Weaving Machinery I
- Loading Port:
- China Main Port
- Payment Terms:
- TT
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 2 Sets Per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification of Weaving Machinery I
1. special medical gauze & bandage weaving machine,plain fabric
2. Machine working width:150cm
3. Fabric max width:145cm
4. Fabric min width:80cm
5. R.P.M:500-600
6. Mechanical take-up,mechanical let-off
7. Thread count:7-20pick per inch
8. Cotton yarn:25s-40s
9. warp beam diameter:800mm ,cloth roller diameter will be 800mm at most.
10. if install big package,the cloth roller diameter will be 1200mm at most.
11. Production capacity:depends on thread count and R.P.M
e.g thread count is 15pick per inch,R.P.M is 600.the production per hour should be 61m/h
Mostly,the production capacity is more than 1000 meter per day.
10. loom motor power:1.3kw
11. electricity consumption:1.5kw/h
12. air consumption:0
13.one air pump is installed in the machine
Packaging & Delivery of Weaving Machinery I
Packaging Detail: wooden and thin film coverage
Delivery Detail: within 15 days after received 30% T/T advance
Introduction of Weaving Machinery I
It is the professional development of new models, with outstanding stability and high speed in making high-density and thick fabric,electronic feeder and dobby devices can be installed on it.
- Q:What is the effect of the centrifugal fan on the wind pressure?
- In contrast, when the fan outlet is small, the air volume decreases, the wind pressure increases and the power decreases.
- Q:How to determine the direction of centrifugal fan?
- When the impeller is clockwise rotation and the fan outlet in the lower left to the horizontal direction when the gas is called the right 0 degrees
- Q:What is the reason for the vibration of the fan?
- Impeller itself irrational structure, such as the number of even into the number of leaves,
- Q:What is the role of the blower in the sewage treatment plant?
- In the operation of the pressure difference using the blower automatically lubricated to the drip nozzle, drip into the cylinder to reduce friction and noise, while keeping the cylinder gas does not return, such a blower, also known as the vane blower.
- Q:What is the operation of centrifugal fans and axial fans?
- In a single stage centrifugal fan, the gas enters the impeller from the axial direction, and the gas flows into the radial direction through the impeller and then enters the diffuser. In the diffuser, the gas changes the flow direction to cause deceleration, which slows the kinetic energy into pressure energy
- Q:Can an axial fan fit on the glass?
- No matter where the installation of the fan, are the need to support the framework.
- Q:What types of fans are usually divided into?
- Fan classification can be divided into centrifugal, axial, oblique flow (mixed flow) and cross flow type according to the direction of gas flow.
- Q:What is the difference between general-purpose inverter and fan-type inverter
- The constant power region and the constant torque region of the load have a great influence on the selection of the transmission scheme. Motor in the constant flux control, the maximum allowable output torque unchanged, are constant torque speed
- Q:How to deal with axial fan noise?
- The turbulence of the fan in operation will also produce a part of the noise, eddy current noise is mainly due to a certain turbulence flow of gas flow to the blade when the flow turbulence noise. Airflow through the blade surface due to pulsating turbulent surface layer of turbulence generated boundary layer noise and some other reasons.
- Q:What is the difference between a volute fan and a centrifugal fan?
- Centrifugal fan cover is a volute, is to increase its static pressure head and high pressure section of the fan efficiency. After the volute centrifuge fan removed the volute, the majority of the air volume range (high pressure area) of the static pressure head is lower than the centrifugal fan with a volute
1. Manufacturer Overview |
|
---|---|
Location | Yantai, China |
Year Established | 1997 |
Annual Output Value | 500Setyear |
Main Markets | Mid East; Eastern Europe; Westen Europen |
Company Certifications | ISO 9001 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Qingdao |
Export Percentage | 40% |
No.of Employees in Trade Department | 1000 People |
Language Spoken: | English; Chinese |
b)Factory Information | |
Factory Size: | 50000square meters |
No. of Production Lines | Above20 |
Contract Manufacturing | OEM Service Offered |
Product Price Range | Average |
Send your message to us
Weaving Machinery I
- Loading Port:
- China Main Port
- Payment Terms:
- TT
- Min Order Qty:
- 1 Set set
- Supply Capability:
- 2 Sets Per Month set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords