Hard Alloy Machine Chucking Reamer with Straight Shank
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 Sets pc
- Supply Capability:
- 1000 Sets per Month pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Detailed Product Description
1.Good quality
2.Welding hard alloy hole machining tools
3.Competitive price
4.Excellent after-sales service
Machine Chucking Reamer With The Straight Shank
Carbide Machine chucking reamer it mainly used in processing common steel, cast metal and nonferrous metal, as well as Alloy steel, Titanium alloy, etc.
Order No. |
D |
H7 |
H8 |
H9 |
d(h9) |
L |
L1 |
No.Of Teeth |
1201·001/0617 |
6 |
+0.012
+0.007
|
+0.018
+0.011
|
+0.030
+0.019
|
5.6 |
93 |
17 |
4 |
0717 |
7 |
+0.015
+0.009
|
+0.022
+0.014
|
+0.036
+0.023
|
7.1 |
109 |
17 |
4 |
0817 |
8 |
8.0 |
117 |
17 |
4 | |||
0917 |
9 |
9.0 |
125 |
17 |
4 | |||
1017 |
10 |
10.0 |
133 |
17 |
4 | |||
1117 |
11 |
+0.018
+0.011
|
+0.027
+0.017
|
+0.043
+0.027
|
10.0 |
142 |
17 |
4 |
1220 |
12 |
10.0 |
151 |
20 |
4 | |||
1320 |
13 |
10.0 |
151 |
20 |
4 | |||
1420 |
14 |
12.5 |
160 |
20 |
4 | |||
1520 |
15 |
12.5 |
162 |
20 |
4 | |||
1201·002/1625 |
16 |
12.5 |
170 |
25 |
6 | |||
1725 |
17 |
14.0 |
175 |
25 |
6 | |||
1825 |
18 |
14.0 |
182 |
25 |
6 | |||
1925 |
19 |
+0.021
+0.013
|
+0.033
+0.021
|
+0.052
+0.033
|
16.0 |
189 |
25 |
6 |
2025 |
20 |
16.0 |
195 |
25 |
6 |
Note: When placing order, be sure of the processing steel, through-hole and blind hole, otherwise it will be as per the common steel and through-hole reamer.
- Q:Processing materials for aluminum parts, unilateral processing allowance of 0.7 mm, four blade is indeed higher machining accuracy, but the row cutting than the three blade almost
- Reaming should be four edged reamer, because it is finished, and the blade is a little better
- Q:With a machining center, the diameter of the hole is 28, and the cutting amount of the reamer when reaming
- According to what you said, what you said was boring. How did you say it was twisted?I said one of my experiences: if boring, the speed is about 500. Feed 70.If the speed is 60, when feeding 40, if you want the correct tolerance, add lubricating oil. Minus tolerance plus cutting fluid, with kerosene, too.
- Q:Can we use milling cutters instead of reamer to process holes, the accuracy of holes H7
- With the milling cutter hole processing, smoothness, wear resistance and hole verticality without reamer processing is good, so if only a small amount of processing holes, or the requirements of the hole is not very high, then use the milling cutter will also go.
- Q:The problem of poor chip removal, special reamer scraps can not be found out. What's the main problem?
- Reaming is not large, resulting in little chip; most of the reamer is a straight edge, even with a spiral angle reamer is not in order to chip (although there is a certain chip removal effect). It's usually artificial chip removal.
- Q:NC machining, the speed and feed of the reamer
- There is no accurate data, only experience,,Question is not very professional, do not know how much,With the material, but also with clamping rigidity, tool rigidity, tool size, margin, the requirements of the accuracy of the drawings and so onNot a unified answer, in fact, the actual situation depends on the processing of the scene to determine the speed and feed,Adjust at any timeNow let me tell you something about my operation. I do horizontal boring and millingGray iron, milling cutter, assuming 200--300, speed 100--200, the fastest 250 mm depth of 10 mm 1--2 feedDrilling, high-speed steel drill bit, 40 bit, speed 60--150 between 0.4--1 mm, as the size of the drill changes, the speed and feed will also change,End mills and keyway cutters, speed 60--80, feed 0.4--0.8Boring, boring. Assuming the diameter of 100 holes, boring bar 60 thick, length 200, speed 200--300, feed 0.26--0.63 precision boring: margin 0.8--1.2, speed 350--550., feed 0.1--0.17Reamer, cutting allowance 0.1, add oil, feed speed 15--30, 0.6--1.5 mmThe above is my experience, the premise is that you must sharpen the tool,I always feel like a clip on a knife, and I don't always have the tools to sharpen it by hand
- Q:Please enlighten brother snow reamer 150125110 motorcycle valve is not universal and how the hinge valve
- Motorcycle valve reamer is a set of the above several cars can be common.Reaming the valve is the best way to find a local repair car or motorcycle master, which is not clear here.Generally use 75 degrees, then 15 degrees and 45 degrees of reamer, and finally the effect after reaming, and then use several tools to trim. Use 45 degrees to the right contact width of reamer, reamer can take 15 degrees contact hinge low 75 degree knife to contact surface to improve the contact surface, preferably 1 mm or so, if it is too wide for 15 degrees and 75 degrees of cutting narrow. After reaming, grind the valve and check the seal.
- Q:Machining center with 4MM and 6MM white steel reamer, 45 steel material, spindle speed and feed speed settings how much ah!
- On such a small hole with white steel, with steel spiral machining cutter Wu did not know, processing thousands of hole can not use a knife, also used a certain blind hole you don't end up blowing again twisted twisted down will be a good point, cutting knife is mainly iron row is not good, or high speed feed slow knife wear quickly........................ there are.....
- Q:How can the reaming of stainless steel extend the life of the reamer and allow Kong Guangliang to help with various problems?
- Cooling and cooling are needed during processing. Coolant and lubricating fluid are needed
- Q:To machining M8, blank hole reamer processing thread with what specifications of the machine (bottom)?
- I don't know if you screw precision processing, is the common thread that was not necessary, the direct use of the 6.5 bit can be, if you have high precision, with 6.3 bit, and then use the straight edge reamer 6.7.
- Q:The sale of these spiral reamer (punch) is illegal? Crime?12 blade spiral reamer, right helix 2-3 degreesFront diameter 5.45 to 5.5 mm, rear diameter 5.40 to 5.5 mm, middle diameter 5.75 mm, line depth 0.1mm or so
- I don't see the thing, but there's one principle: it's lethal! For example, if you have this thing, it is sharp... Long, let's see, you know, this thing is used to kill people... OK, suspected of committing a crime, may constitute a crime of illegally controlling a knife.
We developed small high-precision CNC lathes based on the imported technology, with high-quality accessories and universal electric control systems. Our machine tools are mainly used in aviation, automobiles, electron, clocks, optical instruments, moulds, computers, medical equipment and so on. At present, these machine tools are enjoying a good reputation among our customers. Accessories and tools are the basic of high-quality precision machinery.
1. Manufacturer Overview |
|
|---|---|
| Location | Shaanxi,China |
| Year Established | 2010 |
| Annual Output Value | Below US$1 Million |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | 1% - 10% |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Hard Alloy Machine Chucking Reamer with Straight Shank
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 Sets pc
- Supply Capability:
- 1000 Sets per Month pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
