Polished Aluminum Sheet

Hot Products

FAQ

Aluminium belt car
You're talking about "tracked" cars. 1, tracked cars are the early stages of car manufacturing to meet the needs of a hostile environment and a war environment.
What is the ratio of the thickness of the aluminum strip to the joint of the knife?
Hello, this according to the specifications of the material, the aluminum belt with different state, thickness, knife joint ratio is also different.
Would you like to buy a sensor for measuring the thickness of aluminum ribbon?
ZTMS08 system has been optimized through performance and field calibration, and its main technical specifications and performance parameters comply with the relevant regulations. It can be widely used for thickness measurement of paper, paperboard and other sheet materials.
Aluminum tape spraying process, please?
Curing. The workpiece after spraying is sent into a baking chamber at 180~200 DEG C to heat it and solidify the powder(7) cleaning. After the coating is solidified, remove the protective material and trim the burr
Aluminum foil tape insulation principle, why insulation?
The air conditioner foil is a special material for the heat exchanger fin of an air conditioner, and an early air conditioner foil is a plain foil. In order to improve the surface properties of the plain foil, an anticorrosive inorganic coating and a hydrophilic organic coating are applied before forming to form hydrophilic foil. At present, hydrophilic foil accounts for 50% of the total amount of air conditioning foil, and its use ratio will be further improved. There is also a hydrophobic foil, so that the fin surface has hydrophobic function, prevent condensation water adhesion. Because of hydrophobic foil, the technology of improving surface defrosting needs to be studied further.
1060 what is the hardness of aluminum strip?
Brinell hardness measurement method is to use a hardened steel ball, such as the diameter of 5 mm steel ball, with a certain force into the parts or material surface, and then measure the indentation size, read the hardness value.
Classification of aluminium strips of aluminium strips
The alloy grades of common aluminium strips are 1050, 1060, 1070, 1100, 3003, 3004, 5005, 5052, 8011 and so on. The commonly used states are O and H states. O is soft, and H is hard. O and H can be followed by numbers to indicate the degree of hardness, and the degree of annealing.
Use of aluminium strips for aluminium strips
3003 plate strip. Foil. Thick plate, tensile tube. Extruded tube. Type. Bar. Wire rod。 Cold bar, cold wire, rivet wire, forging, foil, heat sink material mainly used for processing requires good molding property, high corrosion resistance, good weldability or parts, or both have these properties need than the workpiece of 1*** alloy with high strength, such as the transport of fluids tank and tank, pressure tank, storage device, heat exchanger, chemical equipment, aircraft fuel tank, oil pipe, reflective panels, kitchen equipment, cylinder washing machine, rivet, wire.5052 this alloy has good forming performance, corrosion resistance, fatigue strength, candle medium static strength, used in the manufacture of aircraft fuel tank, oil pipe, and the vehicle and vessel sheet metal parts, instruments, lights frame and rivet, metal products