Fiberglass Bathtub Wall Panels

Hot Products

FAQ

Glass fiber mesh quality soft and hard for the wall, which is better?
The softness of the mesh cloth does not depend on the quality of the mesh cloth. Depending on how much glue is applied. Used in the wall, of course, is a lot of glue, and can increase the degree of alkali resistance. Now there is a kind of urine glue, painted out really hard But this is not alkaline.
Grc light partition board construction steps is what
1, the process Material inspection → technology to the end of the net → clean-up → line → fixed U-shaped steel plate card → live installation → detection of vertical, flatness → fixed GRC light partition board → repeat the vertical degree, flatness → support pipe → tied to the joints with → seam mortar → scraping putty → polished smooth → surface coating. The following are the same as the " 2, prepare materials and construction tools Before the construction, need to prepare GRC lightweight partition board materials and doors and windows supporting frame bench material, and to prepare construction tools, such as temporary fixed fixture "U" type fixture, "L" type fixture, to be horizontal angle iron Of the pry bar, woodworking board saw, putty knife, wooden wedge and so on. The following are the same as the " According to the requirements of the drawings, in the wall and the roof pop-up wall and the location of the doors and windows. And the office, corridors, halls and other rooms are ceiling, so the need for height in the partition wall to do hanging columns and hanging beams.
Glass fiber board to do the wall or do ceiling
Glass fiber board, also known as glass fiberboard, generally used for soft base, outside the package cloth, leather, made of beautiful walls, ceiling decoration. Application is very extensive. With sound absorption, sound insulation, insulation, ring glass board ceiling construction process
What is the difference between GRC reinforced concrete slabs and lightweight aggregate concrete partitions?
GRC reinforced concrete slabs and lightweight aggregate concrete partitions are lightweight wall panels that can be used to make walls. Should be selected materials and processing methods are not the same
How to do with glass fiber wall anti-crack
Do not have to be fainted by the glass fiber, although the use of glass fiber, the surface can not see the crack, but in fact still strong, no use, their own fool themselves; recommended landlord with anti-cracking latex paint, such as Mo Wei Latex paint, it can be painted when the wall can make up for the small cracks in the wall, and the film after forming a certain degree of flexibility to prevent the emergence of cracks, this effect is only Mo Weier can do, please landlord reference!
FRP can be used to make walls
If the use of fiberglass do wall to see and what it is connected to the medium, or very easy to stratify, if it is in the cement surface to do the wall, I suggest you use epoxy resin, resin and sub-reinforced resin and food Grade resin, with food grade resin to do, no harm to the body, that is not food-grade, after curing the harm to the human body than other decorative materials damage small
What should the overall wardrobe design should have?
The main features of the overall wardrobe are: standardized modules, tailor-made. The overall wardrobe according to the different styles can be divided into integral, into the wall, support and into the four categories. The overall design of the wardrobe and the pursuit of harmony with the home, in a warm atmosphere of life, bringing a simple and stylish charm, so that you poetic dwelling, artistic life. Therefore, the overall wardrobe style selection and design is essential:
Is the interior wall made of fiberglass mesh good or wire mesh?
In any case, when the batch wall putty, is not the use of steel wire mesh, and if it is leveling with cement mortar, then you should use the wire mesh.