BFL-Micro Grain Rough End Mill Coated Flute Rough CNC Milling End Mill Cuter
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
HRC45 | HRC55 | HRC60 | HRC65 |
YG10X | YL10.2 &WF25 | Germany K44 &K40 | Sandvik H10F |
Grain size 0.7um, Co10%, , Flexural strength 3320N/mm2 | Grain size 0.6um, Co10%, Flexural strength 4000N/mm2 | Grain size 0.5um, Co12%, Flexural strength 4300N/mm2 | Grain size 0.5um, Co10%, Flexural strength 4300N/mm2 |
Specification of milling cutter
- Milling tool
- Material:High Quality Carbide
- Profiling, Center Cutting
- Higher Wear Resistance
Milling Cutting tool
- Application: suitable for processing various materials.
- Best material: we use the import material, AF,SANDVIK,KENNAMETAL,CB,etc.
- Quality:all our manufactured end mills are inspected by advanced zoller mearsurement.
- Facility:we have the world lastest 5-axis tools grinding machines.
- Flexbility:non-standard sizes are accepted.
- Q:Why is it that someone else grinds a lathe for a few months and the car comes out smooth, and I've worn it for more than a decade
- The cutting of the knife is too connected with the sharpening knife, the cutting knife, the fine turning knife, the rough tool, the car what material chooses which knife, the blade that grind what kind of knife is not finished at the moment.
- Q:The welding method of lathe tool?
- First ensure smooth knife sets, after burning red in the welding place sprinkle with borax, with copper electrode in the knife sets even a thin layer of copper welding, and then sprinkle a little borax and put the blade heating, after waiting for blade burned to fill the gaps with electrode using borax, pay attention to the dosage of copper, the less the better.
- Q:How do you weld the car knife
- Use neutral flame when welding, and the energy size is chosen according to the size of the vehicle. 2, when heated, flame core distance blade 3-5 mm, heated the blade, cutting head is heated with embers, (segment of small size, easy to heat, the temperature is too high, the oxidation of the cutting tools);
- Q:What kind of alloy is the car knife used?
- Tungsten cobalt class (WC + Co) carbide (YG) is composed of WC and Co, it has high bending strength toughness, good thermal conductivity, but poor heat resistance and abrasion resistance, mainly used for processing cast iron and nonferrous metals. Fine grain of YG carbide (such as YG3X, YG6X), in the cobalt content in phase at the same time, its high hardness, wear resistance than YG3, YG6, strength and toughness is a bit poor, suitable for processing hard cast iron, austenitic stainless steel, heat-resistant alloy, hard bronze, etc.
- Q:What is the Angle of the threading tool?
- The metric system thread is 60 degrees, the English thread 55 degrees, the trapezoidal thread 30 degrees, the metric worm 40 degree, and the English worm 29 degrees.
- Q:What are the advantages of welding knives
- Nc is not the car with indexable insert now, he is the main advantage of tool change time is short, processing speed, the blade of long life, like this can maximum play to the function of the machine tool, to reduce the depreciation of the machine tool.
- Q:In the work of the car, the tip of the blade and the center of the workpiece have any impact on the workpiece roughness.
- The tip of the knife is higher than the center of the workpiece, and the finish will be better because of the continuous contact with the workpiece. It is below the center of the workpiece, because only the cutting edge cuts the workpiece, the smooth finish is not good.
- Q:What is the difference between the Angle of the lathe and the Angle of work
- Angle of annotation: the Angle of the tool is made and the cutting edge of the tool is required, and the Angle of marking on the tool design diagram is given.
- Q:What is the basic blade of a lathe
- There is a special blade for sale. When you buy it, he will ask you what blade you want, whether it is a cast-iron or a new one
- Q:The difference between the Angle of the blade and the Angle of the blade
- This is two different angles, the front Angle is the Angle of the knife, the blade Angle is the Angle of the blade.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
BFL-Micro Grain Rough End Mill Coated Flute Rough CNC Milling End Mill Cuter
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords