Welding Rod Electrodes AWS E6013 Best Quality Factory Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Welding Rod Description：
E6010 This electrode is used for all position welding using DCRP.
produces a deep penetrating weld and works well on dirty,rusted, or painted metals
E6011 This electrode has the same characteristics of the E6010, but can be used with AC and DC currents.
E6013 This electrode can be used with AC and DC currents.
produces a medium penetrating weld with a superior weld bead appearance.
E7018 This electrode is known as a low hydrogen electrode and can be used with AC or DC.
The coating on the electrode has a low moisture content that reduces the introduction of hydrogen into the weld. lectrode can produce welds of ray quality with medium penetration.
(Note, this electrode must be kept dry. If it gets wet, it must be dried in a rod oven before use.)
Usage:
1.Sheet metal
2.Irregular short welds that change positions
3.Maintenance or repair welding
4.For use with small AC welders with low smoke
2.Main Features of Welding Rod：
• All-position electrode for the welding of mild steel.
• Excellent choice for sheet metal lap and fillet welds
• Easy slag removal. low smoke.
3. Welding Rod Images
4. Welding Rod Specification
Chemical Composition | C | Mn | Si | S | P |
Guarantee Value | ≤0.12 | 0.3-0.6 | ≤0.35 | ≤0.035 | ≤0.040 |
Mechanical Properties of Deposited Metal
Test Item | Rm(MPa) | ReL(Mpa) | A(%) | KV2(J) | KV2(J) |
Guarantee Value | ≥420 | ≥330 | ≥17 | -(normal temperature) | -(0℃) |
Reference Current (AC, DC)
Electrode Diameter(mm) | φ2.0 | φ2.5 | φ3.2 | φ4.0 | φ5.0 |
Length(mm) | 300 | 300(350) | 350 | 400 | 400 |
Welding Current (A) | 40~70 | 55~95 | 80~130 | 120~180 | 160~230 |
V-up, OH | 35~60 | 45~90 | 60~120 | 100~160 | 120~200 |
5.FAQ
Q: How do you ship the Welding Rod?
A: Usually by sea.
Q: Are you a manufacturer?
A: Yes, we have been in providing the professional products in Welding Rod over 10 years.
Q: Can I get the sample?
A: Yes, free samples are prepared for your test.
- Q:What kind of welding rod is used for No. 55 steel?
- To choose J506 or J507 welding rod, preheat 150~200 degrees before welding, heat preservation after welding. Or choose the electrode with higher strength grade
- Q:A022 what kind of material is the welding rod?
- Brand A022 welding rod model is E316L-16, can weld 0Cr18Ni12Mo2Ti material (recommended according to JB/T4709)
- Q:Is it used for welding power plant construction?
- Commonly used electrode modelClassification of arc welding electrodesclassification methodClass namePower typeCharacteristic letters and expressionsClassification of ingredients according to the formulaUnshapedNot specifiedTitania typeAlternating current and direct currentCalcium titaniumAlternating current and direct currentIlmenite typeAlternating current and direct currentFerric oxideAlternating current and direct currentCellulose typeAlternating current and direct currentLow hydrogen potassium typeAlternating current and direct currentLow hydrogen sodium typeDirectGraphite mouldAlternating current and direct currentBase typeDirectClassification of slag acidity and basicityAcid welding rodBasic electrodeClassification by electrode usagecovered electrode for structural steelJ * x *Molybdenum and chromium molybdenum heat resistant steel welding rodR * x *Stainless steel electrodeG * x *A * x *Surfacing electrodeD * x *Low temperature steel electrodeW * x *Cast iron welding rodZ * x *covered electrode for nickel and nickel alloyNi * x *covered electrode for copper and copper alloyT * x *Aluminium and aluminium alloy welding rodL * x *Special electrodeTS * x *Classification of welding rod propertiesUltra low hydrogen electrodeLow dust and low toxic electrodeVertical down electrodeBottom electrodeIron powder high efficiency welding rodTide resisting welding rodSubmerged electrodeGravity welding rodWelding rod
- Q:How many kinds of welding rod are there? What's the name? What is the use?
- There are many kinds, not less than 100 kinds, welding plastic, cast iron, ordinary steel, alloy steel, stainless steel, etc.
- Q:What electrode does Q235 use?
- According to the classification of the characteristics of the slag after the electrode is melted, the welding electrode can be divided into an acid welding rod and an alkaline welding rod. The main component of acid electrode coating is acid oxide, such as Q235 low carbon steel. When welding important structural parts, E4315, E4316, E5015 and E5016 should be selected according to different welding conditions.Q235 is a carbon structural steel, which is equivalent to the A3 and C3 steel in the old standard GB700-79, and is used in the Russian TOCT brand. The grade Q represent in yield strength. Normally, the steel is not used directly after heat treatment.
- Q:Electrode whitening what reason?
- Damp, drug ingredients skin ran out.
- Q:3.2 how much is a package of bridge electrode
- This depends on what kind of electrode, such as J422 welding rod, 3.2mm package is five kg, the price is about twenty yuan. If it is J507 electrode and so on, the price will be higher, such as A132 and other stainless steel prices will be much higher.The electrode (coveredelectrode), is the metal coating in the welding core (coating), uniform centripetal pressure applied to core. The core metal cored electrode, in order to ensure the quality and performance of the weld, there are strict rules on the contents of metal elements in the core, especially for harmful impurities (such as sulfur, phosphorus content, etc.) should be strictly restricted, better than the base metal. The electrode consists of two cores and coating composition. The different cores are also different. The core components directly affect the composition and properties of the weld metal, so the harmful elements in the welding core to as little as possible.For welding of carbon steel and low alloy steel welding core, are mostly made of low carbon steel as the core, and adding manganese, silicon, chromium, nickel and other components (see wire national standard GB1300 - 77). The reason of low carbon is a low carbon steel wire plastic, wire drawing is relatively easy, on the other hand can reduce the CO content of reducing gas, reduce spatter or porosity and increased weld metal solidification temperature, favorable for overhead welding. The addition of other alloy elements mainly guarantees the comprehensive mechanical properties of the weld, and also has some effect on the welding process performance and the removal of impurities.
- Q:Why is the electrode almost finished? Each time there is a little left?
- Normal, the final electrode about 5 centimeters affect the welder's line of sight, and butt welding to hurt, easy to make welding temperature rise accelerated, influence continuous welding
- Q:What type of welding rod is applied to Q345 steel plate?
- Q345 steel plate is welded with J506 or J507 electrode.J506 is a low hydrogen potassium electrode, it is a kind of basic electrode, welding steel structure and the typical Q235, Q245R, Q345 steel, the tensile strength of E4315 is much larger relative to the common electrode, so the general welding force or by welding steel structure of dynamic load.J506 welding rod diameter ranging from 2.5mm to 6.0mm, can be carried out in all position welding, welding using alternative welding machine.The weld formation after J506 welding is more difficult than that of the acid welding rod. If an electrode is used on the cover of the steel structure, the acid electrode can be used.J507 is a low sodium hydrogen electrode, it is a kind of basic electrode, can be Q235, Q245R, Q345 typical welding structure steel in steel, the tensile strength of E4315 is much larger compared to the common electrode, so the general welding force or under dynamic load of steel structure.J507 welding rod diameter ranging from 2.5mm to 6.0mm, can be carried out in all position welding, welding using DC welder, polarity reversal. Of course, if there is only AC welder in the field, AC welder can be used, but the current needs to be switched on.The weld formation after J507 welding is more difficult than that of the acid welding rod. If an electrode is used on the cover of the steel structure, the acid electrode can be used.
- Q:Why is the welding of important structure using alkaline electrode?
- Alkaline is a low hydrogen electrode, which can control the hydrogen content in the weld, avoid hydrogen embrittlement and lead to structural failure. Hydrogen embrittlement is the sudden breaking of the weld force
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Welding Rod Electrodes AWS E6013 Best Quality Factory Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
