year Established 2011
Annual Output Value
Main Markets

Mid East;Western Europe
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Shenzhen
Export Percentage
No.of Employees in Trade Department 20 People
Language Spoken: Chinese
b)Factory Information  
Factory Size: Above 4,000 square meters
No. of Production Lines About 5
Contract Manufacturing OEM Service Offered;Design Service Offered
Product Price Range Cheap

Send your message to us

This is not what you are looking for? Post Buying Request

Similar products

New products

Hot products


Hot Searches