Tensar Triax Geogrid

Hot Products

FAQ

Yes, geogrids are suitable for use in ground reinforcement for wind farms. Geogrids provide excellent soil stabilization and reinforcement, which is crucial for supporting the heavy equipment and structures associated with wind farms. They distribute loads evenly, increase bearing capacity, and prevent soil erosion, making them an ideal choice for enhancing the stability and longevity of wind farm installations.
How much investment is needed for the grid cloth on the production site
The application of the grid is more linked to the advertising industry, which is involved in the basic use of high-rise building wall advertising, due to the special characteristics of grid cloth material, more durable and more durable than the general fabric.
Geogrids improve the performance of geotextile containers by providing additional strength, stability, and reinforcement to the structure. By incorporating geogrids into the design, geotextile containers become more resistant to stress, deformation, and settling. The geogrids effectively distribute loads across the container's surface, preventing excessive strain on the geotextile material and maintaining the integrity of the structure.
Yes, geogrids can be used in the stabilization of mine tailings ponds. Geogrids are commonly used in civil engineering for soil stabilization and reinforcement. They can provide strength and stability to the soil, preventing erosion and minimizing the risk of slope failure. In the context of mine tailings ponds, where the soil is often unstable and prone to erosion, geogrids can be an effective solution for stabilizing the area and preventing environmental hazards.
Yes, geogrids are suitable for use in railway ballast reinforcement. Geogrids are designed to provide structural support and increase the stability of railway ballast. They help distribute loads and prevent lateral movement of the ballast, enhancing the overall performance and longevity of the railway track.
Sampling method of Geogrid
Sampling shall: in this batch of products were randomly selected from 3 volumes, the width and visual inspection in the inspection of qualified samples taken a roll, remove the outer layer length 500mm, intercept the full width of product 1m as mechanical properties; interception of full width of product 5m as test sample setting.
Who knows the laying method of geogrid?
The first layer of geogrid paved, began to fill with second layers of 0.2m in thick sand (coarse), the method of sand transport to the site: car unloading to the subgrade side, then put forward to push the bulldozer, within 2 meters on both sides of the subgrade filling after 0.1M, the first layer of Geogrid are folded up then fill in 0.1 meters (coarse) sand, prohibit filling and promote both sides to the middle, prohibit all mechanical without filling (coarse sand) of Geogrid on traffic operation, it can guarantee the geogrid is smooth, does not play drums, do not wrinkle, stay in the second layer (coarse) after the formation of sand to prevent, level measurement, uneven fill thickness, to be leveling correct 25T vibratory roller pressure two times. (5) as the second layer of geogrid layer construction method with the first method, and finally filling in 0.3m (coarse sand), filling in the same way as the first layer, using 25T hydrostatic roller two times, so subgrade reinforcement is dealt with. (6) in the third layer (coarse sand) after rolling, along the line in the longitudinal slope on both sides of the geogrid two, overlapping 0.16m, and connected with the same method, and then start the earthwork construction work, laying geogrid in slope protection, each layer must measure the laying of lines, each side to ensure the slope renovation of geogrid buried in slope soil 0.10m. (7) when the geogrid is filled with two layers of soil, that is to say, the thickness of 0.8m is required to lay a layer of geogrid at the same time on both sides, and so on. (8) the Subgrade after timely slope renovation, and dry rubble slope protection, in addition to each side of the roadbed...
What is the difference between Geogrid TGSG and GSL?
TGSG is the national standard GB/T17689-2008 double plastic geogrid code