Torsion Spring, long-service life
- Loading Port:
- Nansha
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5T pc
- Supply Capability:
- 151000000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Features of Torsion Spring:
1) Dimensions:
a) Wire diameter: 0.15 ~ 65mm
b) Thickness: 0.15 ~ 20mm
2) Long service-life
3) Good hardness
4) Good resistance to both high and low temperatures
5) Can be used in various corrosive mediums
6) Main material: carbon spring steel, alloy spring steel,
refractory steel, stainless steel, high temperature
resisting alloy, corrosion-resistant alloy and bronze
7) Widely used in automobiles, motorcycles, electrical
appliances, telecommunication, communication,
aviation, space and other civil fields
Inner packing: plastic or PE bags
Outer packing: corrugated cartons, wooden boxes or pallets
How the torsion springs work?
Packaging Of Our Products
- Q:How should we choose the spring material?
- In the small spring should be used after hardening spring steel wire, cold drawn steel wire and lead bath oil tempered steel wire with high strength and good surface quality, fatigue performance is higher than the ordinary tempered steel wire, simple processing, good manufacturability, quality and stability.
- Q:Is spring steel manganese steel?
- The most important characteristic of manganese steel is that it can be worked hard under strong impact and extrusion, and its wear resistance is improved, mainly by its working hardening.Spring steel mainly requires large elasticity, high yield strength, and can withstand repeated load without breaking. Spring steel only after heat treatment (quenching + medium temperature tempering) can show its high elasticity, that is, after a certain load, does not occur permanent deformation. The content of Mn in spring steel is much lower than that of Mn in manganese steel.
- Q:What kind of production equipment does spring factory usually have?
- Multi function forming machine, coil spring machine, 580 press spring machine, extension spring machine, etc.
- Q:What are the categories of springs?
- A compression spring is spring under axial pressure, the material section in which are round, rectangular and is also useful multi strand steel rayon coiled spring, generally for pitch, compression spring shapes: cylindrical, conical, convex and concave and a small amount of non circular, will there is a certain gap between the ring and the ring compression spring, when subjected to external load when the spring contraction deformation, deformation energy storage.
- Q:How to process Spring Steel
- Spring steel must pay special attention to decarburization and surface quality during rolling. When the steel surface is seriously decarburization, the fatigue limit of steel will be significantly reduced. For high silicon spring steels, such as 70Si3MnA, caution shall be taken to avoid graphitization. Therefore, stop rolling temperature in hot working time should not be too low (less than 850 DEG C), avoid in the temperature range of graphite is easy to form (650 to 800 DEG C) in the long residence time.
- Q:How to distinguish between spring steel and stainless steel
- With saline in two days to put a steel can see rust is a way (can, for 304 stainless steel 201 stainless steel will rust, only less); another way is to put the two kinds of steel can see the reaction is on spring steel in dilute sulfuric acid, oxalic acid, not the reaction or reaction of small stainless steel.
- Q:What's the spring material to?
- There are many kinds of spring steel, the most commonly used are 65Mn and 60Si2Mn.
- Q:The shop glass spring door is too tight, how to adjust?
- Check the glass door first, is it upside down or is it shifted underneath?.After fixing, open the spring panel, and see the adjusting bolt, then adjust the position slowly.Or the upper side of the door folder to be adjusted.Adjust or adjust to stabilize, avoid glass deformation, damage.
- Q:Hydraulic diagram of the one-way valve has two kinds of drawing, with a spring, without a spring, what is the difference between automatic reset function is not? Without a spring, it will not be repeated
- The simplified method of drawing without springs is the same
- Q:What kind of material does spring have?
- Alloy spring steel: alloy spring steel is used to make spring or other elastic parts of steel. Spring is generally under alternating stress, the fatigue failure is a common failure forms, therefore, alloy spring steel must have high yield and yield ratio (s/ b) and the anti fatigue performance of elastic limit, and to ensure that the spring has enough elastic deformation ability and can withstand greater load. At the same time, alloy spring steel also requires a certain plasticity and toughness, a certain hardenability, not easy to decarburization and not overheating. Some special springs also require heat resistance, corrosion resistance, or a stable elasticity over a long period of time. Medium carbon steel and high carbon steel can be used as springs, but because of its hardenability and low strength, it can only be used to make smaller cross-section, less force of the spring. Alloy spring steel can produce important spring with large cross section and high yield limit
1. Manufacturer Overview |
|
---|---|
Location | Suzhou, China |
Year Established | 2001 |
Annual Output Value | more than US$ 5 Million |
Main Markets | North America, South America, Eastern Europe, Southeast Asia, Africa, Mid East, Eastern Asia, Western Europe |
Company Certifications | ISO/TS 16949; ISO 9001:2008 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai |
Export Percentage | 41% - 50% |
No.of Employees in Trade Department | About 170 People |
Language Spoken: | English; Chinese; |
b)Factory Information | |
Factory Size: | About 35,000 square meters |
No. of Production Lines | |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | High; Average |
Send your message to us
Torsion Spring, long-service life
- Loading Port:
- Nansha
- Payment Terms:
- TT or LC
- Min Order Qty:
- 5T pc
- Supply Capability:
- 151000000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords