Fiberglass Wall Panels with Fabric HC-386
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications:
Main Material: Fiberglass wool
Density: Standard 100kgs/m3
Thickness: 25mm, 40mm, 75mm and etc.
Size: Standard 1200*600mm, max 2700*1200mm and etc.
Surface: Decorative or Fiberglass Fabrics in different colors
Edge: Square, Bevel
Quick Detail:
Non-combustible;
No sagging, warpping or delaminating;
Green building material;
Excellent sound absorption;
With different pattern available;
Applications:
Halls, Classrooms, Offices, Shopping centers, etc.
Competitive Advantages:
Fire-resistant;
Thermal-insulation;
Humidity-resistant;
Cleanability;
Environmental;
Elegant;
Safety and Convenience;
- Q:How to do with glass fiber wall anti-crack
- For glass fiber is also used to see you are used in the external walls or interior walls, wall materials are different, a lot of things are not applicable once. Do not apply their own norms. And a slap to shoot the whole law
- Q:Is the interior wall made of fiberglass mesh good or wire mesh?
- If only the local cracks, you can also use ordinary straps paste.
- Q:Glass fiber mesh quality soft and hard for the wall, which is better?
- The general wall of the grid with a fast money about 1 square meters on the good. Tengda grid cloth 8 hair can also be used. Selling is also good,
- Q:What is the difference between GRC reinforced concrete slabs and lightweight aggregate concrete partitions?
- Lightweight aggregate concrete partition board: is made of lightweight aggregate concrete slab, which is suitable for ordinary building grade. Lightweight aggregate concrete is made of natural light aggregate (such as pumice) or artificial light aggregate (such as ceramic) or industrial waste light aggregate (such as slag beads) plus cement and water mixed with concrete. Lightweight aggregate concrete and ordinary concrete is the difference between light aggregate concrete without stones, and some of his aggregate can float on the water.
- Q:FRP can be used to make walls
- Glass (FRP), also known as GRP, that is, fiber reinforced plastic, generally refers to the use of glass fiber reinforced unsaturated polyester, epoxy resin and phenolic resin matrix. Reinforced plastic with fiberglass or its products as reinforcing material, called fiberglass reinforced plastic, or titled fiberglass. As a result of the use of different varieties of resin, so there are polyester glass fiber reinforced plastic, epoxy glass fiber reinforced plastic, phenolic glass steel said. Light and hard, non-conductive, high mechanical strength, less recycling, corrosion resistance. Can replace the steel manufacturing machine parts and cars, ship shell and so on.
- Q:Glass fiber board to do the wall or do ceiling
- Glass fiber board, also known as glass fiberboard, generally used for soft base, outside the package cloth, leather, made of beautiful walls, ceiling decoration. Application is very extensive. With sound absorption, sound insulation, insulation, ring glass board ceiling construction process
- Q:Does the wall paint the shear wall need to hang the fibrous web?
- Fiber mesh, also known as reticular fiber, reticular polypropylene fiber, is a polypropylene as raw material, through a special process from manufacturing. The appearance of a number of fiber monofilament cross-linked from the network structure.
- Q:What is the difference between an ordinary partition board and a lightweight partition board?
- Light wall is a new type of energy-saving wall information, it is a kind of appearance like a hollow floor of the same wall material, but it has two male and female Falcon trough, the device only need to stand up, On a small number of mortar mortar after the assembly can be. It is composed of harmless phosphogypsum, light steel slag, fly ash and other industrial waste residue, by the frequency of steam pressure maintenance. Light wall panels with light weight, high strength, multiple environmental protection, thermal insulation, noise, breathing humidity, fire, rapid construction, down the cost of the wall and other advantages. The inner wall is equipped with reasonable layout of the insulation, sound absorption of inorganic foam profiles or other insulation materials, wall panels by the pipeline pouring, leveling, scientific maintenance, production of high degree of automation, the standard type.
- Q:What should the overall wardrobe design should have?
- The main features of the overall wardrobe are: standardized modules, tailor-made. The overall wardrobe according to the different styles can be divided into integral, into the wall, support and into the four categories. The overall design of the wardrobe and the pursuit of harmony with the home, in a warm atmosphere of life, bringing a simple and stylish charm, so that you poetic dwelling, artistic life. Therefore, the overall wardrobe style selection and design is essential:
- Q:What is the quality of the light barrier now?
- . Increased use of building area: the wall can increase the use of an area of 8-10% or more, is the property development buyers and sellers are happy to accept.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Fiberglass Wall Panels with Fabric HC-386
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords